Migrating from openHAB to Home Assistant



  • Hi,

    I am migrating from openHAB to Home Assistant to today I took the the first steps towards MySensors network. MySensors are running in TCP mode on Arduino since a long time. I think I have 2.1.1 of MySensors...it have been so stable and have not patched it for a very long time.

    So installed the add-on and configured it as:

    mysensors:
      gateways:
        - device: '192.168.1.11'
          persistence_file: './mysensors.json'
          tcp_port: 5003
      optimistic: false
      persistence: true
      retain: true
    

    Restarted one sensor to ensure presentation but the only thing I get in HA logs is

    Log Details (WARNING)
    Logger: mysensors
    Source: __main__.py:356
    First occurred: 5:32:30 PM (20 occurrences)
    Last logged: 5:35:29 PM
    
    Node 49 is unknown
    Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    Node 3 is unknown
    Node 4 is unknown
    

    Do you have any good hints/tips?



  • You could try to specify the protocol version in the hinge assistant configuration file.
    https://www.home-assistant.io/integrations/mysensors/#version



  • Tried to set

    mysensors:
      gateways:
        - device: '192.168.1.11'
          persistence_file: './mysensors.json'
          tcp_port: 5003
      optimistic: false
      persistence: true
      retain: true
      version: '2.1.1'
    

    But get in logs a lot of:

    2020-05-26 17:32:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:32:40 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:32:50 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:10 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:39 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:33:50 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:10 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:13 WARNING (MainThread) [mysensors] Node 3 is unknown
    2020-05-26 17:34:13 WARNING (MainThread) [mysensors] Node 3 is unknown
    2020-05-26 17:34:14 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:34:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:33 WARNING (MainThread) [mysensors] Node 4 is unknown
    2020-05-26 17:34:46 WARNING (MainThread) [mysensors] Node 3 is unknown
    2020-05-26 17:34:49 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:34:49 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:53 WARNING (MainThread) [mysensors] Node 4 is unknown
    2020-05-26 17:35:09 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:35:24 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:35:29 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:35:49 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:35:53 WARNING (MainThread) [mysensors] Node 3 is unknown
    

    But also

    Log Details (ERROR)
    Logger: homeassistant.components.sensor
    Source: components/mysensors/sensor.py:92
    Integration: Sensor (documentation, issues)
    First occurred: 6:46:09 PM (4 occurrences)
    Last logged: 6:46:50 PM
    
    Error while setting up mysensors platform for sensor
    Traceback (most recent call last):
      File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 186, in _async_setup_platform
        await asyncio.gather(*pending)
      File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 295, in async_add_entities
        await asyncio.gather(*tasks)
      File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 446, in _async_add_entity
        entity.async_write_ha_state()
      File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 297, in async_write_ha_state
        self._async_write_ha_state()  # type: ignore
      File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 326, in _async_write_ha_state
        unit_of_measurement = self.unit_of_measurement
      File "/usr/src/homeassistant/homeassistant/components/mysensors/sensor.py", line 92, in unit_of_measurement
        float(self.gateway.protocol_version) >= 1.5
    ValueError: could not convert string to float: '2.1.1'
    


  • Hmmm, could it be a problem that my old openHAB installation still is active?
    Will MySensors Gateway handle different "consumers"?



  • @jocke4u said in Migrating from openHAB to Home Assistant:

    But get in logs a lot of:
    2020-05-26 17:32:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:32:40 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:32:50 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:10 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:33:39 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:33:50 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:10 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:13 WARNING (MainThread) [mysensors] Node 3 is unknown
    2020-05-26 17:34:13 WARNING (MainThread) [mysensors] Node 3 is unknown
    2020-05-26 17:34:14 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-26 17:34:30 WARNING (MainThread) [mysensors] Node 49 is unknown
    2020-05-26 17:34:33 WARNING (MainThread) [mysensors] Node 4 is unknown

    These are caused by the nodes not correctly being presented to home assistant.
    Check https://www.home-assistant.io/integrations/sensor.mysensors/ for some examples of what the sketch should do so it is recognised by home assistant.
    Mainly presenting the sensors and sending a value to the controller.



  • Thanks @electrik for the update 🙂
    I got it running.
    However I think I should make some work on the sensors.
    As it seems the Ethernet GW are running 2.1.1 but I think the sensors are running 1.5.x (seen in MysController)

    But I get plenty of :

    2020-05-28 19:29:47 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:30:22 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:30:57 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:31:32 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:32:07 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:33:17 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:33:51 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:34:26 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:35:01 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:35:36 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:36:11 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:36:46 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:37:21 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:38:31 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:39:06 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:39:41 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    2020-05-28 19:40:50 WARNING (MainThread) [mysensors] Not a valid message: value must be float between 0.0 and 100.0 for dictionary value @ data['payload']
    

    Trying to get my dev environment correct to be able to recompile.

    EDIT: Since it have been so stable for a long time I am not up to date with the Arduino environment. My experience from the past is not without issues


Log in to reply
 

Suggested Topics

36
Online

11.2k
Users

11.1k
Topics

112.5k
Posts