I NEED TO CHANGE ATTRIBUTE, V_VAR1 ON MY NODE (MYSENSORS) SERIAL. HOW CAN DO THAT WITH NODE-RED IN HA. I JUST WANT TO CHANGE VALUE BECAUSE I DON'T SEE ANY SERVICE CAN DO THAT.
Hi,
Thank for your reply. Yes, i run since many years with a serial Gateway connected with my PI.
I thought it was possible to use the same machine to remove this extra element.
If you had a stability issue, I would just stick with my current formula and not change everything for now.
Regards,
@badisensors I have this same issue and am struggling to find a consice answer to the question. Have you figured it out?
I would love to see a bit more detail about the important naming and numbering protocals for Gateways, Nodes, Sensors, and their output values within the MySensors architecture. So far, I am not finding much and progress is slow when I simply need to try different iterations and make conclusions/adjustments.
hey,
sorry for late reply. PR for mysensors is ready to be merged:
https://github.com/mysensors/MySensors/pull/1570
next step is create PR in mysensors integration for home assistant.
Best regards
Mariusz
Hey @OldSurferDude
I think we have a missunderstanding here. I have my gateways running on ESP32. When I add the integration I can enter the IP in this dialog:
If you want to change the IP number of the gateway (or the MQTT topic or the serial port), there is no way to do this: