My first 3D printed PIR enclosure

[Ashley Savage]

been tinkering away for a little and loving this project.
decided on the need for a nice enclosure for my 1st PIR project, at this stage only PIR.. plan for temp, and any other suggestions... its a screw top, so base will be screwed to ceiling, when batteries need replacing, just unscrew cap and change.
Attached are the STL's for all with access to a printer and keen on giving it a crack... love your feed back, and or sketch with temp and anything else...
PIR_V4_Base.stl
PIR_V4_Top.stl
enjoy

its a

[hugo_pn]

Wow,

Good job. The batteries are too big

[RJ_Make]

@Ashley-Savage Nice Job... Where are the mounting holes for the base?

[Qu3Uk]

I should get a 3D printer.

My PIR is just a board at the moment as I've not been able to find a good enough box.

[Ashley Savage]

@ServiceXp said:

holes

haha yeah good call... give this one a goPIR_V4_Base_holes.stl