My Sensor node "motherboard" (MySensorsNode)
-
@rozpruwacz
I've made some test. It looks that bootloader is "damaged" ONLY if sketch is loaded using programmer (USBASP in my case). If sketch is loaded via serial and bootloader all is fine. So correct usage should be:- Program DualOptiboot bootloader using programmer
- Upload sketch using serial port and DualOptiboot bootloader
@bilbolodz LOL, You are absolutely right :D thats why it is called "Dual" :P because it can also boot from the serial port ... thanks !!
-
EDIT: BOMs are now uploaded as well. I have to inspect the gerbers one more time but it is close to manufacture now :)
@Anticimex
Could you please:- Point me to drop in replacement for DMP3056L-7? It's hard to get in my area...
- Tell where can I buy SI7021 chip?
-
@Anticimex
Could you please:- Point me to drop in replacement for DMP3056L-7? It's hard to get in my area...
- Tell where can I buy SI7021 chip?
@bilbolodz you find all sourcing information I have on github
-
@Anticimex
Could you please:- Point me to drop in replacement for DMP3056L-7? It's hard to get in my area...
- Tell where can I buy SI7021 chip?
@bilbolodz said in My Sensor node "motherboard" (MySensorsNode):
SI7021
fo the transistor search for P-CHANNEL MOSFET with Low On-Resistance (the lower the better, the DMP3056L has 500mOhms) and the transistor must be rated for voltage grater than your power supply (Drain-Source Voltage parameter in datasheet, which is negative value but think of it as it would be positive)
-
@bilbolodz you find all sourcing information I have on github
@Anticimex I've checked it but in most cases all sources you've mentioned have very expensive shipment to Poland.
How about DMP3056L-7 replacement? I've found it on aliexpres but shipment are twice such expensive as 35 pieces of transistor. -
@Anticimex I've checked it but in most cases all sources you've mentioned have very expensive shipment to Poland.
How about DMP3056L-7 replacement? I've found it on aliexpres but shipment are twice such expensive as 35 pieces of transistor.@bilbolodz You can buy an SI7021 module and desolder it :D https://botland.com.pl/czujniki-temperatury/6554-si7021-czujniki-temperatury-i-wilgotnosci-i2c-sparkfun.html
-
@rozpruwacz said in My Sensor node "motherboard" (MySensorsNode):
SI7021
Found it on ebay:
http://www.ebay.com/itm/SI7021-A10-GM1R-Digital-Temperature-and-Humidity-Sensor-Module-F-Arduino-Si7021-/132179773960?hash=item1ec6874a08:g:oL0AAOSw~y9ZCf9oStill looking for good source of DMP3056L-7 or replecement
-
I cannot help on country specific sourcing alternatives. It would be impossible for me to create a list for the cheapest sourcing alternatives for every country. You have all part information in the BOM. So it should be relatively easy for you to search the parts. And if you want alternatives, do a parametric search at your preferred suppliers.
-
Do you have suggestion how to mount RFM69 radio module? "Standard" 2.54 gold pin won't fit....
@bilbolodz well, no it is 2mm pitch.
