Pellet Burner Monitor using MySensors and OpenHAB
CarstenA last edited by
This project monitors a Pellet Burner using MySensors and OpenHAB.
Alarms are sent to smartphones or PC's using Pushover. In the OpenHAB control panel, it is possible to see the Pellet Burner status, and if any alarms are present. Furthermore, the last startup time and run time of the pellet burner is shown.
The project aims at an non-invasive approach to monitor of the pellet burner control panel. I use photoresistors in a 3D printed fixture, mounted in front the pellet burner control panel, to monitor the state of the LEDs. The burner control panel has a dedicated alarm output, that I use.
My GitHub wiki contains a more detailed description of the project: https://goo.gl/L3LjaO