Framework multi sensor/actuator
-
Here is a small contribution. A arduino framework for making almost every sensor or actuator you ever need.
It is still a work in progress so any help is usefull.
/** * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2015 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * original version by Meister_Petz * Version 1.0 - May 5, 2016 - Ton van den Berg * * DESCRIPTION * This sketch provides a framework for multisensor * * */ #include <MySensor.h> #include <SPI.h> MySensor gw; // Manual set node id // Change node id for each node. int NodeID = 20; // Child ID s - Triggers - Buttons, Motion Sensors... /* #define TRIGGER1_ID 1 // Trigger 1 #define TRIGGER2_ID 2 // Trigger 2 #define TRIGGER3_ID 3 // Trigger 3 #define TRIGGER4_ID 4 // Trigger 4 #define TRIGGER5_ID 5 // Trigger 5 #define TRIGGER6_ID 6 // Trigger 6 #define TRIGGER7_ID 7 // Trigger 7 #define TRIGGER8_ID 8 // Trigger 8 #define TRIGGER9_ID 9 // Trigger 9 */ // Child ID s - Actuators - Relays, LEDs,... /* #define ACTUATOR1_ID 11 // Actuator 1 #define ACTUATOR2_ID 12 // Actuator 2 #define ACTUATOR3_ID 13 // Actuator 3 #define ACTUATOR4_ID 14 // Actuator 4 #define ACTUATOR5_ID 15 // Actuator 5 #define ACTUATOR6_ID 16 // Actuator 6 #define ACTUATOR7_ID 17 // Actuator 7 #define ACTUATOR8_ID 18 // Actuator 8 #define ACTUATOR9_ID 19 // Actuator 9 */ // Child ID s - Continuous Sensors - Temperature Sensors, Lightlevel Sensors,... /* #define SENSOR1_ID 21 // Sensor 1 #define SENSOR2_ID 22 // Sensor 2 #define SENSOR3_ID 23 // Sensor 3 #define SENSOR4_ID 24 // Sensor 4 #define SENSOR5_ID 25 // Sensor 5 #define SENSOR6_ID 26 // Sensor 6 #define SENSOR7_ID 27 // Sensor 7 #define SENSOR8_ID 28 // Sensor 8 #define SENSOR9_ID 29 // Sensor 9 */ // Child ID s - Dimmers, ... /* #define DIMMER1_ID 31 // dimmer 1 #define DIMMER2_ID 32 // dimmer 2 #define DIMMER3_ID 33 // dimmer 3 #define DIMMER4_ID 34 // dimmer 4 #define DIMMER5_ID 35 // dimmer 5 #define DIMMER6_ID 36 // dimmer 6 #define DIMMER7_ID 37 // dimmer 7 #define DIMMER8_ID 38 // dimmer 8 #define DIMMER9_ID 39 // dimmer 9 */ //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- // DEFINITIONS //----------------------------------------------------------------------------------------------------------- //------------------------------------------------------------------------ // Triggers - Triggers - Triggers - Triggers - Triggers - Triggers //------------------------------------------------------------------------ // DEFINITIONS - Push Buttons, Door Sensors,... #include <Bounce2.h> // Trigger PINS - Digital PIN -> Button -> GND /* #define TRIGGER1_PIN 7 #define TRIGGER2_PIN 7 #define TRIGGER3_PIN 7 #define TRIGGER4_PIN 7 #define TRIGGER5_PIN 7 #define TRIGGER6_PIN 7 #define TRIGGER7_PIN 7 #define TRIGGER8_PIN 7 #define TRIGGER9_PIN 7 */ // Bounce /* Bounce debouncer1 = Bounce(); Bounce debouncer2 = Bounce(); Bounce debouncer3 = Bounce(); Bounce debouncer4 = Bounce(); Bounce debouncer5 = Bounce(); Bounce debouncer6 = Bounce(); Bounce debouncer7 = Bounce(); Bounce debouncer8 = Bounce(); Bounce debouncer9 = Bounce(); */ // MyMessage /* MyMessage msg01(TRIGGER1_ID,V_TRIPPED); MyMessage msg02(TRIGGER2_ID,V_TRIPPED); MyMessage msg03(TRIGGER3_ID,V_TRIPPED); MyMessage msg04(TRIGGER4_ID,V_TRIPPED); MyMessage msg05(TRIGGER5_ID,V_TRIPPED); MyMessage msg06(TRIGGER6_ID,V_TRIPPED); MyMessage msg07(TRIGGER7_ID,V_TRIPPED); MyMessage msg08(TRIGGER8_ID,V_TRIPPED); MyMessage msg09(TRIGGER9_ID,V_TRIPPED); */ // Some Variables /* int oldTrigValue1=-1; int oldTrigValue2=-1; int oldTrigValue3=-1; int oldTrigValue4=-1; int oldTrigValue5=-1; int oldTrigValue6=-1; int oldTrigValue7=-1; int oldTrigValue8=-1; int oldTrigValue9=-1; */ //------------------------------------------------------------------------ // Actuators - Actuators - Actuators - Actuators - Actuators - Actuators //------------------------------------------------------------------------ // DEFINITIONS - LEDs, Relays, ... // Actuators PINS - DIGITAL PIN to Actuator /* #define ACTUATOR1_PIN 3 #define ACTUATOR2_PIN 7 #define ACTUATOR3_PIN 7 #define ACTUATOR4_PIN 7 #define ACTUATOR5_PIN 7 #define ACTUATOR6_PIN 7 #define ACTUATOR7_PIN 7 #define ACTUATOR8_PIN 7 #define ACTUATOR9_PIN 7 */ #define ACTUATOR_ON 1 #define ACTUATOR_OFF 0 bool state; //------------------------------------------------------------------------ // Sensors - Sensors - Sensors - Sensors - Sensors - Sensors - Sensors //------------------------------------------------------------------------ // DEFINITIONS - Temperatur, Humidity, Lightlevel,... // Sensor PINS /* #define SENSOR1_PIN 3 #define SENSOR2_PIN 3 #define SENSOR3_PIN 3 #define SENSOR4_PIN 3 #define SENSOR5_PIN 3 #define SENSOR6_PIN 3 #define SENSOR7_PIN 3 #define SENSOR8_PIN 3 #define SENSOR9_PIN 3 */ // MyMessage V_TEMP, V_LIGHT_LEVEL, ... depending on Sensor Type /* MyMessage msg11(SENSOR1_ID,V_TEMP); MyMessage msg12(SENSOR2_ID,V_TEMP); MyMessage msg13(SENSOR3_ID,V_TEMP); MyMessage msg14(SENSOR4_ID,V_TEMP); MyMessage msg15(SENSOR5_ID,V_TEMP); MyMessage msg16(SENSOR6_ID,V_TEMP); MyMessage msg17(SENSOR7_ID,V_TEMP); MyMessage msg18(SENSOR8_ID,V_TEMP); MyMessage msg19(SENSOR9_ID,V_TEMP); */ // Interval for each Sensor Read (number of loops) 1000000 = ca. 60 Sec - Adruino Nano ATmega 328 /* long int sensorInterval1 = 1000000; long int sensorInterval2 = 1000000; long int sensorInterval3 = 1000000; long int sensorInterval4 = 1000000; long int sensorInterval5 = 1000000; long int sensorInterval6 = 1000000; long int sensorInterval7 = 1000000; long int sensorInterval8 = 1000000; long int sensorInterval9 = 1000000; */ // Special Config for each Sensor // SENSOR 1 // SENSOR 2 // SENSOR 3 // SENSOR 4 // SENSOR 5 // SENSOR 6 // SENSOR 7 // SENSOR 8 // SENSOR 9 //for sending only if value changed float lastRead1; float lastRead2; float lastRead3; float lastRead4; float lastRead5; float lastRead6; float lastRead7; float lastRead8; float lastRead9; //for loops /* long int sI1 = sensorInterval1; long int sI2 = sensorInterval2; long int sI3 = sensorInterval3; long int sI4 = sensorInterval4; long int sI5 = sensorInterval5; long int sI6 = sensorInterval6; long int sI7 = sensorInterval7; long int sI8 = sensorInterval8; long int sI9 = sensorInterval9; */ //------------------------------------------------------------------------ // Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers //------------------------------------------------------------------------ // DEFINITIONS - DIMMERS, ... // Dimmer PINS - DIGITAL PIN to Actuator /* #define DIMMER1_PIN 5 #define DIMMER2_PIN 6 #define DIMMER3_PIN 7 #define DIMMER4_PIN 7 #define DIMMER5_PIN 7 #define DIMMER6_PIN 7 #define DIMMER7_PIN 7 #define DIMMER8_PIN 7 #define DIMMER9_PIN 7 */ //store old lastlevel static int currentLevel = 0; static int lastLevel1 = 0; static int lastLevel2 = 0; static int lastLevel3 = 0; static int lastLevel4 = 0; static int lastLevel5 = 0; static int lastLevel6 = 0; static int lastLevel7 = 0; static int lastLevel8 = 0; static int lastLevel9 = 0; #define FADE_DELAY 10 // Delay in ms for each percentage fade up/down (10ms = 1s full-range dim) //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- // VOID SETUP - VOID SETUP - VOID SETUP - VOID SETUP - VOID SETUP //----------------------------------------------------------------------------------------------------------- void setup() { gw.begin(incomingMessage, NodeID, true); // Send the sketch version information to the gateway and Controller gw.sendSketchInfo("Framework sensor/actuator", "1.0"); //------------------------------------------------------------------------ // Triggers - Triggers - Triggers - Triggers - Triggers - Triggers //------------------------------------------------------------------------ // VOID SETUP /* pinMode(TRIGGER1_PIN,INPUT); pinMode(TRIGGER2_PIN,INPUT); pinMode(TRIGGER3_PIN,INPUT); pinMode(TRIGGER4_PIN,INPUT); pinMode(TRIGGER5_PIN,INPUT); pinMode(TRIGGER6_PIN,INPUT); pinMode(TRIGGER7_PIN,INPUT); pinMode(TRIGGER8_PIN,INPUT); pinMode(TRIGGER9_PIN,INPUT); */ // Activate internal pull-up /* digitalWrite(TRIGGER1_PIN,HIGH); digitalWrite(TRIGGER2_PIN,HIGH); digitalWrite(TRIGGER3_PIN,HIGH); digitalWrite(TRIGGER4_PIN,HIGH); digitalWrite(TRIGGER5_PIN,HIGH); digitalWrite(TRIGGER6_PIN,HIGH); digitalWrite(TRIGGER7_PIN,HIGH); digitalWrite(TRIGGER8_PIN,HIGH); digitalWrite(TRIGGER9_PIN,HIGH); */ // After setting up the button, setup debouncer /* debouncer1.attach(TRIGGER1_PIN); debouncer2.attach(TRIGGER2_PIN); debouncer3.attach(TRIGGER3_PIN); debouncer4.attach(TRIGGER4_PIN); debouncer5.attach(TRIGGER5_PIN); debouncer6.attach(TRIGGER6_PIN); debouncer7.attach(TRIGGER7_PIN); debouncer8.attach(TRIGGER8_PIN); debouncer9.attach(TRIGGER9_PIN); */ /* debouncer1.interval(5); debouncer2.interval(5); debouncer3.interval(5); debouncer4.interval(5); debouncer5.interval(5); debouncer6.interval(5); debouncer7.interval(5); debouncer8.interval(5); debouncer9.interval(5); */ // present all Triggers to the Gateway /* gw.present(TRIGGER1_ID, S_DOOR); gw.present(TRIGGER2_ID, S_DOOR); gw.present(TRIGGER3_ID, S_DOOR); gw.present(TRIGGER4_ID, S_DOOR); gw.present(TRIGGER5_ID, S_DOOR); gw.present(TRIGGER6_ID, S_DOOR); gw.present(TRIGGER7_ID, S_DOOR); gw.present(TRIGGER8_ID, S_DOOR); gw.present(TRIGGER9_ID, S_DOOR); */ //------------------------------------------------------------------------ // Actuators - Actuators - Actuators - Actuators - Actuators - Actuators //------------------------------------------------------------------------ // VOID SETUP /* pinMode(ACTUATOR1_PIN, OUTPUT); pinMode(ACTUATOR2_PIN, OUTPUT); pinMode(ACTUATOR3_PIN, OUTPUT); pinMode(ACTUATOR4_PIN, OUTPUT); pinMode(ACTUATOR5_PIN, OUTPUT); pinMode(ACTUATOR6_PIN, OUTPUT); pinMode(ACTUATOR7_PIN, OUTPUT); pinMode(ACTUATOR8_PIN, OUTPUT); pinMode(ACTUATOR9_PIN, OUTPUT); */ // present all Actuators to the Gateway /* gw.present(ACTUATOR1_ID, S_LIGHT); gw.present(ACTUATOR2_ID, S_LIGHT); gw.present(ACTUATOR3_ID, S_LIGHT); gw.present(ACTUATOR4_ID, S_LIGHT); gw.present(ACTUATOR5_ID, S_LIGHT); gw.present(ACTUATOR6_ID, S_LIGHT); gw.present(ACTUATOR7_ID, S_LIGHT); gw.present(ACTUATOR8_ID, S_LIGHT); gw.present(ACTUATOR9_ID, S_LIGHT); */ // FETCH old State and SET old state /* bool state1 = gw.loadState(ACTUATOR1_ID); digitalWrite(ACTUATOR1_ID, state1?ACTUATOR_ON:ACTUATOR_OFF); bool state2 = gw.loadState(ACTUATOR2_ID); digitalWrite(ACTUATOR2_ID, state2?ACTUATOR_ON:ACTUATOR_OFF); bool state3 = gw.loadState(ACTUATOR3_ID); digitalWrite(ACTUATOR3_ID, state3?ACTUATOR_ON:ACTUATOR_OFF); bool state4 = gw.loadState(ACTUATOR4_ID); digitalWrite(ACTUATOR4_ID, state4?ACTUATOR_ON:ACTUATOR_OFF); bool state5 = gw.loadState(ACTUATOR5_ID); digitalWrite(ACTUATOR5_ID, state5?ACTUATOR_ON:ACTUATOR_OFF); bool state6 = gw.loadState(ACTUATOR6_ID); digitalWrite(ACTUATOR6_ID, state6?ACTUATOR_ON:ACTUATOR_OFF); bool state7 = gw.loadState(ACTUATOR7_ID); digitalWrite(ACTUATOR7_ID, state7?ACTUATOR_ON:ACTUATOR_OFF); bool state8 = gw.loadState(ACTUATOR8_ID); digitalWrite(ACTUATOR8_ID, state8?ACTUATOR_ON:ACTUATOR_OFF); bool state9 = gw.loadState(ACTUATOR9_ID); digitalWrite(ACTUATOR9_ID, state9?ACTUATOR_ON:ACTUATOR_OFF); */ //------------------------------------------------------------------------ // Sensors - Sensors - Sensors - Sensors - Sensors - Sensors - Sensors //------------------------------------------------------------------------ // VOID SETUP // present all Sensors to Gateway - S_TEMP, S_LIGHT_LEVEL,... depending an SENSOR type /* gw.present(SENSOR1_ID, S_TEMP); gw.present(SENSOR2_ID, S_TEMP); gw.present(SENSOR3_ID, S_TEMP); gw.present(SENSOR4_ID, S_TEMP); gw.present(SENSOR5_ID, S_TEMP); gw.present(SENSOR6_ID, S_TEMP); gw.present(SENSOR7_ID, S_TEMP); gw.present(SENSOR8_ID, S_TEMP); gw.present(SENSOR9_ID, S_TEMP); */ // Special SETUP for each Sensor // SENSOR 1 // SENSOR 2 // SENSOR 3 // SENSOR 4 // SENSOR 5 // SENSOR 6 // SENSOR 7 // SENSOR 8 // SENSOR 9 //------------------------------------------------------------------------ // Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers //------------------------------------------------------------------------ // VOID SETUP /* pinMode(DIMMER1_PIN, OUTPUT); pinMode(DIMMER2_PIN, OUTPUT); pinMode(DIMMER3_PIN, OUTPUT); pinMode(DIMMER4_PIN, OUTPUT); pinMode(DIMMER5_PIN, OUTPUT); pinMode(DIMMER6_PIN, OUTPUT); pinMode(DIMMER7_PIN, OUTPUT); pinMode(DIMMER8_PIN, OUTPUT); pinMode(DIMMER9_PIN, OUTPUT); */ // present all dimmers to the Gateway /* gw.present(DIMMER1_ID, S_DIMMER); gw.present(DIMMER2_ID, S_DIMMER); gw.present(DIMMER3_ID, S_DIMMER); gw.present(DIMMER4_ID, S_DIMMER); gw.present(DIMMER5_ID, S_DIMMER); gw.present(DIMMER6_ID, S_DIMMER); gw.present(DIMMER7_ID, S_DIMMER); gw.present(DIMMER8_ID, S_DIMMER); gw.present(DIMMER9_ID, S_DIMMER); */ } //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------------------------- // VOID LOOP - VOID LOOP - VOID LOOP - VOID LOOP - VOID LOOP - VOID LOOP //----------------------------------------------------------------------------------------------------------- // Check if digital input has changed and send in new value void loop() { gw.process(); //------------------------------------------------------------------------ // Triggers - Triggers - Triggers - Triggers - Triggers - Triggers //------------------------------------------------------------------------ // LOOP /* debouncer1.update(); debouncer2.update(); debouncer3.update(); debouncer4.update(); debouncer5.update(); debouncer6.update(); debouncer7.update(); debouncer8.update(); debouncer9.update(); */ // Get the update value /* int value1 = debouncer1.read(); int value2 = debouncer2.read(); int value3 = debouncer3.read(); int value4 = debouncer4.read(); int value5 = debouncer5.read(); int value6 = debouncer6.read(); int value7 = debouncer7.read(); int value8 = debouncer8.read(); int value9 = debouncer9.read(); */ // Send in the new value - if value changed /* if (value1 != oldTrigValue1) { gw.send(msg01.set(value1==LOW ? 1 : 0)); oldTrigValue1 = value1; } if (value2 != oldTrigValue2) { gw.send(msg02.set(value2==LOW ? 1 : 0)); oldTrigValue2 = value2; } if (value3 != oldTrigValue3) { gw.send(msg03.set(value3==LOW ? 1 : 0)); oldTrigValue3 = value3; } if (value4 != oldTrigValue4) { gw.send(msg04.set(value4==LOW ? 1 : 0)); oldTrigValue4 = value4; } if (value5 != oldTrigValue5) { gw.send(msg05.set(value5==LOW ? 1 : 0)); oldTrigValue5 = value5; } if (value6 != oldTrigValue6) { gw.send(msg06.set(value6==LOW ? 1 : 0)); oldTrigValue6 = value6; } if (value7 != oldTrigValue7) { gw.send(msg07.set(value7==LOW ? 1 : 0)); oldTrigValue7 = value7; } if (value8 != oldTrigValue8) { gw.send(msg08.set(value8==LOW ? 1 : 0)); oldTrigValue8 = value8; } if (value9 != oldTrigValue9) { gw.send(msg09.set(value9==LOW ? 1 : 0)); oldTrigValue9 = value9; } */ //------------------------------------------------------------------------ // Sensors - Sensors - Sensors - Sensors - Sensors - Sensors - Sensors //------------------------------------------------------------------------ // LOOP /* // Sensor1 if (sI1 == sensorInterval1){ sI1 = 0; // put here the read sensor function like: // float sensorRead1 = analogRead(SENSOR1_PIN); if (lastRead1 != sensorRead1){ float sensorCalc = (sensorRead1 / 10) - 45.5; gw.send(msg11.set(sensorCalc,1)); lastRead1 = sensorRead1; } } // Sensor2 if (sI2 == sensorInterval2){ sI2 = 0; // put here the read sensor function like: // float sensorRead2 = analogRead(SENSOR2_PIN); if (lastRead2 != sensorRead2){ gw.send(msg12.set(sensorRead2,1)); lastRead2 = sensorRead2; } } // Sensor3 if (sI3 == sensorInterval3){ sI3 = 0; // put here the read sensor function like: // float sensorRead3 = analogRead(SENSOR3_PIN); if (lastRead3 != sensorRead3){ gw.send(msg13.set(sensorRead3,1)); lastRead3 = sensorRead3; } } // Sensor4 if (sI4 == sensorInterval4){ sI4 = 0; // put here the read sensor function like: // float sensorRead4 = analogRead(SENSOR4_PIN); if (lastRead4 != sensorRead4){ gw.send(msg14.set(sensorRead4)); lastRead4 = sensorRead4; } } // Sensor5 // Sensor6 // Sensor7 // Sensor8 // Sensor9 */ /* sI1++; sI2++; sI3++; sI4++; sI5++; sI6++; sI7++; sI8++; sI9++; */ } //------------------------------------------------------------------------ //------------------------------------------------------------------------ //------------------------------------------------------------------------ // VOID INCOMING MESSAGE - VOID INCOMING MESSAGE - VOID INCOMING MESSAGE //------------------------------------------------------------------------ void incomingMessage(const MyMessage &message) { // We only expect one type of message from controller. But we better check anyway. if (message.isAck()) { Serial.println("This is an ack from gateway"); } //------------------------------------------------------------------------ // Actuators - Actuators - Actuators - Actuators - Actuators - Actuators //------------------------------------------------------------------------ // VOID INCOMING MESSAGE if (message.type==V_LIGHT) { int actPin; /* if (message.sensor == 11){ actPin = ACTUATOR1_PIN; } if (message.sensor == 12){ actPin = ACTUATOR2_PIN; } if (message.sensor == 13){ actPin = ACTUATOR3_PIN; } if (message.sensor == 14){ actPin = ACTUATOR4_PIN; } if (message.sensor == 15){ actPin = ACTUATOR5_PIN; } if (message.sensor == 16){ actPin = ACTUATOR6_PIN; } if (message.sensor == 17){ actPin = ACTUATOR7_PIN; } if (message.sensor == 18){ actPin = ACTUATOR8_PIN; } if (message.sensor == 19){ actPin = ACTUATOR9_PIN; } */ //------------------------------------------------------------------------ // switch Actuator //------------------------------------------------------------------------ state = message.getBool(); digitalWrite(actPin, state?ACTUATOR_ON:ACTUATOR_OFF); gw.saveState(message.sensor, state); Serial.println(); Serial.print("Change for sensor:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(message.getBool()); Serial.println(); // set state back to old state gw.loadState(message.sensor); digitalWrite(actPin, state?ACTUATOR_ON:ACTUATOR_OFF); MyMessage msgTmp(message.sensor,V_LIGHT); gw.send(msgTmp.set(state)); } //------------------------------------------------------------------------ // Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - Dimmers - //------------------------------------------------------------------------ if (message.type==V_DIMMER) { int pwmPin; // Retrieve the power or dim level from the incoming request message int requestedLevel = atoi( message.data ); /* if (message.sensor == 31){ pwmPin = DIMMER1_PIN; currentLevel = lastLevel1; lastLevel1 = requestedLevel; } if (message.sensor == 32){ pwmPin = DIMMER2_PIN; currentLevel = lastLevel2; lastLevel2 = requestedLevel; } if (message.sensor == 33){ pwmPin = DIMMER3_PIN; currentLevel = lastLevel3; lastLevel3 = requestedLevel; } if (message.sensor == 34){ pwmPin = DIMMER4_PIN; currentLevel = lastLevel4; lastLevel4 = requestedLevel; } if (message.sensor == 35){ pwmPin = DIMMER5_PIN; currentLevel = lastLevel5; lastLevel5 = requestedLevel; } if (message.sensor == 36){ pwmPin = DIMMER6_PIN; currentLevel = lastLevel6; lastLevel6 = requestedLevel; } if (message.sensor == 37){ pwmPin = DIMMER7_PIN; currentLevel = lastLevel7; lastLevel7 = requestedLevel; } if (message.sensor == 38){ pwmPin = DIMMER8_PIN; currentLevel = lastLevel8; lastLevel8 = requestedLevel; } if (message.sensor == 39){ pwmPin = DIMMER9_PIN; currentLevel = lastLevel9; lastLevel9 = requestedLevel; } */ //------------------------------------------------------------------------ // set Dimmer //------------------------------------------------------------------------ // Clip incoming level to valid range of 0 to 100 requestedLevel = requestedLevel > 100 ? 100 : requestedLevel; requestedLevel = requestedLevel < 0 ? 0 : requestedLevel; Serial.println(); Serial.print( "Changing sensor " ); Serial.println( message.sensor ); Serial.print( "Changing level to " ); Serial.print( requestedLevel ); Serial.print( ", from " ); Serial.println( currentLevel ); Serial.println(); fadeToLevel( requestedLevel, pwmPin ); // Inform the gateway of the current DimmableLED's SwitchPower1 and LoadLevelStatus value... MyMessage lightTmp(message.sensor,V_LIGHT); gw.send(lightTmp.set(currentLevel > 0 ? 1 : 0)); MyMessage msgTmp(message.sensor,V_DIMMER); gw.send(msgTmp.set(currentLevel)); } } /*** * This method provides a graceful fade up/down effect */ void fadeToLevel( int toLevel, int pwmpin ) { int delta = ( toLevel - currentLevel ) < 0 ? -1 : 1; while ( currentLevel != toLevel ) { currentLevel += delta; analogWrite( pwmpin, (int)(currentLevel / 100. * 255) ); delay( FADE_DELAY ); } }```
-
any update? did it evolved? Thx in advance.
2 out of 2
Suggested Topics
-
Welcome
Announcements • 23 Mar 2014, 08:24 • hek 2 Apr 2014, 14:39 -
Auxiliary Loads and Mains Charger Controller for my Smart Mobile Home
My Project • 6 Jan 2024, 13:32 • fsgraz 6 Jan 2024, 13:32 -
A low cost energy meter
My Project • 25 Jan 2024, 01:03 • OldSurferDude 12 Aug 2024, 06:03 -
HVAC Controller
My Project • 21 Sept 2023, 15:29 • Michael Link 5 Dec 2023, 03:15 -
Halloween Lights
My Project • 30 Oct 2023, 02:47 • KevinT 30 Oct 2023, 02:47 -
nRF24Doctor
My Project • 27 Mar 2018, 18:46 • Technovation 25 Aug 2023, 10:53