MySensors V2 - Gateway to Domoticz TSF:CHKUPL:FAIL !TSM:UPL:FAIL
-
But the official version (not BETA) of the Mysensord V2 is not compatible with Domoticz ? (NRF24L01 direct connect to raspberry)
Everything worked perfectly with the V2 beta , once upgraded to the official version does not work anymore .Tnk
TSM:INIT TSM:INIT:TSP OK TSF:ASID:OK,ID=18 TSM:FPAR TSF:MSG:SEND,18-18-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSF:MSG:READ,0-0-18,s=255,c=3,t=8,pt=1,l=1,sg=0:0 TSF:MSG:FPAR RES,ID=0,D=0 TSF:MSG:FPAR OK,ID=0,D=1 TSM:FPAR:OK TSM:ID TSM:ID:OK,ID=18 TSM:UPL TSF:PING:SEND,TO=0 TSF:MSG:SEND,18-18-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 TSF:CHKUPL:FAIL !TSM:UPL:FAIL TSM:FPAR TSF:MSG:SEND,18-18-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:NO REPLY TSM:FPAR TSF:MSG:SEND,18-18-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSF:MSG:READ,0-0-18,s=255,c=3,t=8,pt=1,l=1,sg=0:0 TSF:MSG:FPAR RES,ID=0,D=0 TSF:MSG:FPAR OK,ID=0,D=1 TSM:FPAR:OK TSM:ID TSM:ID:OK,ID=18 TSM:UPL TSF:PING:SEND,TO=0 TSF:MSG:SEND,18-18-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 TSF:CHKUPL:FAIL !TSM:UPL:FAIL TSM:FPAR TSF:MSG:SEND,18-18-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:NO REPLY TSM:FPAR TSF:MSG:SEND,18-18-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSF:MSG:READ,0-0-18,s=255,c=3,t=8,pt=1,l=1,sg=0:0 TSF:MSG:FPAR RES,ID=0,D=0 TSF:MSG:FPAR OK,ID=0,D=1 TSM:FPAR:OK TSM:ID TSM:ID:OK,ID=18 TSM:UPL TSF:PING:SEND,TO=0 TSF:MSG:SEND,18-18-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 TSF:CHKUPL:FAIL !TSM:UPL:FAIL TSM:FPAR```
-
This is output with V2.0.0 Beta
All OK
Starting repeater (RNNRA-, 2.0.0-beta) Radio init successful. Test V_text send: 18-18-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,st=ok:0100 send: 18-18-0-0 s=255,c=0,t=18,pt=0,l=10,sg=0,st=ok:2.0.0-beta send: 18-18-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0 read: 0-0-18 s=255,c=3,t=6,pt=0,l=2,sg=0:M send: 18-18-0-0 s=255,c=3,t=11,pt=0,l=6,sg=0,st=ok:V_TEXT send: 18-18-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:0.1 send: 18-18-0-0 s=2,c=0,t=36,pt=0,l=19,sg=0,st=ok:Lightning Intensity send: 18-18-0-0 s=1,c=0,t=0,pt=0,l=0,sg=0,st=fail: Init complete, id=18, parent=0, distance=1 send: 18-18-0-0 s=2,c=2,t=47,pt=0,l=0,sg=0,st=ok: read: 0-0-18 s=2,c=2,t=47,pt=0,l=11,sg=0:2517.5,827 Incoming change for sensor:2, New status: 1 Nuovo Messaggio ricevuto -> 2517.5,827 Primo Valore -> 2517 Secondo Valore -> 5,827```