Ethernet GW W5100 can not connect to Domoticz

[Marek Běluša]

Hi,

Ethernet GW W5100 buid:

https://www.mysensors.org/build/ethernet_gateway

... when i try to conect to Domoticz then this is result:

Ping to 192.168.1.140 is OK

Thanks for help!

[Boots33]

@Marek-Běluša There were some problems with certain versions of the arduino IDE that caused the gateway to constantly reset. See this post for some more info.

[Marek Běluša]

Thanks, solveded, IDE 1.6.7 OK !