@emc2 Interesting read.
@korttoma I've connected up IRQ line. Still no luck,
@TON-RIJNAARD Have tried that now as well. No luck.
Tried going back to basics and now have 2 x Arduino pros with RFM69 - both loaded with pingpong script.
Don't know where I'm going wrong but I can't even start the script - entering 1 or T does nothing. (I"ve used the script before with the NRF radio and it works)
Have also tried the latest dev version.
Just keep getting this on both arduinos:
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.0.1-beta
4 TSM:INIT
1 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.0.1-beta
5 TSM:INIT
7 TSM:INIT:TSP OK
8 TSM:FPAR
138 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2145 !TSM:FPAR:NO REPLY
2147 TSM:FPAR
2277 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4284 !TSM:FPAR:NO REPLY
4286 TSM:FPAR
4416 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6423 !TSM:FPAR:NO REPLY
6425 TSM:FPAR
6555 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8562 !TSM:FPAR:FAIL
8563 TSM:FAIL:CNT=1
8565 TSM:FAIL:PDT