@exdj21 said in RaspBerry PI3 B + Dragino HAT ( RF95 / RFM95 ) = RF24_NOP error:

RF24_NOP

What is "RF24_NOP" and what is it used for?

I'm trying to use the mysensors library 2.1.1, but it is giving this error:

In file included from ./MySensors.h:304:0,
                 from examples_linux/mysgw.cpp:74:
./drivers/RFM95/RFM95.cpp: In function ‘uint8_t RFM95_spiMultiByteTransfer(uint8_t, uint8_t*, uint8_t, bool)’:
./drivers/RFM95/RFM95.cpp:58:13: error: ‘RF24_NOP’ was not declared in this scope
    *ptx++ = RF24_NOP;
             ^
In file included from ./MySensors.h:304:0,
                 from examples_linux/mysgw.cpp:74:
./drivers/RFM95/RFM95.cpp: At global scope:
./drivers/RFM95/RFM95.cpp:494:12: warning: ‘void RFM95_ATCmode(bool, int16_t)’ defined but not used [-Wunused-function]
 LOCAL void RFM95_ATCmode(const bool OnOff, const int16_t targetRSSI)
            ^
Makefile:114: recipe for target 'build/examples_linux/mysgw.o' failed
make: *** [build/examples_linux/mysgw.o] Error 1

What I am using:

• Raspberry pi3 B
• Linux Raspbian
• Dragino HAT v1.3 ( RF98 - 433Mhz )
• MySensors library 2.1.1

What I have made so far:

pi@pi:~ $ sudo git clone https://github.com/mysensors/MySensors.git --branch master
Cloning into 'MySensors'...
remote: Counting objects: 13994, done.
remote: Compressing objects: 100% (54/54), done.
remote: Total 13994 (delta 13), reused 0 (delta 0), pack-reused 13940
Receiving objects: 100% (13994/13994), 9.71 MiB | 141.00 KiB/s, done.
Resolving deltas: 100% (8441/8441), done.
Checking connectivity... done.
pi@pi:~ $ cd MySensors
pi@pi:~/MySensors $ sudo ./configure --my-gateway=ethernet --my-port=5003 --my-transport=rfm95
[SECTION] Detecting target machine.
  [OK] machine detected: SoC=BCM2836, Type=RPi3, CPU=armv7l.
[SECTION] Detecting SPI driver.
  [OK] SPI driver detected:BCM.
[SECTION] Detecting init system.
  [OK] init system detected: systemd.
[SECTION] Saving configuration.
[SECTION] Cleaning previous builds.
[OK] Finished.
pi@pi:~/MySensors $ sudo make
.
.
.
.
 examples_linux/mysgw.cpp -o build/examples_linux/mysgw.o
In file included from ./MySensors.h:304:0,
                 from examples_linux/mysgw.cpp:74:
./drivers/RFM95/RFM95.cpp: In function ‘uint8_t RFM95_spiMultiByteTransfer(uint8_t, uint8_t*, uint8_t, bool)’:
./drivers/RFM95/RFM95.cpp:58:13: error: ‘RF24_NOP’ was not declared in this scope
    *ptx++ = RF24_NOP;
             ^
In file included from ./MySensors.h:304:0,
                 from examples_linux/mysgw.cpp:74:
./drivers/RFM95/RFM95.cpp: At global scope:
./drivers/RFM95/RFM95.cpp:494:12: warning: ‘void RFM95_ATCmode(bool, int16_t)’ defined but not used [-Wunused-function]
 LOCAL void RFM95_ATCmode(const bool OnOff, const int16_t targetRSSI)
            ^
Makefile:114: recipe for target 'build/examples_linux/mysgw.o' failed
make: *** [build/examples_linux/mysgw.o] Error 1

The RFM95.cpp code part:

#if defined(LINUX_SPI_BCM)
	uint8_t * prx = spi_rxbuff;
	uint8_t * ptx = spi_txbuff;
	uint8_t size = len + 1; // Add register value to transmit buffer

	*ptx++ = cmd;
	while (len--) {
		if (aReadMode) {
			*ptx++ = RF24_NOP;
		} else {
			*ptx++ = *current++;
		}
	}
	_SPI.transfernb((char *)spi_txbuff, (char *)spi_rxbuff, size);
	if (aReadMode) {
		if (size == 2) {
			status = *++prx;   // result is 2nd byte of receive buffer
		} else {
			status = *prx++; // status is 1st byte of receive buffer
			// decrement before to skip status byte
			while (--size) {
				*buf++ = *prx++;
			}
		}
	} else {
		status = *prx; // status is 1st byte of receive buffer
	}
#else
	status = _SPI.transfer(cmd);
	while (len--) {
		if (aReadMode) {
			status = _SPI.transfer((uint8_t)0x00);
			if (buf != NULL) {
				*current++ = status;
			}
		} else {
			status = _SPI.transfer(*current++);
		}
	}
#endif

any idea?