Hi,
I have issue with establish connection between sensor and gw. I used code from examples plus below definition to enable full log. Both sensor and gw are build on arduino nano (but I also tried uno) and I use 10uF capacitor for both.
Bellow I attached log from gw and sensor. I assuming that problem is with sensor, but not 100% sure
Any suggestion welcome what I can or what I've doing wrong.
#define MY_DEBUG
#define MY_DEBUG_VERBOSE_RF24
#define MY_RADIO_NRF24
#define MY_NODE_ID 1
#define MY_RF24_PA_LEVEL RF24_PA_LOW
#define MY_RF24_DATARATE RF24_1MBPS
So this is log from gw.
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;RF24:write register, reg=0, value=14
0;255;3;0;9;RF24:write register, reg=3, value=3
0;255;3;0;9;RF24:write register, reg=4, value=95
0;255;3;0;9;RF24:write register, reg=5, value=76
0;255;3;0;9;RF24:write register, reg=6, value=35
0;255;3;0;9;RF24:read register, reg=6, value=35
0;255;3;0;9;RF24:read register, reg=5, value=76
0;255;3;0;9;RF24:write register, reg=16, value=115
0;255;3;0;9;RF24:write register, reg=29, value=6
0;255;3;0;9;RF24:write register, reg=2, value=2
0;255;3;0;9;RF24:write register, reg=1, value=0
0;255;3;0;9;RF24:write register, reg=28, value=3
0;255;3;0;9;RF24:flushRX
0;255;3;0;9;RF24:flushTX
0;255;3;0;9;RF24:write register, reg=7, value=112
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;RF24:write register, reg=2, value=3
0;255;3;0;9;RF24:write register, reg=1, value=1
0;255;3;0;9;RF24:start listening
0;255;3;0;9;RF24:write register, reg=0, value=15
0;255;3;0;9;RF24:write register, reg=10, value=0
0;255;3;0;9;TSM:READY
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.0.0
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
0;255;3;0;9;RF24:read register, reg=6, value=35
0;255;3;0;9;RF24:read register, reg=5, value=76
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;RF24:read register, reg=6, value=35
0;255;3;0;9;RF24:read register, reg=5, value=76
0;255;3;0;9;TSP:SANCHK:OK
and from sensor
Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
RF24:write register, reg=0, value=14
RF24:write register, reg=3, value=3
RF24:write register, reg=4, value=95
RF24:write register, reg=5, value=76
RF24:write register, reg=6, value=3
RF24:read register, reg=6, value=3
RF24:read register, reg=5, value=76
RF24:write register, reg=16, value=115
RF24:write register, reg=29, value=6
RF24:write register, reg=2, value=2
RF24:write register, reg=1, value=0
RF24:write register, reg=28, value=3
RF24:flushRX
RF24:flushTX
RF24:write register, reg=7, value=112
TSM:RADIO:OK
RF24:write register, reg=2, value=3
RF24:write register, reg=1, value=1
RF24:start listening
RF24:write register, reg=0, value=15
RF24:write register, reg=10, value=1
TSP:ASSIGNID:OK (ID=1)
TSM:FPAR
RF24:stop listening
RF24:write register, reg=0, value=14
RF24:open writing pipe, recipient=255
RF24:write register, reg=10, value=255
RF24:write register, reg=16, value=255
RF24:send message to 255, len=7
RF24:flushTX
RF24:write register, reg=7, value=48
RF24:MAX_RT
RF24:flushTX
RF24:start listening
RF24:write register, reg=0, value=15
RF24:write register, reg=10, value=1
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
RF24:stop listening
RF24:write register, reg=0, value=14
RF24:open writing pipe, recipient=255
RF24:write register, reg=10, value=255
RF24:write register, reg=16, value=255
RF24:send message to 255, len=7
RF24:flushTX
RF24:write register, reg=7, value=48
RF24:MAX_RT
RF24:flushTX
RF24:start listening
RF24:write register, reg=0, value=15
RF24:write register, reg=10, value=1
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
RF24:stop listening
RF24:write register, reg=0, value=14
RF24:open writing pipe, recipient=255
RF24:write register, reg=10, value=255
RF24:write register, reg=16, value=255
RF24:send message to 255, len=7
RF24:flushTX
RF24:write register, reg=7, value=48
RF24:MAX_RT
RF24:flushTX
RF24:start listening
RF24:write register, reg=0, value=15
RF24:write register, reg=10, value=1
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSM:FPAR
RF24:stop listening
RF24:write register, reg=0, value=14
RF24:open writing pipe, recipient=255
RF24:write register, reg=10, value=255
RF24:write register, reg=16, value=255
RF24:send message to 255, len=7
RF24:flushTX
RF24:write register, reg=7, value=48
RF24:MAX_RT
RF24:flushTX
RF24:start listening
RF24:write register, reg=0, value=15
RF24:write register, reg=10, value=1
TSP:MSG:SEND 1-1-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
!TSM:FPAR:FAIL
!TSM:FAILURE
TSM:PDT
RF24:write register, reg=0, value=12
RF24:power down
