@guillermo-schimmel updating how to use the OpenHab 2.4 MQTT would be wonderful. Just updated OpenHab, and the new MQTT broke everything I had setup. I'm sure there is a step I missed, but the new bindings and embedded broker and MQTT Things has be wondering if there is an easier controller to use.
leitefrog
@leitefrog
Best posts made by leitefrog
Latest posts made by leitefrog
-
RE: 💬 OpenHAB
-
RE: Rpi3 GW, Nano, NRF24L01+ not connecting.
Thanks again for the help. I went to get the gateway log as you questioned, and noticed that the MQTT was dropping and reconnecting pretty regularly, just as I would see messages coming across. I decided to try using the Ethernet Gateway, so I recompiled, and reinstalled. With that I got things to start working. I have a relay turning on and off from the OpenHab UI. Very cool. Now I'm trying to figure out how to use a two channel relay, but I'll start to search for that.
This is a very helpful forum, and again thanks. I really like the log parser too.
-George -
RE: Rpi3 GW, Nano, NRF24L01+ not connecting.
Thanks for the heads up.
I rebooted everything to get a clean log. It acted a bit different.
Here is the sensor log.0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1 3 MCO:BGN:BFR b4 5 TSM:INIT 6 TSF:WUR:MS=0 13 TSM:INIT:TSP OK 14 TSM:INIT:STATID=13 16 TSF:SID:OK,ID=13 18 TSM:FPAR 55 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 435 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 440 TSF:MSG:BC 2062 !TSM:FPAR:NO REPLY 2064 TSM:FPAR 2100 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2483 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 2488 TSF:MSG:BC 4108 !TSM:FPAR:NO REPLY 4110 TSM:FPAR 4146 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 4533 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 4538 TSF:MSG:BC 6154 !TSM:FPAR:NO REPLY 6156 TSM:FPAR 6192 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 8200 !TSM:FPAR:FAIL 8201 TSM:FAIL:CNT=1 8203 TSM:FAIL:PDT 18206 TSM:FAIL:RE-INIT 18208 TSM:INIT 18215 TSM:INIT:TSP OK 18217 TSM:INIT:STATID=13 18220 TSF:SID:OK,ID=13 18222 TSM:FPAR 18258 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 18647 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 18652 TSF:MSG:BC 20267 !TSM:FPAR:NO REPLY 20269 TSM:FPAR 20305 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 20694 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 20699 TSF:MSG:BC 22313 !TSM:FPAR:NO REPLY 22316 TSM:FPAR 22352 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 22740 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 22746 TSF:MSG:BC 24360 !TSM:FPAR:NO REPLY 24363 TSM:FPAR 24399 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 26407 !TSM:FPAR:FAIL 26408 TSM:FAIL:CNT=2 26411 TSM:FAIL:PDT 36414 TSM:FAIL:RE-INIT 36416 TSM:INIT 36423 TSM:INIT:TSP OK 36425 TSM:INIT:STATID=13 36427 TSF:SID:OK,ID=13 36429 TSM:FPAR 36466 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 36578 TSF:MSG:READ,0-0-13,s=255,c=3,t=8,pt=1,l=1,sg=0:0 36583 TSF:MSG:FPAR OK,ID=0,D=1 36854 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 36859 TSF:MSG:BC 38473 TSM:FPAR:OK 38474 TSM:ID 38476 TSM:ID:OK 38477 TSM:UPL 38514 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1 38901 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 38906 TSF:MSG:BC 40522 TSM:UPL 40559 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=1,st=NACK:1 40948 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 40953 TSF:MSG:BC 42566 TSM:UPL 42603 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=2,st=NACK:1 44610 TSM:UPL 44647 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=3,st=NACK:1 46654 !TSM:UPL:FAIL 46655 TSM:FPAR 46692 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=4,st=OK: 48700 !TSM:FPAR:NO REPLY 48702 TSM:FPAR 48739 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 50746 !TSM:FPAR:NO REPLY 50748 TSM:FPAR 50785 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 52792 !TSM:FPAR:NO REPLY 52794 TSM:FPAR 52831 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 53015 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 53021 TSF:MSG:BC 54838 !TSM:FPAR:FAIL 54839 TSM:FAIL:CNT=3 54841 TSM:FAIL:PDT 64844 TSM:FAIL:RE-INIT 64846 TSM:INIT 64854 TSM:INIT:TSP OK 64856 TSM:INIT:STATID=13 64858 TSF:SID:OK,ID=13 64860 TSM:FPAR 64897 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 66904 !TSM:FPAR:NO REPLY 66906 TSM:FPAR 66942 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 68950 !TSM:FPAR:NO REPLY 68952 TSM:FPAR 68988 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 70996 !TSM:FPAR:NO REPLY 70999 TSM:FPAR 71035 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 73043 !TSM:FPAR:FAIL 73044 TSM:FAIL:CNT=4 73047 TSM:FAIL:PDT 83050 TSM:FAIL:RE-INIT 83052 TSM:INIT 83059 TSM:INIT:TSP OK 83061 TSM:INIT:STATID=13 83063 TSF:SID:OK,ID=13 83065 TSM:FPAR 83102 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 85109 !TSM:FPAR:NO REPLY 85111 TSM:FPAR 85148 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 85756 TSF:MSG:READ,0-0-13,s=255,c=3,t=8,pt=1,l=1,sg=0:0 85762 TSF:MSG:FPAR OK,ID=0,D=1 87155 TSM:FPAR:OK 87156 TSM:ID 87158 TSM:ID:OK 87159 TSM:UPL 87196 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1 87203 TSF:MSG:READ,0-0-13,s=255,c=3,t=25,pt=1,l=1,sg=0:1 87208 TSF:MSG:PONG RECV,HP=1 87212 TSM:UPL:OK 87213 TSM:READY:ID=13,PAR=0,DIS=1 87252 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=NACK:0100 89296 !TSF:MSG:SEND,13-13-0-0,s=255,c=0,t=18,pt=0,l=5,sg=0,ft=1,st=NACK:2.1.1 89339 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=2,st=NACK:0 91384 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=11,pt=0,l=5,sg=0,ft=3,st=NACK:Relay 91428 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=4,st=NACK:1.0 91470 !TSF:MSG:SEND,13-13-0-0,s=1,c=0,t=3,pt=0,l=0,sg=0,ft=5,st=NACK: 91512 !TSF:MSG:SEND,13-13-0-0,s=2,c=0,t=3,pt=0,l=0,sg=0,ft=6,st=NACK: 91518 MCO:REG:REQ 91556 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=7,st=NACK:2 93529 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 93534 TSF:MSG:BC 93535 TSF:MSG:FPAR REQ,ID=81 93538 TSF:CKU:OK,FCTRL 93540 TSF:MSG:GWL OK 93901 TSF:MSG:SEND,13-13-81-81,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=8,st=OK:1 93944 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=8,st=NACK:2 95579 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1 95584 TSF:MSG:REL MSG 95587 TSF:MSG:REL PxNG,HP=1 95625 !TSF:MSG:SEND,81-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=9,st=NACK:2 95985 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=10,st=NACK:2 95992 !TSM:READY:UPL FAIL,SNP 95995 TSM:FPAR 96032 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=11,st=OK: 97590 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1 97992 !TSF:SND:TNR 98039 !TSM:FPAR:NO REPLY 98041 TSM:FPAR 98078 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 99624 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1 101636 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1 101994 !TSM:FPAR:NO REPLY 101996 TSM:FPAR 102033 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 103650 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 103655 TSF:MSG:BC 104040 !TSM:FPAR:NO REPLY 104042 TSM:FPAR 104079 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 105694 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 105699 TSF:MSG:BC 106086 !TSM:FPAR:FAIL 106088 TSM:FAIL:CNT=1 106090 TSM:FAIL:PDT 116093 TSM:FAIL:RE-INIT 116096 TSM:INIT 116103 TSM:INIT:TSP OK 116105 TSM:INIT:STATID=13 116107 TSF:SID:OK,ID=13 116110 TSM:FPAR 116147 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 118154 !TSM:FPAR:NO REPLY 118156 TSM:FPAR 118193 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 120200 !TSM:FPAR:NO REPLY 120202 TSM:FPAR 120239 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 121858 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 121864 TSF:MSG:BC 122246 !TSM:FPAR:NO REPLY 122248 TSM:FPAR 122285 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 123907 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 123912 TSF:MSG:BC 124292 !TSM:FPAR:FAIL 124294 TSM:FAIL:CNT=2 124296 TSM:FAIL:PDT 134299 TSM:FAIL:RE-INIT 134301 TSM:INIT 134308 TSM:INIT:TSP OK 134310 TSM:INIT:STATID=13 134312 TSF:SID:OK,ID=13 134316 TSM:FPAR 134352 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 136360 !TSM:FPAR:NO REPLY 136363 TSM:FPAR 136399 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 138407 !TSM:FPAR:NO REPLY 138409 TSM:FPAR 138446 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 140453 !TSM:FPAR:NO REPLY 140455 TSM:FPAR 140492 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 142499 !TSM:FPAR:FAIL 142501 TSM:FAIL:CNT=3 142503 TSM:FAIL:PDT
The sketch I took from the examples in the library.
/** * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2015 Sensnology AB * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * Version 1.0 - Henrik Ekblad * * DESCRIPTION * Example sketch showing how to control physical relays. * This example will remember relay state after power failure. * http://www.mysensors.org/build/relay */ // Enable debug prints to serial monitor #define MY_DEBUG #define MY_NODE_ID 81 // Enable and select radio type attached #define MY_RADIO_NRF24 //#define MY_RADIO_RFM69 // Enable repeater functionality for this node #define MY_REPEATER_FEATURE #include <MySensors.h> #define RELAY_1 3 // Arduino Digital I/O pin number for first relay (second on pin+1 etc) #define NUMBER_OF_RELAYS 2 // Total number of attached relays #define RELAY_ON 1 // GPIO value to write to turn on attached relay #define RELAY_OFF 0 // GPIO value to write to turn off attached relay void before() { for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) { // Then set relay pins in output mode pinMode(pin, OUTPUT); } } void setup() { } void presentation() { // Send the sketch version information to the gateway and Controller sendSketchInfo("Relay", "1.0"); for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) { // Register all sensors to gw (they will be created as child devices) present(sensor, S_BINARY); } } void loop() { } void receive(const MyMessage &message) { // We only expect one type of message from controller. But we better check anyway. if (message.type==V_STATUS) { // Change relay state digitalWrite(message.sensor-1+RELAY_1, message.getBool()?RELAY_ON:RELAY_OFF); // Store state in eeprom saveState(message.sensor, message.getBool()); // Write some debug info Serial.print("Incoming change for sensor:"); Serial.print(message.sensor); Serial.print(", New status: "); Serial.println(message.getBool()); } }
-
RE: Rpi3 GW, Nano, NRF24L01+ not connecting.
@leitefrog quick addition, if I add two sensors (#13 and #81), they appear to see each other. The serial monitor shows
-
Rpi3 GW, Nano, NRF24L01+ not connecting.
Hi everyone,
I am setting up my first sensor network. I have a Raspi 3 running OH2 and MQTT gateway. That part went well. I can subscribe to mqtt messages, and see the gateway come on line and connect. So far so good. I am trying to create a simple relay actuator sensor. I wired some NRF24L01+ radios to a couple of Arduino Nanos. But with each nano I see the following
and the gateway shows
I measured the power, 3.3v to the radios. I've tried changing power sources, but it's the same. The gateway and the sensors are sitting on the same bench a foot away from each other.
Can anyone suggest what to try next?