@guillermo-schimmel updating how to use the OpenHab 2.4 MQTT would be wonderful. Just updated OpenHab, and the new MQTT broke everything I had setup. I'm sure there is a step I missed, but the new bindings and embedded broker and MQTT Things has be wondering if there is an easier controller to use.
Thanks again for the help. I went to get the gateway log as you questioned, and noticed that the MQTT was dropping and reconnecting pretty regularly, just as I would see messages coming across. I decided to try using the Ethernet Gateway, so I recompiled, and reinstalled. With that I got things to start working. I have a relay turning on and off from the OpenHab UI. Very cool. Now I'm trying to figure out how to use a two channel relay, but I'll start to search for that.
This is a very helpful forum, and again thanks. I really like the log parser too.
-George
Thanks for the heads up.
I rebooted everything to get a clean log. It acted a bit different.
Here is the sensor log.
0 MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.1.1
3 MCO:BGN:BFR
b4 5 TSM:INIT
6 TSF:WUR:MS=0
13 TSM:INIT:TSP OK
14 TSM:INIT:STATID=13
16 TSF:SID:OK,ID=13
18 TSM:FPAR
55 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
435 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
440 TSF:MSG:BC
2062 !TSM:FPAR:NO REPLY
2064 TSM:FPAR
2100 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2483 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
2488 TSF:MSG:BC
4108 !TSM:FPAR:NO REPLY
4110 TSM:FPAR
4146 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4533 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
4538 TSF:MSG:BC
6154 !TSM:FPAR:NO REPLY
6156 TSM:FPAR
6192 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8200 !TSM:FPAR:FAIL
8201 TSM:FAIL:CNT=1
8203 TSM:FAIL:PDT
18206 TSM:FAIL:RE-INIT
18208 TSM:INIT
18215 TSM:INIT:TSP OK
18217 TSM:INIT:STATID=13
18220 TSF:SID:OK,ID=13
18222 TSM:FPAR
18258 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
18647 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
18652 TSF:MSG:BC
20267 !TSM:FPAR:NO REPLY
20269 TSM:FPAR
20305 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20694 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
20699 TSF:MSG:BC
22313 !TSM:FPAR:NO REPLY
22316 TSM:FPAR
22352 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22740 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
22746 TSF:MSG:BC
24360 !TSM:FPAR:NO REPLY
24363 TSM:FPAR
24399 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26407 !TSM:FPAR:FAIL
26408 TSM:FAIL:CNT=2
26411 TSM:FAIL:PDT
36414 TSM:FAIL:RE-INIT
36416 TSM:INIT
36423 TSM:INIT:TSP OK
36425 TSM:INIT:STATID=13
36427 TSF:SID:OK,ID=13
36429 TSM:FPAR
36466 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
36578 TSF:MSG:READ,0-0-13,s=255,c=3,t=8,pt=1,l=1,sg=0:0
36583 TSF:MSG:FPAR OK,ID=0,D=1
36854 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
36859 TSF:MSG:BC
38473 TSM:FPAR:OK
38474 TSM:ID
38476 TSM:ID:OK
38477 TSM:UPL
38514 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1
38901 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
38906 TSF:MSG:BC
40522 TSM:UPL
40559 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=1,st=NACK:1
40948 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
40953 TSF:MSG:BC
42566 TSM:UPL
42603 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=2,st=NACK:1
44610 TSM:UPL
44647 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=3,st=NACK:1
46654 !TSM:UPL:FAIL
46655 TSM:FPAR
46692 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=4,st=OK:
48700 !TSM:FPAR:NO REPLY
48702 TSM:FPAR
48739 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
50746 !TSM:FPAR:NO REPLY
50748 TSM:FPAR
50785 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
52792 !TSM:FPAR:NO REPLY
52794 TSM:FPAR
52831 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
53015 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
53021 TSF:MSG:BC
54838 !TSM:FPAR:FAIL
54839 TSM:FAIL:CNT=3
54841 TSM:FAIL:PDT
64844 TSM:FAIL:RE-INIT
64846 TSM:INIT
64854 TSM:INIT:TSP OK
64856 TSM:INIT:STATID=13
64858 TSF:SID:OK,ID=13
64860 TSM:FPAR
64897 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
66904 !TSM:FPAR:NO REPLY
66906 TSM:FPAR
66942 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
68950 !TSM:FPAR:NO REPLY
68952 TSM:FPAR
68988 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
70996 !TSM:FPAR:NO REPLY
70999 TSM:FPAR
71035 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
73043 !TSM:FPAR:FAIL
73044 TSM:FAIL:CNT=4
73047 TSM:FAIL:PDT
83050 TSM:FAIL:RE-INIT
83052 TSM:INIT
83059 TSM:INIT:TSP OK
83061 TSM:INIT:STATID=13
83063 TSF:SID:OK,ID=13
83065 TSM:FPAR
83102 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
85109 !TSM:FPAR:NO REPLY
85111 TSM:FPAR
85148 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
85756 TSF:MSG:READ,0-0-13,s=255,c=3,t=8,pt=1,l=1,sg=0:0
85762 TSF:MSG:FPAR OK,ID=0,D=1
87155 TSM:FPAR:OK
87156 TSM:ID
87158 TSM:ID:OK
87159 TSM:UPL
87196 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=NACK:1
87203 TSF:MSG:READ,0-0-13,s=255,c=3,t=25,pt=1,l=1,sg=0:1
87208 TSF:MSG:PONG RECV,HP=1
87212 TSM:UPL:OK
87213 TSM:READY:ID=13,PAR=0,DIS=1
87252 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=NACK:0100
89296 !TSF:MSG:SEND,13-13-0-0,s=255,c=0,t=18,pt=0,l=5,sg=0,ft=1,st=NACK:2.1.1
89339 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=2,st=NACK:0
91384 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=11,pt=0,l=5,sg=0,ft=3,st=NACK:Relay
91428 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=4,st=NACK:1.0
91470 !TSF:MSG:SEND,13-13-0-0,s=1,c=0,t=3,pt=0,l=0,sg=0,ft=5,st=NACK:
91512 !TSF:MSG:SEND,13-13-0-0,s=2,c=0,t=3,pt=0,l=0,sg=0,ft=6,st=NACK:
91518 MCO:REG:REQ
91556 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=7,st=NACK:2
93529 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
93534 TSF:MSG:BC
93535 TSF:MSG:FPAR REQ,ID=81
93538 TSF:CKU:OK,FCTRL
93540 TSF:MSG:GWL OK
93901 TSF:MSG:SEND,13-13-81-81,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=8,st=OK:1
93944 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=8,st=NACK:2
95579 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
95584 TSF:MSG:REL MSG
95587 TSF:MSG:REL PxNG,HP=1
95625 !TSF:MSG:SEND,81-13-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=9,st=NACK:2
95985 !TSF:MSG:SEND,13-13-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=10,st=NACK:2
95992 !TSM:READY:UPL FAIL,SNP
95995 TSM:FPAR
96032 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=11,st=OK:
97590 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
97992 !TSF:SND:TNR
98039 !TSM:FPAR:NO REPLY
98041 TSM:FPAR
98078 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
99624 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
101636 TSF:MSG:READ,81-81-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
101994 !TSM:FPAR:NO REPLY
101996 TSM:FPAR
102033 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
103650 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
103655 TSF:MSG:BC
104040 !TSM:FPAR:NO REPLY
104042 TSM:FPAR
104079 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
105694 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
105699 TSF:MSG:BC
106086 !TSM:FPAR:FAIL
106088 TSM:FAIL:CNT=1
106090 TSM:FAIL:PDT
116093 TSM:FAIL:RE-INIT
116096 TSM:INIT
116103 TSM:INIT:TSP OK
116105 TSM:INIT:STATID=13
116107 TSF:SID:OK,ID=13
116110 TSM:FPAR
116147 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
118154 !TSM:FPAR:NO REPLY
118156 TSM:FPAR
118193 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
120200 !TSM:FPAR:NO REPLY
120202 TSM:FPAR
120239 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
121858 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
121864 TSF:MSG:BC
122246 !TSM:FPAR:NO REPLY
122248 TSM:FPAR
122285 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
123907 TSF:MSG:READ,81-81-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
123912 TSF:MSG:BC
124292 !TSM:FPAR:FAIL
124294 TSM:FAIL:CNT=2
124296 TSM:FAIL:PDT
134299 TSM:FAIL:RE-INIT
134301 TSM:INIT
134308 TSM:INIT:TSP OK
134310 TSM:INIT:STATID=13
134312 TSF:SID:OK,ID=13
134316 TSM:FPAR
134352 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
136360 !TSM:FPAR:NO REPLY
136363 TSM:FPAR
136399 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
138407 !TSM:FPAR:NO REPLY
138409 TSM:FPAR
138446 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
140453 !TSM:FPAR:NO REPLY
140455 TSM:FPAR
140492 TSF:MSG:SEND,13-13-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
142499 !TSM:FPAR:FAIL
142501 TSM:FAIL:CNT=3
142503 TSM:FAIL:PDT
The sketch I took from the examples in the library.
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* REVISION HISTORY
* Version 1.0 - Henrik Ekblad
*
* DESCRIPTION
* Example sketch showing how to control physical relays.
* This example will remember relay state after power failure.
* http://www.mysensors.org/build/relay
*/
// Enable debug prints to serial monitor
#define MY_DEBUG
#define MY_NODE_ID 81
// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69
// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE
#include <MySensors.h>
#define RELAY_1 3 // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
#define NUMBER_OF_RELAYS 2 // Total number of attached relays
#define RELAY_ON 1 // GPIO value to write to turn on attached relay
#define RELAY_OFF 0 // GPIO value to write to turn off attached relay
void before()
{
for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
// Then set relay pins in output mode
pinMode(pin, OUTPUT);
}
}
void setup()
{
}
void presentation()
{
// Send the sketch version information to the gateway and Controller
sendSketchInfo("Relay", "1.0");
for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
// Register all sensors to gw (they will be created as child devices)
present(sensor, S_BINARY);
}
}
void loop()
{
}
void receive(const MyMessage &message)
{
// We only expect one type of message from controller. But we better check anyway.
if (message.type==V_STATUS) {
// Change relay state
digitalWrite(message.sensor-1+RELAY_1, message.getBool()?RELAY_ON:RELAY_OFF);
// Store state in eeprom
saveState(message.sensor, message.getBool());
// Write some debug info
Serial.print("Incoming change for sensor:");
Serial.print(message.sensor);
Serial.print(", New status: ");
Serial.println(message.getBool());
}
}
@leitefrog quick addition, if I add two sensors (#13 and #81), they appear to see each other. The serial monitor shows
Hi everyone,
I am setting up my first sensor network. I have a Raspi 3 running OH2 and MQTT gateway. That part went well. I can subscribe to mqtt messages, and see the gateway come on line and connect. So far so good. I am trying to create a simple relay actuator sensor. I wired some NRF24L01+ radios to a couple of Arduino Nanos. But with each nano I see the following 
and the gateway shows
I measured the power, 3.3v to the radios. I've tried changing power sources, but it's the same. The gateway and the sensors are sitting on the same bench a foot away from each other.
Can anyone suggest what to try next?