Hi all,

As you requested, if someone want to check the board, i have adapted it for LINOVO 2 gangs 1 way EU format.

You can find the files her https://github.com/tonnerre33/Linovo_EU_2Gang_1way/tree/develop/

Hi,

Did you check the SOFT_HMAC_KEY in your gateway with the skecth SecurityPersonalizer.ino ?
He must be the same at the HMAC node.

Hi,
I desoldered it for increase the battery life I did the same for the regulator.
You can find more informations here : https://www.mysensors.org/build/battery
Thx for your interest

I have just posted the pictures of the v1.1 version. Have fun.

A fast extraction without traitment if that can help

Ok try to remove the jumper between V+ and AREF

@scalz Ok, so i will connect the ant pin and change the config

Thank you for your help Scalz

It's ok, i haven't seen the fuse in the primary of the hilink
with this fuse, the protection is guaranteed, then you don't need termofuse in this project
thanx for answer how you made your choice and i hope the release will arrive soon

Hello,

It seems to me that this function is only in the developed branch with the parameter

MY_TRANSPORT_WAIT_READY_MS

More information at https://github.com/mysensors/MySensors/search?utf8=✓&q=MY_TRANSPORT_WAIT_READY_MS&type=Code

@tlustoch You need to enable MY_OTA_FIRMWARE_FEATURE only if you use DualOptiBoot.
With MYSBootloader, you don't need

I use MYSBootloader 1.3 pre-release with mysensors 2.0. You can find it here : https://forum.mysensors.org/topic/3453/mysbootloader-1-3-pre-release-myscontroller-1-0-0beta

And yes it usable with 8 MHZ internal clock config if you burn the bootloader with 8Mhz internal clock setting.

@Daniel-Oliveira

I think it's DipTrace

@schif
Hello,
Thanx for you comment. Yes you can use it but use a ceramic capacitor

@rzylius https://forum.mysensors.org/topic/3671/ac-dc-double-solid-state-relay-module/197

@grumpf Hello,
if i remember well, we can't anymore change the state of the output in the setup function.
Try to do this in the presentation function

@gohan said in Battery Powered Sensors:
Hello, i didn't know why you add 4 measures (batarray) and you divide by 3 the sum .

@grumpf said in Soil Moisture Sensor Pro Mini:
Thank you Grumpf
For ended well this project i would like to make a beautifull enclosure. But i haven't yet a 3D printer for do it.
Maybe in the end of 2018 cause i have many projects before.
If you haven't an enclosure i advise you to put a wire between the probe and the node because when you will water the plant, the batteries can be drowned.

@dbemowsk said in Soil Moisture Sensor SMD:

I would say that that argument heavily sways the decision away from integrating the sensor.

Yes or we need to change the kind of the probe. I already saw a project with a probe without contact between the copper and the earth. I think this kind of probe reduces or removes the problem of the corrosion but i don't know how to make it.
We can find an example here : https://wemakethings.net/chirp/

But at the time when I have watched, the price of the pcb like this was very expensive. Maybe i can take a look now cause prices of pcb have decreased on pcbway

@dbemowsk Thx for your comment.
I had thought about it too but i think is more expensive to buy a bigger pcb than a separate probe.
And one more thing, with the corrosion i think we have to change the probe after few years. So if we have to change it, it's better to have one distinct.

Sorry for the off-topic, but your site is beautifull

I have finished this project
I haven't tested the last version for a long time but the previous version are always working fine.
If you have any request, tell me and if someone can make a beautifull enclosure, that's will be awesome.
I haven't yet a 3D printer but i hope i'll have it one day .

Congratulations to all participants

@Nca78 said in Livolo 3 buttons US/AU switch adapter:
It's true. Can you take a picture of you pic mcu main board ? It's for compare with my EU board