Posts made by Wes Gurney

I have been trying to get the LinkSprite Lora Radio shield with Arduino Uno to work with MySensors with no success.

Here is a link to the specific shield I am trying to get working with MySensors:
http://linksprite.com/wiki/index.php5?title=Lora_Radio_Shield

I have downloaded the latest development branch from Github (2.2-beta) and have configured a Passive Node and GatewaySerial as below.

Here is my Gateway Serial configuration:

#define MY_DEBUG

// Enable and select radio type attached
#define MY_RADIO_RFM95
#define MY_DEBUG_VERBOSE_RFM95

Here is my Passive Node configuration:

// Enable debug prints
#define MY_DEBUG

// Enable passive mode
#define MY_PASSIVE_NODE

// Passive mode requires static node ID
#define MY_NODE_ID 100

// Enable and select radio type attached
#define MY_RADIO_RFM95
#define MY_DEBUG_VERBOSE_RFM95

#include <MySensors.h>

#define CHILD_ID 0   // Id of the sensor child

// Initialize general message
MyMessage msg(CHILD_ID, V_TEMP);

void setup()
{
}

void presentation()
{
	// Send the sketch version information to the gateway and controller
	sendSketchInfo("Passive node", "1.0");

	// Register all sensors to gw (they will be created as child devices)
	present(CHILD_ID, S_TEMP);
}

void loop()
{
	// generate some random data
	send(msg.set(25.0+random(0,30)/10.0,2));
	sleep(2000);
}

I see the gateway and passive node each start up and init ok. The passive node send messages every 2 seconds however I never see any messages come through to the gateway.

One other note, I have been able to successfully get these LoRaSender and LoRaReceiver examples below to successfully send messages to each other, but they are using a different set of libraries.

The link to these examples is here:
LoRaSender - https://github.com/sandeepmistry/arduino-LoRa/blob/master/examples/LoRaSender/LoRaSender.ino
LoRaReceiver - https://github.com/sandeepmistry/arduino-LoRa/blob/master/examples/LoRaReceiver/LoRaReceiver.ino

Anyone else out there got the LinkSprite LoraShield working with MySensors or any pointers to help me get past this would be much appreciated.

Thanks,
Wes