Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

💬 Detecting Mains Voltage Module

openhardware.io last edited by

https://www.openhardware.io/view/8274/Detecting-Mains-Voltage-Module
Reply Quote 0
1 Reply Last reply

1
Posts

27
Views

Suggested Topics

💬 MyPulse Sensor
OpenHardware.io • sensor pulse counter • • openhardware.io

7

0
Votes

7
Posts

1940
Views

@scalz I guess you have the answer to that question?
In line humidity sensor
Hardware • sensor humidity • • dsabol

1

0
Votes

1
Posts

260
Views

No one has replied
Current Monitoring - How?
Hardware • arduino sensor sketch current • • Dean

8

0
Votes

8
Posts

4928
Views

Any updates on how this turned out?
💬 Soil-moisture-meter
OpenHardware.io • sensor soil moisture meter • • openhardware.io

6

0
Votes

6
Posts

1166
Views

@Serg2055 as the name says, openhardware.io is for open hardware. You are allowed to sell PCB units, partially or fully soldered boards, but selling source is not an acceptable option. Please include readable schematic and source of your boards or at least gerbers or bom. For all your boards posted on openhardware.io. Thank you !
💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

11

1
Votes

11
Posts

2954
Views

@MikeSalmida, No GPS sensor device definition exists for Vera. If you're up to it, create one and add it to the Vera plugin repository.
💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

6

0
Votes

6
Posts

1185
Views

Advantage of this sensor is fast and easy installing by the non qualified personal. The sensor is designed for large agriculture facility with many greenhouses where is needed to be controlled temperature and humidity, the atmospheric pressure is for control the motor of air inlet and outlet. With help of the sensor installed outside the greenhouse provide information about positive/negative pressure inside the greenhouse. Finlay the software read accurate temp/humid value of the Si7021, and only atmospheric pressure of BMP180, the temperature sensor inside the BMP180 is used only by the sensor itself to provide accurate atmospheric pressure measurements. The sensor can be used also for home automation, and drone applications where is needed correction of the UAV barometric sensor compared to the ground barometric sensor, also humidity measurement can help the pilot to calculate more accurate flying time.
Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

33

0
Votes

33
Posts

13722
Views

@BulldogLowell said: @mntlvr said: And if all six switches are set to gnd the total current would only be 1.5 ma (5volts /20k)x6=.0015 amps I believe. the internal pullup resistors are 20k-50k according to arduino spec. yeah, I know, but if you are underpowered already (the radio....) the extra draw may create an issue... who the heck knows. I'll try on one of mine when I get the chance... your code works, and that's a treat, but now I need to understand why the simpler execution of the same code doesn't seem to cooperate with your rig. weird... you code with pinMode(buttonPin[i], INPUT); exactly same board and USB power supply and same transceiver, here are the results Sending device info...sensor started, id 32 send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1 send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0 read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15 Setting up Pin0 send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin1 send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin2 send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin3 send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: Setting up Pin4 send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: Setting up Pin5 send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok: read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch Sensor presentation complete send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1 Pin 3 changed state... New State: Tripped send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1 Pin 0 changed state... New State: Tripped send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1 Pin 1 changed state... New State: Tripped send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1 Pin 2 changed state... New State: Tripped send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:0 Pin 3 changed state... New State: Not Tripped

💬 Detecting Mains Voltage Module

Suggested Topics

💬 MyPulse Sensor
OpenHardware.io • sensor pulse counter • • openhardware.io

In line humidity sensor
Hardware • sensor humidity • • dsabol

Current Monitoring - How?
Hardware • arduino sensor sketch current • • Dean

💬 Soil-moisture-meter
OpenHardware.io • sensor soil moisture meter • • openhardware.io

💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

35
Online

11.6k
Users

11.2k
Topics

112.9k
Posts

💬 Detecting Mains Voltage Module

Suggested Topics

💬 MyPulse Sensor OpenHardware.io • sensor pulse counter • • openhardware.io

In line humidity sensor Hardware • sensor humidity • • dsabol

Current Monitoring - How? Hardware • arduino sensor sketch current • • Dean

💬 Soil-moisture-meter OpenHardware.io • sensor soil moisture meter • • openhardware.io

💬 GPS Sensor Announcements • mysensors sensor gps • • hek

💬 Temperature-Humidity-Pressure Sensor OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge My Project • sensor • • mntlvr

35Online

11.6kUsers

11.2kTopics

112.9kPosts

💬 MyPulse Sensor
OpenHardware.io • sensor pulse counter • • openhardware.io

In line humidity sensor
Hardware • sensor humidity • • dsabol

Current Monitoring - How?
Hardware • arduino sensor sketch current • • Dean

💬 Soil-moisture-meter
OpenHardware.io • sensor soil moisture meter • • openhardware.io

💬 GPS Sensor
Announcements • mysensors sensor gps • • hek

💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

35
Online

11.6k
Users

11.2k
Topics

112.9k
Posts