Battery life of sensors.
-
I have some sensors running for months. The sensors send their battery life to the controller. 3.3V = 100% 1.9V = 0%.
But the sensors stop working around 40-45%. The voltage is around 2.5V. I tested all the sensors on 1.9V and they all worked fine. But i think the current is the problem. The batteries can't deliver enough power to let the sensor send data with the NRF.
I used zinc chloride batteries. Don't know if Alkalines are better? All the sensors use 10-20uF capacitors.
Is there a way to improve this?
-
I have some sensors running for months. The sensors send their battery life to the controller. 3.3V = 100% 1.9V = 0%.
But the sensors stop working around 40-45%. The voltage is around 2.5V. I tested all the sensors on 1.9V and they all worked fine. But i think the current is the problem. The batteries can't deliver enough power to let the sensor send data with the NRF.
I used zinc chloride batteries. Don't know if Alkalines are better? All the sensors use 10-20uF capacitors.
Is there a way to improve this?
-
I have some sensors running for months. The sensors send their battery life to the controller. 3.3V = 100% 1.9V = 0%.
But the sensors stop working around 40-45%. The voltage is around 2.5V. I tested all the sensors on 1.9V and they all worked fine. But i think the current is the problem. The batteries can't deliver enough power to let the sensor send data with the NRF.
I used zinc chloride batteries. Don't know if Alkalines are better? All the sensors use 10-20uF capacitors.
Is there a way to improve this?
-
Opened all my pir/light sensors to look what batteries were inside. I have 1 node thats on 38% with zinc philips batteries and still work fine. the ones with panasonic zinc batteries died around 40-45%. I have some with GP alkaline that are still around 70-80% so have to wait what they will do (looks like they don't drop as quickly as the zinc batteries).
-
Opened all my pir/light sensors to look what batteries were inside. I have 1 node thats on 38% with zinc philips batteries and still work fine. the ones with panasonic zinc batteries died around 40-45%. I have some with GP alkaline that are still around 70-80% so have to wait what they will do (looks like they don't drop as quickly as the zinc batteries).
-
I have heard somewhere that zinc-chloride batteries are not suitable for this kind of application. I have also been testing various batteries, all alkaline. Basically I have found you get what you pay for. I tried some local supermarket branded alkaline's and had your result. About 45% they just died. Then I tested a different 'cheap' brand, same result. Upgraded to more expensive brand name and got to ~20% consistently. Then tried top of the line (price wise) brand name - and they have been excellent! I have one node - DS18B20 temperature node in the attic for 6 months - exposed to 0 deg. F to 118 deg. F from winter to summer - and it shows 11% left. Key information is they are AAA, and the BATT_MIN is set to 1.65V! Hope this experience helps.
