Test your home made controller with MockMySensors (w/ tutorial)

[blacey]

Very cool. I think the appropriate term would be "mock" sensors as is common in software where one mock objects for testing.

[barduino]

Guys

No pun intended.

I admire and appreciate your work with my sensors library

Cheers

[barduino]

Hi Folks

Did a major refactor on this thing and was able to do some preliminery testing.

Due to memory limitations on the Arduino, you now can comment/uncomment the sensors you would like to test. I was able to test about 12 sensors at a time (if i turn off the MySensor library debug).

It is able to fake/mock the 24 sensors on the 1.4.1 MySensors Library.

Nest steps will be:

• remove the read/write from the eprom

• include the extra sensors supported by library version 1.5.

• Implement a way to request sensor information (where it makes sense)

Not necessarily in this order...

With this I now have plenty of information to use in my controller HAALL

It has also made a very good exercise in creating MySensors code.

By the way I would like some advice from the arduino experts here....

As I mentioned you can comment/uncomment the sensors declarations on the beginning, I use a lot of #ifdef in the code.

My question is: Is there a more elegant solution for this?

e.g. for the dimmer sensor:

//declaration
#define ID_S_DIMMER                   5
---
//Message
#ifdef ID_S_DIMMER
  MyMessage msg_S_DIMMER(ID_S_DIMMER,V_DIMMER);
#endif
---
//set up - presentation
#ifdef ID_S_DIMMER
    Serial.println("  S_DIMMER");
    gw.present(ID_S_DIMMER,S_DIMMER);
    gw.wait(SHORT_WAIT);
  #endif
---
// loop
#ifdef ID_S_DIMMER
    dimmer();
  #endif
---
// read function
#ifdef ID_S_DIMMER
void dimmer(){

  int dimmerVal = gw.loadState(ID_S_DIMMER);
  
  Serial.print("Dimmer is set to: " );
  Serial.println(dimmerVal);
  
  gw.send(msg_S_DIMMER.set(dimmerVal));

}
#endif
---
// incoming message switch
#ifdef ID_S_DIMMER
    case V_DIMMER:
          if ((message.getInt()<0)||(message.getInt()>100)) {
            Serial.println( "V_DIMMER data invalid (should be 0..100)" );
            break;
          }
          gw.saveState(ID_S_DIMMER, message.getInt());
          Serial.print("Incoming change for ID_S_DIMMER:");
          Serial.print(message.sensor);
          Serial.print(", New status: ");
          Serial.println(message.getInt());
    break;
    #endif

Also, suggestions to remove the read/write from the eprom are welcome.

For those who are building custom controllers, the comments on the v1.5 library help to clarify a few things.

For example, there is no formal relation between the sensor type and the message type (and to me it wasn't always obvious), however that relation is somewhat establshed in the comments of lib 1.5.

Thanks guys.

As always, feedback is very welcome!!!!

Cheers

[barduino]

Hi Folks,

Though i give out an update on the MockMySensors thing...

Here is a pic

Cheers

[gregl]

Nice work and great idea.

When I was getting started I too didn't have enough arduinos/radios to test different bits with it was a pain...or wanting to try out Hek's latest and greatest sensor/sketch to see what it looks like in Vera/Imperihome... but I never thought to create a sketch to just pretend it had the hardware...great thinking!

Q: What GUI is that?

[barduino]

@gregl

I'm one of the crazy ones who decided to build it own controller (see here: Meet HAALL)

Still very much work in progress, but I needed this MockMySensors to get it going.

Cheers

[gregl]

Wow - nice work again! Im in bed with Vera and looking at OpenHAB, but what you have created looks very nice and a good start!

[TimO]

Very good idea! Thanks a lot!
I've tested it against my OH2 binding and it works like a charm.

One thing didn't work though, for S_DIMMER there is a value of 255 submitted, which was read from the eeprom. At this point OH2 grumbles because the value is >100%. ;-)

[AWI]

@barduino said:

My question is: Is there a more elegant solution for this?

Not very elegant, but just a different idea. Ability to extend it to more then 24 sensors and 1.5. I built it to test my own controller script. Not complete yet...I doubt it will ever be ;)

/*
 PROJECT: MySensors
 PROGRAMMER: AWI
 DATE: 10 august 2015
 FILE: AWI_Universal_Test_50.ino
 LICENSE: Public domain
   -in conjunction with MySensors
  
 SUMMARY:
	multisensor for controller (sensor)testing
	
 Setup: sends values for al sensor specified in setup array 
  
 */
#include <MySensor.h>  
#include <SPI.h>

const int NODE_ID = 50;  		  		// fixed MySensors node ID
const int NoSensors = 36; 
const int NoTests = 40; 

// Sensor array: defines the sensors { Sensor_type (S_LIGHT) }, index number = sensor_id minus 1
byte MySensorList[NoSensors]={
	S_DOOR, // Door sensor, V_TRIPPED, V_ARMED
	S_MOTION,  // Motion sensor, V_TRIPPED, V_ARMED 
	S_SMOKE,  // Smoke sensor, V_TRIPPED, V_ARMED
	S_BINARY, // Binary light or relay, V_STATUS (or V_LIGHT), V_WATT (same as S_LIGHT)
	S_DIMMER, // Dimmable light or fan device, V_STATUS (on/off), V_DIMMER (dimmer level 0-100), V_WATT
	S_COVER, // Blinds or window cover, V_UP, V_DOWN, V_STOP, V_DIMMER (open/close to a percentage)
	S_TEMP, // Temperature sensor, V_TEMP
	S_HUM, // Humidity sensor, V_HUM
	S_BARO, // Barometer sensor, V_PRESSURE, V_FORECAST
	S_WIND, // Wind sensor, V_WIND, V_GUST
	S_RAIN, // Rain sensor, V_RAIN, V_RAINRATE
	S_UV, // Uv sensor, V_UV
	S_WEIGHT, // Personal scale sensor, V_WEIGHT, V_IMPEDANCE
	S_POWER, // Power meter, V_WATT, V_KWH
	S_HEATER, // Header device, V_HVAC_SETPOINT_HEAT, V_HVAC_FLOW_STATE
	S_DISTANCE, // Distance sensor, V_DISTANCE
	S_LIGHT_LEVEL, // Light level sensor, V_LIGHT_LEVEL (uncalibrated in percentage),  V_LEVEL (light level in lux)
	S_ARDUINO_NODE, // Used (internally) for presenting a non-repeating Arduino node
	S_ARDUINO_REPEATER_NODE, // Used (internally) for presenting a repeating Arduino node 
	S_LOCK, // Lock device, V_LOCK_STATUS
	S_IR, // Ir device, V_IR_SEND, V_IR_RECEIVE
	S_WATER, // Water meter, V_FLOW, V_VOLUME
	S_AIR_QUALITY, // Air quality sensor, V_LEVEL
	S_CUSTOM, // Custom sensor 
	S_DUST, // Dust sensor, V_LEVEL
	S_SCENE_CONTROLLER, // Scene controller device, V_SCENE_ON, V_SCENE_OFF. 
	S_RGB_LIGHT, // RGB light. Send color component data using V_RGB. Also supports V_WATT 
	S_RGBW_LIGHT, // RGB light with an additional White component. Send data using V_RGBW. Also supports V_WATT
	S_COLOR_SENSOR,  // Color sensor, send color information using V_RGB
	S_HVAC, // Thermostat/HVAC device. V_HVAC_SETPOINT_HEAT, V_HVAC_SETPOINT_COLD, V_HVAC_FLOW_STATE, V_HVAC_FLOW_MODE
	S_MULTIMETER, // Multimeter device, V_VOLTAGE, V_CURRENT, V_IMPEDANCE 
	S_SPRINKLER,  // Sprinkler, V_STATUS (turn on/off), V_TRIPPED (if fire detecting device)
	S_WATER_LEAK, // Water leak sensor, V_TRIPPED, V_ARMED
	S_SOUND, // Sound sensor, V_TRIPPED, V_ARMED, V_LEVEL (sound level in dB)
	S_VIBRATION, // Vibration sensor, V_TRIPPED, V_ARMED, V_LEVEL (vibration in Hz)
	S_MOISTURE, // Moisture sensor, V_TRIPPED, V_ARMED, V_LEVEL (water content or moisture in percentage?) 
};

// sensor data types
// typedef enum {P_STRING, P_BYTE, P_INT16, P_UINT16, P_LONG32, P_ULONG32, P_CUSTOM, P_FLOAT32 } MyTypes ;
/*
*/

// Test array: defines the sensor test patterns
// { sensorId ; sensorMessage ; type (MyTypes) ; lowValue(byte) ; highValue(byte) ; step }
// integer values take normal step, float values take reciproke step
int myTestData[NoTests][6]={
 {0, V_TRIPPED, P_BYTE, 30, 50, 2}, // DOOR
 {1, V_TRIPPED, P_BYTE, 30, 40, 2},  // MOTION
 {2, V_TRIPPED, P_BYTE, 30, 30, 2},  // SMOKE
 {3, V_STATUS, P_BYTE, 30, 40, 2},  // BINARY
 {4, V_PERCENTAGE, P_BYTE, 30, 30, 2},  // DIMMER
 {5, V_PERCENTAGE, P_BYTE, 30, 40, 2},  // COVER 
 {6, V_TEMP, P_FLOAT32, 30, 30, 2},  // TEMP
 {7, V_HUM, P_FLOAT32, 30, 40, 2},  // HUM
 {8, V_PRESSURE, P_FLOAT32, 30, 30, 2},  // BARO
 {9, V_WIND, P_BYTE, 30, 40, 2},  // WIND
 {10, V_RAIN, P_BYTE, 30, 30, 2}, // RAIN
 {11, V_UV, P_BYTE, 30, 40, 2}, // UV
 {12, V_WEIGHT, P_BYTE, 30, 30, 2}, // WEIGHT
 {13, V_KWH, P_FLOAT32, 30, 40, 2}, // POWER
 {13, V_WATT, P_FLOAT32, 30, 40, 2}, // POWER
 {14, V_HEATER, P_BYTE, 30, 30, 2}, // HEATER
 {15, V_DISTANCE, P_BYTE, 30, 40, 2}, // DISTANCE
 {16, V_LIGHT_LEVEL, P_BYTE, 30, 50, 2}, // LIGHT_LEVEL
 {19, V_LOCK_STATUS, P_BYTE, 30, 40, 2}, // LOCK
 {20, V_IR_SEND, P_BYTE, 30, 30, 2}, // IR
 {20, V_IR_RECEIVE, P_BYTE, 30, 30, 2}, // IR
 {21, V_VOLUME, P_BYTE, 30, 40, 2}, // WATER
 {22, V_LEVEL, P_FLOAT32, 30, 30, 2}, // AIR QUALITY
 {23, V_STATUS, P_BYTE, 30, 40, 2}, // CUSTOM
 {24, V_LEVEL, P_BYTE, 30, 30, 2}, // DUST
 {25, V_SCENE_ON, P_BYTE, 30, 40, 2},  // SCENE
 {25, V_SCENE_OFF, P_BYTE, 30, 40, 2},  // SCENE
 {26, V_RGB, P_ULONG32, 30, 30, 2},  // RGB
 {27, V_RGBW, P_BYTE, 30, 40, 2},  // RGBW
 {28, V_RGB, P_BYTE, 30, 30, 2},  // COLOR
 {29, V_HVAC_SETPOINT_HEAT, P_BYTE, 30, 40, 2},  // HVAC
 {30, V_VOLTAGE, P_BYTE, 30, 30, 2},  // MULTIMETER
 {30, V_CURRENT, P_BYTE, 30, 30, 2},  // MULTIMETER
 {30, V_IMPEDANCE, P_BYTE, 30, 30, 2},  // MULTIMETER
 {31, V_STATUS, P_BYTE, 30, 40, 2},  // SRINKLER
 {32, V_TRIPPED, P_BYTE, 30, 50, 2},  // WATER_LEAK
 {33, V_TRIPPED, P_BYTE, 30, 40, 2},  // SOUND
 {34, V_TRIPPED, P_BYTE, 30, 30, 2},  // VIBRATION
 {35, V_TRIPPED, P_BYTE, 30, 40, 2},  // MOISTURE
};


// initialize MySensors
MyTransportNRF24 transport(7, 8); // Ceech board, 3.3v (7,8)  (pin default 9,10)
MySensor gw(transport); 	      			
// Initialize messages, not used here
MyMessage Msg;                    // instantiate message to fill "on the fly

// storage of last values - if you onlys want to send changes (I don't)
float lastHum, lastTemp, lastPressure, lastLux ;
unsigned long SLEEP_PERIOD = 1000 ;   // Sleep period in ms)  
unsigned long loopDelay = 1000 ;      // Sleep period in ms)  

void setup() {
  Serial.println("\n  Stress test for Mysensors network (201508).\n");
  gw.begin(incomingMessage, NODE_ID); 											// start MySensors, manual set node ID
  // Send the sketch version information to the gateway and Controller
  gw.sendSketchInfo("AWI Universal test 50", "1.0");
  // Register all sensors to gw (they will be created as child devices)
  for (int i = 0; i < NoSensors ; i++) { 
    gw.present(i+1,MySensorList[i] ); // present all sensors in list
    gw.wait(loopDelay);
  }
}

void loop()
{
  gw.process();           // check if message from controller
  for (int i = 0; i < NoTests ; i++) { 
    Msg.setSensor(myTestData[i][0]);    // set the sensor number, byte 0
    Msg.setType(myTestData[i][1]);      // set the sensor type, byte 1
    switch (myTestData[i][2]) {         // determine type of data for test and use in send
      case P_BYTE:
        for (byte j = myTestData[i][3]; i < myTestData[i][4] ; j += myTestData[i][5])
        {
          gw.send(Msg.set(i, true ));
          gw.sleep(SLEEP_PERIOD);
        }
      break;
      case P_INT16:
        for (int j = myTestData[i][3]; i < myTestData[i][4] ; j += myTestData[i][5])
        {
          gw.send(Msg.set(i, true ));
          gw.sleep(SLEEP_PERIOD);
        }
        break;
      case P_UINT16:
        for (unsigned int j = myTestData[i][3]; i < myTestData[i][4] ; j += myTestData[i][5])
        {
          gw.send(Msg.set(i, true ));
          gw.sleep(SLEEP_PERIOD);
        }
      break;
      case P_ULONG32:
        for (unsigned long j = myTestData[i][3]; i < myTestData[i][4] ; j += myTestData[i][5])
        {
          gw.send(Msg.set(i, true ));
          gw.sleep(SLEEP_PERIOD);
        }
      break;
      case P_FLOAT32:
        for (float j = myTestData[i][3]; i < myTestData[i][4] ; j += 1/myTestData[i][5])  // reciproke step for float
        {
          gw.send(Msg.set(i, true ));
          gw.sleep(SLEEP_PERIOD);
        }
      break;
      default: 
        // do nothing
    gw.sleep(SLEEP_PERIOD);
    }
  }
}

void incomingMessage(const MyMessage &message) {
 Serial.print("Incoming Message");
 // We wait for V_... value
// if (message.type == V_DISTANCE) {
     Serial.print("Incoming change for sensor:");
     Serial.print(message.sensor);
     Serial.print(" (type : ");
     Serial.print(message.type);
     Serial.print(")");
     Serial.print(", status: ");
     Serial.println(message.getInt());
 //}
}

[barduino]

@TimO
Yes, it still has the init value of the eprom...
Good feed back, i'll initialize it to 0 or something.
Thanks

[barduino]

@AWI
Very interesting and compacts, probably avoids the memory limitations on UNO.
Great feedback, thanks!

[akbooer]

@barduino

Please excuse newness and ignorance (which go hand-in-hand.) Do I understand correctly that this sketch replaces a serial gateway? If so, what changes might be required to make this work for an ethernet gateway? Or, perhaps, do I have this all completely wrong?

I'm wanting to check out an ethernet connection between a Vera controller (or equivalent) and a Uno, on which I plan to run an internet gateway when I have built some sensors. Not yet having connected a radio, can I use this to mock up some sensors sending data to the Vera gateway plugin, just from an ethernet connected Uno?

Any help appreciated.

[barduino]

@akbooer

Hi, this sketch does not replace a gateway. It simulates a node with many sensors.

So its like having an arduino with 24 sensors connected to it (all fake, done by software) it still needs the gateway and radios, etc.

Some folks here in the forum have made experiences in creating sensors directly on a gateway, not sure if it is supported.

If so, it might be possible to Mock sensors in the gatway using such a technique...

Food for thought/investigation,

Cheers

[akbooer]

OK and thanks for the quick response!
I knew I knew nothing.

So, just to be sure, I run this on an Arduino with a radio, but not sensors. This is going to talk to my Arduino gateway, with radio, and either serial or ethernet connection to the controller, whichever I choose.

[barduino]

@akbooer

That is correct.

Also, because i'm having some issues updating the source code in git hub here is the latest version (lib 1.5) MockMySensors.ino and l(lib 1.4) FakeMySensorsOrig.ino

Cheers

[akbooer]

Thanks so much.

[ch3b7]

all sensors present good but when finish i get a loop sended:

send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0

im use (lib 1.5) MockMySensors.ino

[barduino]

@ch3b7

Very interesting.
I was not able to repruduce what you are describing above.

According to your message we have:

• Node 50 sending to node 0

• Child sensor id 0

• Message type 1 : SET

• MessageSub Type 16: V_TRIPPED

• Payload type 7: P_CUSTOM

• Payload length 5

Which is very strange.
In MockMySensors there is no childid=0, the first sensor is #define ID_S_DOOR 1 and the node ID is set to 254 (but perhpas you have changed this)
Also V_TRIPPED should be sending a bolean value...

Could you upload your scetch?

here is my log: SetUP

send: 254-254-0-0 s=255,c=0,t=17,pt=0,l=3,sg=0,st=ok:1.5
send: 254-254-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-254 s=255,c=3,t=6,pt=0,l=1,sg=0:M
sensor started, id=254, parent=0, distance=1
GW Started
Send Sketch Info: send: 254-254-0-0 s=255,c=3,t=11,pt=0,l=14,sg=0,st=ok:MockMySensors 
send: 254-254-0-0 s=255,c=3,t=12,pt=0,l=4,sg=0,st=ok:v0.3
MockMySensors v0.3
Get Config: Metric
Presenting Nodes
________________
  S_DOOR
send: 254-254-0-0 s=1,c=0,t=0,pt=0,l=0,sg=0,st=ok:
  S_MOTION
send: 254-254-0-0 s=2,c=0,t=1,pt=0,l=0,sg=0,st=ok:
  S_SMOKE
send: 254-254-0-0 s=3,c=0,t=2,pt=0,l=0,sg=0,st=ok:
  S_LIGHT
send: 254-254-0-0 s=4,c=0,t=3,pt=0,l=0,sg=0,st=ok:
  S_DIMMER
send: 254-254-0-0 s=5,c=0,t=4,pt=0,l=0,sg=0,st=ok:
  S_COVER
send: 254-254-0-0 s=6,c=0,t=5,pt=0,l=0,sg=0,st=ok:
  S_TMEP
send: 254-254-0-0 s=7,c=0,t=6,pt=0,l=0,sg=0,st=ok:
  S_HUM
send: 254-254-0-0 s=8,c=0,t=7,pt=0,l=0,sg=0,st=ok:
  S_BARO
send: 254-254-0-0 s=9,c=0,t=8,pt=0,l=0,sg=0,st=ok:
  S_WIND
send: 254-254-0-0 s=10,c=0,t=9,pt=0,l=0,sg=0,st=ok:
  S_RAIN
send: 254-254-0-0 s=11,c=0,t=10,pt=0,l=0,sg=0,st=ok:
  S_UV
send: 254-254-0-0 s=12,c=0,t=11,pt=0,l=0,sg=0,st=ok:
  S_WEIGHT
send: 254-254-0-0 s=13,c=0,t=12,pt=0,l=0,sg=0,st=ok:
  S_POWER
send: 254-254-0-0 s=14,c=0,t=13,pt=0,l=0,sg=0,st=ok:
  S_DISTANCE
send: 254-254-0-0 s=16,c=0,t=15,pt=0,l=0,sg=0,st=ok:
  S_LIGHT_LEVEL
send: 254-254-0-0 s=17,c=0,t=16,pt=0,l=0,sg=0,st=ok:
  S_LOCK
send: 254-254-0-0 s=18,c=0,t=19,pt=0,l=0,sg=0,st=ok:
  S_IR
send: 254-254-0-0 s=19,c=0,t=20,pt=0,l=0,sg=0,st=ok:
  S_WATER
send: 254-254-0-0 s=20,c=0,t=21,pt=0,l=0,sg=0,st=ok:
  S_AIR_QUALITY
send: 254-254-0-0 s=21,c=0,t=22,pt=0,l=0,sg=0,st=ok:
  S_SCENE_CONTROLLER
send: 254-254-0-0 s=23,c=0,t=25,pt=0,l=0,sg=0,st=ok:
  S_CUSTOM
send: 254-254-0-0 s=24,c=0,t=23,pt=0,l=0,sg=0,st=ok:
________________

And the loop section

########################
RandomNumber:76
Send Battery Level
send: 254-254-0-0 s=255,c=3,t=0,pt=1,l=1,sg=0,st=ok:76
Request Time
send: 254-254-0-0 s=255,c=3,t=1,pt=0,l=0,sg=0,st=ok:
read: 0-0-254 s=255,c=3,t=1,pt=0,l=10,sg=0:1439720967
Time value received: 1439720967
Motion is: Quiet
send: 254-254-0-0 s=2,c=1,t=16,pt=2,l=2,sg=0,st=ok:0
Smoke is: Quiet
send: 254-254-0-0 s=3,c=1,t=16,pt=2,l=2,sg=0,st=ok:0
Light is: On
send: 254-254-0-0 s=4,c=1,t=2,pt=2,l=2,sg=0,st=ok:1
Dimmer is set to: 255
send: 254-254-0-0 s=5,c=1,t=3,pt=2,l=2,sg=0,st=ok:255
Cover is : Idle
send: 254-254-0-0 s=6,c=1,t=31,pt=2,l=2,sg=0,st=ok:31
Temperature is: 34
send: 254-254-0-0 s=7,c=1,t=0,pt=4,l=4,sg=0,st=ok:34
Humitidty is: 76
send: 254-254-0-0 s=8,c=1,t=1,pt=4,l=4,sg=0,st=ok:76
Atmosferic Pressure is: 103363
send: 254-254-0-0 s=9,c=1,t=4,pt=4,l=4,sg=0,st=ok:103363
Weather forecast: unstable
send: 254-254-0-0 s=9,c=1,t=5,pt=0,l=8,sg=0,st=ok:unstable
Wind Speed is: 76
send: 254-254-0-0 s=10,c=1,t=8,pt=4,l=4,sg=0,st=ok:76
Wind Gust is: 86
send: 254-254-0-0 s=10,c=1,t=9,pt=4,l=4,sg=0,st=ok:86
Wind Direction is: 272
send: 254-254-0-0 s=10,c=1,t=10,pt=4,l=4,sg=0,st=ok:272
Rain ammount  is: 76
send: 254-254-0-0 s=11,c=1,t=6,pt=4,l=4,sg=0,st=ok:76
Rain rate  is: 1
send: 254-254-0-0 s=11,c=1,t=7,pt=7,l=5,sg=0,st=ok:1.0
Ultra Violet level is: 11
send: 254-254-0-0 s=12,c=1,t=11,pt=4,l=4,sg=0,st=ok:11
Weight is: 113
send: 254-254-0-0 s=13,c=1,t=12,pt=4,l=4,sg=0,st=ok:113
Impedance is: 113
send: 254-254-0-0 s=14,c=1,t=14,pt=4,l=4,sg=0,st=ok:113
Watt is: 113
send: 254-254-0-0 s=14,c=1,t=17,pt=4,l=4,sg=0,st=ok:113
KWH is: 113
send: 254-254-0-0 s=14,c=1,t=18,pt=4,l=4,sg=0,st=ok:113
Voltage is: 113
send: 254-254-0-0 s=14,c=1,t=38,pt=4,l=4,sg=0,st=ok:113
Current is: 113
send: 254-254-0-0 s=14,c=1,t=39,pt=4,l=4,sg=0,st=ok:113
Distance is: 113
send: 254-254-0-0 s=16,c=1,t=13,pt=4,l=4,sg=0,st=ok:113
Light is: 113
send: 254-254-0-0 s=17,c=1,t=23,pt=4,l=4,sg=0,st=ok:113
Lock is: On
send: 254-254-0-0 s=18,c=1,t=36,pt=2,l=2,sg=0,st=ok:1
Infrared is: 255
send: 254-254-0-0 s=19,c=1,t=32,pt=2,l=2,sg=0,st=ok:255
Water flow is: 113
send: 254-254-0-0 s=20,c=1,t=34,pt=4,l=4,sg=0,st=ok:113
Water volume is: 113
send: 254-254-0-0 s=20,c=1,t=35,pt=4,l=4,sg=0,st=ok:113
Air Quality is: 76
send: 254-254-0-0 s=21,c=1,t=24,pt=4,l=4,sg=0,st=ok:76
Scene is: On
send: 254-254-0-0 s=23,c=1,t=19,pt=2,l=2,sg=0,st=ok:1
Custom value is: 76
send: 254-254-0-0 s=24,c=1,t=25,pt=4,l=4,sg=0,st=ok:76
send: 254-254-0-0 s=24,c=1,t=26,pt=4,l=4,sg=0,st=ok:76
send: 254-254-0-0 s=24,c=1,t=27,pt=4,l=4,sg=0,st=ok:76
send: 254-254-0-0 s=24,c=1,t=28,pt=4,l=4,sg=0,st=ok:76
send: 254-254-0-0 s=255,c=3,t=0,pt=1,l=1,sg=0,st=ok:76
#########################

[ch3b7]

@barduino

sorry your sketch work good! the problem im have is with the @AWI example!

@AWI

all sensors present good but when finish i get a loop sended:

send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0
send: 50-50-0-0 s=0,c=1,t=16,pt=7,l=5,sg=0,st=ok:0.0

[AWI]

@ch3b7 Sorry to have confused you but my sketch was meant for inspiration and as an alternative method to "stress test" the controller and network.
The version I published is firing an enormous amount of messages at the controller for each sensor. The test data is in myTestData in the format {sensor, V_type, Dataformat, start_value, end_value, stepsize} You can fill the array with anything you want (also "not allowed" combinations).
I suggest you remove the "ack" which is sent with each message at firtst {gw.send(Msg.set(i, false ))};