Help with script for controlling Wemo bulbs.
General Discussion
8
Posts
3
Posters
3.6k
Views
3
Watching
-
I found this script that is supposed to be able to control all Wemo prodcuts including the Wemo bulbs but I can't quite get it to work. I can use LINK LIST and get all connected devices, I can also use GETSTATE and gets the correct state of my bulbs. But I can't toggle or turn any of them on or off. I get "INFO: Connected to 192.168.0.200:49153" -in response and nothing happens.
Does anyone know how to fix this?
(I had to replace all "==" with "=" to get the script to work)#!/bin/sh # # WeMo Control Script # # Original author: rich@netmagi.com # # Modified 7/13/2014 by Donald Burr # email: <dburr@DonaldBurr.com> # web: <http://DonaldBurr.com> # # Modified 05/12/2014 by Jack Lawry # email: <jack@jacklawry.co.uk> # web: <http://www.jacklawry.co.uk> # # Modified 31/05/2015 by Wagner Oliveira # * Fixed Port parameter and added Support for WeMo Link LED Bulbs # email: <wbbo@hotmail.com> # web: <http://guino.home.insightbb.com> # # Usage: wemo IP_ADDRESS[:PORT] ON|OFF|TOGGLE|GETSTATE|GETSIGNALSTRENGTH|GETFRIENDLYNAME # or: wemo IP_ADDRESS[:PORT] LINK [LIST|NAME ON [0-255]|OFF] if [ "$1" = "" ]; then echo "Usage: wemo IP_ADDRESS[:PORT] ON|OFF|TOGGLE|GETSTATE|GETSIGNALSTRENGTH|GETFRIENDLYNAME" echo " or: wemo IP_ADDRESS[:PORT] LINK [LIST|NAME ON [0-255]|OFF]" exit 1 fi IP=$1 CMD=`echo $2 | tr '[a-z]' '[A-Z]'` PORT=0 IPHASPORT=$(echo $IP | grep :) if [ "$IPHASPORT" == "" ]; then for PTEST in 49154 49152 49153 49155 do PORTTEST=$(curl -s -m 3 $IP:$PTEST | grep "404") if [ "$PORTTEST" != "" ]; then PORT=$PTEST break fi done if [ $PORT = 0 ]; then echo "Cannot find a port" exit fi echo "INFO: Connected to" $1":"$PORT else PORT=$(echo $IP | awk -F : '{print $2}') IP=$(echo $IP | awk -F : '{print $1}') echo "Using provided port: $PORT" fi if [ "$CMD" = "GETSTATE" ]; then STATE=`curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#GetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>1</BinaryState></u:GetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 | sed 's/0/OFF/g' | sed 's/1/ON/g'` echo $STATE if [ "$STATE" = "OFF" ]; then exit 0 elif [ "$STATE" = "ON" ]; then exit 1 else exit 2 fi elif [ "$CMD" = "TOGGLE" ]; then STATE=`curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#GetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>1</BinaryState></u:GetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 | sed 's/0/OFF/g' | sed 's/1/ON/g'` echo $STATE if [ "$STATE" = "OFF" ]; then # echo "ITS OFF - TURNING ON" curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#SetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>1</BinaryState></u:SetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 exit elif [ "$STATE" = "ON" ]; then # echo "ITS ON - TURNING OFF" curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#SetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>0</BinaryState></u:SetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 exit else # echo "UNKNOWN" exit fi elif [ "$CMD" = "ON" ]; then curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#SetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>1</BinaryState></u:SetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 elif [ "$CMD" = "OFF" ]; then curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#SetBinaryState\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetBinaryState xmlns:u="urn:Belkin:service:basicevent:1"><BinaryState>0</BinaryState></u:SetBinaryState></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<BinaryState" | cut -d">" -f2 | cut -d "<" -f1 elif [ "$CMD" = "GETSIGNALSTRENGTH" ]; then curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#GetSignalStrength\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetSignalStrength xmlns:u="urn:Belkin:service:basicevent:1"><GetSignalStrength>0</GetSignalStrength></u:GetSignalStrength></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<SignalStrength" | cut -d">" -f2 | cut -d "<" -f1 elif [ "$CMD" = "GETFRIENDLYNAME" ]; then curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:basicevent:1#GetFriendlyName\"" --data '<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetFriendlyName xmlns:u="urn:Belkin:service:basicevent:1"><FriendlyName></FriendlyName></u:GetFriendlyName></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/basicevent1 | grep "<FriendlyName" | cut -d">" -f2 | cut -d "<" -f1 elif [ "$CMD" = "LINK" ]; then # Get Unique Device Number and List of Devices/IDs UDN=$(wget -qO- http://$IP:$PORT/setup.xml | grep UDN | awk -F'>|<' '{print $3}') DEVS=$(curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#GetEndDevices\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetEndDevices xmlns:u="urn:Belkin:service:bridge:1"><ReqListType>SCAN_LIST</ReqListType><DevUDN>'$UDN'</DevUDN></u:GetEndDevices></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 | awk '{ gsub(">", "\n"); print }') if [ "$3" == "LIST" ]; then echo "$DEVS" | grep "Name" | awk -F "&" '{ print $1 }' | grep -v -e "^$" else GROUPNAMES=$(echo "$DEVS" | grep -iE '(/GroupID|/GroupName)' | awk -F "&" '{print $1}') BULBNAMES=$(echo "$DEVS" | grep -iE '(/FriendlyName|/DeviceID)' | awk -F "&" '{print $1}') ID=$(echo "$DEVS" | grep -iE '(/GroupID|/GroupName|/FriendlyName|/DeviceID)' | awk -F "&" '{print $1}' | awk 'NR%2{a=$0;next}{print $0 "@"a;}' | grep "$3" | awk -F @ '{print $2}') if [ "$ID" == "" ]; then echo "$3 was not found." exit 254 fi ISGROUP=$(echo "$GROUPNAMES" | grep "$ID") if [ "$ISGROUP" != "" ]; then ISGROUP="YES" else ISGROUP="NO" fi if [ "$4" == "ON" ]; then LEVEL=255 if [ "$5" != "" ]; then LEVEL=$5 fi # Send ON command curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#SetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceStatusList><?xml version="1.0" encoding="UTF-8"?><DeviceStatus><DeviceID>'$ID'</DeviceID><CapabilityID>10008</CapabilityID><CapabilityValue>'$LEVEL':0</CapabilityValue><IsGroupAction>'$ISGROUP'</IsGroupAction></DeviceStatus></DeviceStatusList></u:SetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null UPDATESTATUS=1 elif [ "$4" == "OFF" ]; then # Send OFF Command curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#SetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceStatusList><?xml version="1.0" encoding="UTF-8"?><DeviceStatus><DeviceID>'$ID'</DeviceID><CapabilityID>10008</CapabilityID><CapabilityValue>0:0</CapabilityValue><IsGroupAction>'$ISGROUP'</IsGroupAction></DeviceStatus></DeviceStatusList></u:SetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null UPDATESTATUS=1 elif [ "$4" == "TOGGLE" ]; then # Determine if device IS ON ISON=$(echo "$DEVS" | grep -iE '(/GroupCapabilityValues|/GroupName|/CurrentState|/FriendlyName)' | awk -F "&" '{print $1}' | awk 'NR%2{a=$0;next}{print a","$0;}' | grep "$3" | awk -F "," '{print $2}') LEVEL=$(echo "$DEVS" | grep -iE '(/GroupCapabilityValues|/GroupName|/CurrentState|/FriendlyName)' | awk -F "&" '{print $1}' | awk 'NR%2{a=$0;next}{print a","$0;}' | grep "$3" | awk -F "," '{print $3}') # echo "ISON=$ISON LEVEL=$LEVEL" if [ "$ISON" == "1" ]; then LEVEL="0" fi # Send Command to TOGGLE curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#SetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:SetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceStatusList><?xml version="1.0" encoding="UTF-8"?><DeviceStatus><DeviceID>'$ID'</DeviceID><CapabilityID>10008</CapabilityID><CapabilityValue>'$LEVEL':0</CapabilityValue><IsGroupAction>'$ISGROUP'</IsGroupAction></DeviceStatus></DeviceStatusList></u:SetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null UPDATESTATUS=1 elif [ "$4" == "GETSTATE" ]; then echo "$DEVS" | grep -iE '(/GroupCapabilityValues|/GroupName|/CurrentState|/FriendlyName)' | awk -F "&" '{print $1}' | awk 'NR%2{a=$0;next}{print a","$0;}' | grep "$3" | awk -F "," '{print "ON: "$2"\nLevel: "$3}' else SHOWUSAGE=1 fi fi else SHOWUSAGE=1 fi # When you switch LEDs ON/OFF you must request the device status so it will correctly report it later when you use GETSTATE if [ "$UPDATESTATUS" == "1" ]; then if [ "$ISGROUP" == "YES" ]; then GRPIDS=$(echo "$DEVS" | grep -iE '(/GroupID)' | awk -F "&" '{print $1}' | awk '{print}' ORS=',' | awk '{print substr($0, 0, length($0)-1)}') DEVIDS=$(echo "$DEVS" | grep -iE '(/DeviceID)' | awk -F "&" '{print $1}' | awk '{print}' ORS=',' | awk '{print substr($0, 0, length($0)-1)}') # echo "GRPIDS=$GRPIDS ** DEVIDS=$DEVIDS" curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#GetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceIDs>'$GRPIDS'</DeviceIDs></u:GetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#GetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceIDs>'$DEVIDS'</DeviceIDs></u:GetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null else curl -0 -A '' -X POST -H 'Accept: ' -H 'Content-type: text/xml; charset="utf-8"' -H "SOAPACTION: \"urn:Belkin:service:bridge:1#GetDeviceStatus\"" --data '<?xml version="1.0"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><u:GetDeviceStatus xmlns:u="urn:Belkin:service:bridge:1"><DeviceIDs>'$ID'</DeviceIDs></u:GetDeviceStatus></s:Body></s:Envelope>' -s http://$IP:$PORT/upnp/control/bridge1 > /dev/null fi fi if [ "$SHOWUSAGE" == "1" ]; then echo "COMMAND NOT RECOGNIZED" echo "" echo "Usage: wemo IP_ADDRESS[:PORT] ON|OFF|TOGGLE|GETSTATE|GETSIGNALSTRENGTH|GETFRIENDLYNAME" echo " or: wemo IP_ADDRESS[:PORT] LINK [LIST|NAME ON [0-255]|OFF|TOGGLE|GETSTATE]" exit 255 fi``` -
The person who wrote the script on another forum replied earlier to someone else who had problems:
You should try to download it from this link: http://guino.home.insightbb.com/wemo_control.sh The command line format should be: ./wemo_control IP_ADDRESS[:PORT] LINK [LIST|NAME ON [0-255]|OFF] But even with your incorrect parameters the errors you're getting suggest some sort of file formatting issue. Here is what it should look like: root@DD-WRT:/jffs/cgi# ./wemo_control.sh 10.10.10.6 LINK LIST INFO: Connected to 10.10.10.6:49154 Master Lightbulb 1 Lightbulb 3 Lightbulb 4 Lightbulb 2 root@DD-WRT:/jffs/cgi# ./wemo_control.sh 10.10.10.6 LINK Master GETSTATE INFO: Connected to 10.10.10.6:49154 ON: 0 Level: 1:0 Other than that maybe some sort of difference in the OS -- I tested the script on Mageia 4 and on my DD-WRT router (3.10) without any issues. Be sure to make the script executable (chmod 777 wemo_control.sh) and execute it with ./wemo_control <params> Last resort would be trying to replacing any == in an "if" line (all lines you listed with an error) for just = (a quick search online reveals that some sh versions don't like the ==) Let me know if that works... -
If I run the script unmodified I get:
pi@raspberrypi ~ $ ./wemo_control.sh 192.168.0.200 LINK LIST ./wemo_control.sh: 35: [: unexpected operator Using provided port: ./wemo_control.sh: 106: [: LIST: unexpected operator ./wemo_control.sh: 112: [: unexpected operator ./wemo_control.sh: 122: [: unexpected operator ./wemo_control.sh: 130: [: unexpected operator ./wemo_control.sh: 134: [: unexpected operator ./wemo_control.sh: 145: [: unexpected operator ./wemo_control.sh: 156: [: unexpected operator ./wemo_control.sh: 168: [: 1: unexpected operator -
Hi,
From one Wemo switch user to another, the best luck I had to control them from shell was using Ouimeaux. I would try that and see if that works for you over the .sh scripts.
My Projects
2 Door Chime Sensor
Washing Machine Monitor -
Hi,
From one Wemo switch user to another, the best luck I had to control them from shell was using Ouimeaux. I would try that and see if that works for you over the .sh scripts.
@drock1985
I have tried Ouimeaux but it was to slow for my liking. I have placed an arduino behind the a wallswitch that controls a wemo led that is alway powered. When I last tried Ouimeaux the reactiontime was around 5 seconds and my kids and wife would have flicked the switch 5-6 times before any reactions was seen.I then moved over to installing wemo manager + server on an android witch makes the reaction time go down to about 1-2 sec. But I must say that I would want the reaction time to be under 1 sec.
-
I'm not too sure you will get that reaction time from anything but the Wemo app itself, or the mechanical switch on the Wemo. The problem I found out with the Wemo is, it will randomize what port it connects to in a certain range. I can't remember the exact range (maybe 49152-49156?), but I think it's stated in the .sh script. Therefore, the script or whatever program that is doing the switching needs to first find the proper IP/Port, then actually run the command.
The one option you may have is setting a static IP to each Wemo switch, then sending it more direct.
To be all honest, this is why I switched from Wemo over to MySensors and the Relay sketch. Works much better than the Wemo's do, and haven't had a chance to buy and test any Zigbee wall switches yet.
