LiPo Batteries
-
Hello,
I have just received 4000 mAh LiPo but they rate 0V and under LiPo from Adafruit (https://www.adafruit.com/products/390) they advertize as full (green light) but cannot hold the load charge.
I'm trying to load it with a Li-Ion charger with a voltage control manually but I don't know if that will give anything for one loaded up to 3,980V has the same symptom as above...
As a reference, I have a 2000mAh from Particle.Io that works well to load or support the load.
any idea ?
-
@ceech the previous one I had were with your board, do you have some knowledge on this issue with batteries having pcm protection on ?
-
still no luck even with a better one...
-
found the issue, the polarity was wrong...
4 out of 4
Suggested Topics
-
Over the air updates
General Discussion • 23 Mar 2014, 21:38 • ToSa 1 Mar 2015, 11:21 -
"Remote Irrigation with LoRaWAN: LM27313 Challenges and PCB Design"
Hardware • 24 Jan 2024, 23:06 • wrendral 3 Feb 2024, 07:13 -
Newbie questions
Hardware • 14 Feb 2025, 20:03 • magwas 14 Feb 2025, 20:03 -
Sleep mode for bmp280
Hardware • 20 Feb 2018, 13:24 • fishermans 5 Feb 2024, 18:30 -
Does MySensors require Arduino Timer 2?
Hardware • 6 Jan 2024, 19:39 • OldSurferDude 11 Jan 2024, 04:39 -
Arduino Nano Every problem
Hardware • 1 Feb 2020, 09:18 • hakha4 5 Dec 2023, 02:21
