Replacing a DS2423 with a mysensors sensor, Possible?
-
As simple as it sounds. It there a easy way to replace a 1 Wire DS2423 (counter) with a Mysensors sensor?
I have an old 1-wire flow control sensor that has been connected to a DS2423 counter. I would rather use this flow control sensor with a Mysensors sensor instead, since I can't get hold of a new DS2423 (out of production since 2012)
The flow control sensor has three connections Vcc, GND and DATA. It is now attached the same way as a DS18B20 sensor with a resistor (4,7KOhm) between DATA and Vcc and then the DATA cable connects to a INPUT on the DS2423. Would it be possible to connect the DATA cable to a arduino port instead and let the arduino do the counting?
Anyone converted a 1 wire counter sensor before?
-
hello.
you need to look at pulsemeter arduino sketch. Like this one for instance but you will certainly need to change it a bit.
https://github.com/mysensors/MySensors/blob/development/examples/WaterMeterPulseSensor/WaterMeterPulseSensor.ino -
Thank you , Ill try that. I missed that one
I think my giving about 100 pulses / litre.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login