Raspberry PI running openhab and using it as a Mysensor gateway
-
I am trying to set up openhab 1.8_ on a raspberry pi using the pi as an Arduino gateway (i.e. I wired the NRF24L01 to the pi pins). I do not understand what "configure" commands I need to execute to get it to work with the openhab binding? Any help work be appreciated.
-
I am trying to set up openhab 1.8_ on a raspberry pi using the pi as an Arduino gateway (i.e. I wired the NRF24L01 to the pi pins). I do not understand what "configure" commands I need to execute to get it to work with the openhab binding? Any help work be appreciated.
@jmmorgan83 The good news is I was able to create a virtual serial port (tty64) using the pi as a gataway. It communicats with my node without problems. Unfortunely, when I add the line "mysensors:port=/dev/tty64" in the openhab.cfg file I get an error stating it can not find /dev/tty64 even though I can see it in the /dev directory. Any ideas?
Thanks -
Take a look at this thread: https://community.openhab.org/t/serial-binding-port-could-not-be-found/1993
It is another binding, but both work similar, maybe this works for you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login