Could use a bid help to get started

[mfalkvidd]

@Rene046 in the MySensorsArduinoExamples zip file is examples/DhtTemperatureAndHumiditySensor and libraries/DHT

You'll need both those folders.

[Rene046]

should i unzip those inside the mysensor map or arduino ?

[mfalkvidd]

@Rene046 I am not sure, but try putting DhtTemperatureAndHumiditySensor in the Arduino sketch folder (My Documents\Arduino on my computer) and DHT in the libraries folder (My Documents\Arduino\libraries on my computer)

[Rene046]

ok done that, opened the sketch sample for dht.
compile and i get :

H:\WINDOW~1\Temp\arduino_modified_sketch_660970\DhtTemperatureAndHumiditySensor.ino: In function 'void presentation()':

DhtTemperatureAndHumiditySensor:85: error: 'getConfig' was not declared in this scope

   metric = getConfig().isMetric;

                      ^

Multiple libraries were found for "DHT.h"
 Used: H:\WINDOWS GEBRUIKERS\MIJN_DOCUMENTEN\Arduino\libraries\DHT
 Not used: H:\WINDOWS GEBRUIKERS\MIJN_DOCUMENTEN\Arduino\libraries\DHT-sensor-library-master
exit status 1
'getConfig' was not declared in this scope

[mfalkvidd]

@Rene046 There are two DHT folders. Delete the DHT folder that didn't come from the MySensorsArduinoExamples zip file.

[Rene046]

ok now im left with this

H:\WINDOW~1\Temp\arduino_modified_sketch_225110\DhtTemperatureAndHumiditySensor.ino: In function 'void presentation()':

DhtTemperatureAndHumiditySensor:85: error: 'getConfig' was not declared in this scope

   metric = getConfig().isMetric;

                      ^

exit status 1
'getConfig' was not declared in this scope

[mfalkvidd]

@Rene046 see https://forum.mysensors.org/topic/5841/getconfig-was-not-declared-in-this-scope-v2-1-1-fixed/2
(change getConfig to getControllerConfig)

[Rene046]

thanks it works... i love you ..lol

why do they change basic commands.... this make it hard to use.......

Like this command and why make from mysensor.h mysensors.h.

i also looked inside domoticz and i got data

thank you very very much

[mfalkvidd]

@Rene046 the change from MySensor to MySensors is because the Arduino IDE requires the .h file to have exactly the same name as the library. That was not the case when MySensors was created, but happened some time in 2015 I think. So to comply with Arduino IDE rules, it had to be changed.

The reason for changing getConfig is logged at https://github.com/mysensors/MySensors/issues/736 but I am not sure why and the fix (https://github.com/mysensors/MySensors/pull/737 ) does not explain why either, but seems to be due to a mistake in https://github.com/mysensors/MySensors/commit/92cbd2ac8f49fe2f8cb25726e08aac9ecd597b84

[Rene046]

ok,

At least i can now experiment with other sensors for my weather station project.
i now all electronics are working, i saved this sketch and commented those changes.
Again thank you for getting me started.

[mfalkvidd]

@Rene046 you're welcome. Great that you got it working.

[Rene046]

can i ask another question....

Im trying to add a battery sense pin to the sketch. they use gw. commands, are those also changed in the new version ?they are not recognized....

They serail monitor shows me the voltage but how do i send it as and child to domoticz.

[mfalkvidd]

@Rene046 most commands were simplified in MySensors 2.0. If the example you found uses gw.send(), remove gw. and just use send().

[Rene046]

Thanks Mikael,

could i find those new commands somewhere

[mfalkvidd]

@Rene046 yes they are all documented in the api. https://www.mysensors.org/download/sensor_api_20