💬 Simple compact RS485 node (ATmega328 + MAX485)

[cabat]

@dzjr Ordering PCBs you will get only pcb, without components (no matter - SMD or TH). You may use PCB assebling service like JLCPCB or other, or you may solder SMD components yourself, it is not so hard, as you can think.

[dzjr]

@cabat Thanks,

i will give it a try!

[dzjr]

@cabat I have ordered four pcb's and the other components (resistors, capacitors, max485 and voltage regulator in china) and the ATmega at a german webshop.

do you have some advice for smd soldering?

[cabat]

@dzjr I am using simple solder station like 936 with 900M-T-I iron tip, first solder the MCU and pin-headers, programm with USBASP using pads SCK, MISO, MOSI, RES, VCC ang GND, then solder other components (MAX485, resistors and capacitors).

[dzjr]

@cabat unfortunately i am still waiting for the pcb's so i could try it unfortunately ...
Still listed as "In Fabrication" hope it comes soon ...

in the meantime I have received all parts

[cabat]

@dzjr I am ordered a new revision of this PCB at 2020.04.13, and the order status is "in fabrication" too, don't worry.

[cabat]

@dzjr This is terrible, but yesterday I received a message from PSBs.io that my order from 04/13/2020 is only sent ..

[dzjr]

@cabat

The PCB's i orderd are also send friday.

So i hope is came this week!

[dzjr]

@cabat The PCBs have been delivered !!

only now the weather is very nice here, so I don't feel like hanging out in the workshop ...

I'll let you know when I'm ready!

[cabat]

@dzjr Congrats! My works on hobby is not hard because of we have nice weather too :)