Raspberry Pi gateway + hass.io + MQTT + MySensors

[monte]

@Sebex yes, you can copy config over ssh, like every other directory you have access to. It should be located from where you were running scp command. Do you use linux on your desktop/laptop?
You can also create samba share on your raspberry with location of your config folder, and then access it from any pc on the network, it makes easy to config your HA.

Yes you can pull newer version of a container and all your config files should be in place.

Can't help you with UI speed, sorry. You can try to find anything on HA forum, maybe there is someone who made some performance tests.

[Sebex]

@monte thanks it worked using Samba. I use ssh from my mac. I also found the copied folder that I tried to copy with scp :laughing:

I tried pulling a new version but that didn't seem to work so easily. It seems to get stuck on initialising after which it shuts down and tries again. The logs show the error below, it's missing a file/directory. Not sure how to solve this.

2020/01/23 17:13:08 [error] 7#7: *1 open() "/usr/share/www/api/websocket" failed (2: No such file or directory), client: ::ffff:192.168.178.16, server: , request: "GET /api/websocket HTTP/1.1", host: "192.168.178.27:8123"
2020/01/23 17:13:15 [error] 7#7: *3 open() "/usr/share/www/api/websocket" failed (2: No such file or directory), client: ::ffff:192.168.178.16, server: , request: "GET /api/websocket HTTP/1.1", host: "192.168.178.27:8123"
2020/01/23 17:13:21 [error] 7#7: *4 open() "/usr/share/www/api/websocket" failed (2: No such file or directory), client: ::ffff:192.168.178.16, server: , request: "GET /api/websocket HTTP/1.1", host: "192.168.178.27:8123"

What I did to update the container is stop all running containers, and remove images, and re-execute the cmd for homeassistant again. Was this the way to go?

Also is there a way to copy the RPi settings? I quite often get a broken pipe and not sure what's causing it. I am thinking about reflashing the SD and reinstating the settings.

[monte]

@Sebex the best way to backup your Raspbian setup is to copy whole SD card to image file, apparently you can use mac's Disk Utility to do this.

I'm not sure how home assistant supervisor pulls and runs docker container, but it seems that it have some trouble. You can run setup script once again, maybe it will help.

For future, you should update via web ui. I've read that hassio images are updated later than standalone home assistant once. So you won't get update right away, when new version of HA is released. But when new version of hassio is released it will suggest you to update in Hass.io dashboard.

[Sebex]

@monte I had tried that one before, but know that it's useful to restore the file doesn't seem to work and I get an error. Perhaps bad luck, will have to try again.

In the meantime while reinstating HA I'm facing quite some difficulties in getting HA to install within docker via link. I'm facing a broken pipe quite often and have no idea how to fix this, tried different ssh settings but when installing HA it seems to get stuck at

pi@raspberrypi:~ $ sudo su
root@raspberrypi:/home/pi# curl -sL https://raw.githubusercontent.com/home-assistant/hassio-installer/master/hassio_install.sh | bash -s -- -m raspberrypi3
[Warning] No NetworkManager support on host.
[Info] Install supervisor Docker container
packet_write_wait: Connection to fe80::233b:33dc:8d3e:eb75%en0 port 22: Broken pipe

Yesterday it did pass but then hassio had troubles successfully launching. It got the below error in the logs, not sure what caused it.
error /usr/share/www/manifest.json

Now trying to install hassio again, any suggestions are welcome. I'm going to try a different SD card and wifi connection instead of ethernet.

[monte]

@Sebex you could try connecting a monitor and keyboard directly to RPi and running install script. Broken pipe means something is braking connection to ssh host. I can't really say what it is for sure, maybe just excessive CPU usage, or running out of ram? But that would be strange.
If you have backed up you HA setup, why not just flash clean Raspbian image and run install script on it. If it worked before, I don't see why it wouldn't work again.

And that piece of output you wrote, suggests you are using IPv6 for ssh connection. Is there any reason for this?

[Sebex]

@monte good idea I'll try that.

Regarding IPv6, there's no particular reason and I haven't noticed actually. I have been using ssh pi@raspberrypi.local to login, I can also connect directly to the IPv4 address. You think that can resolve it?

[monte]

@Sebex okay, I've googled for you, there are plenty reportings of similar issues. It may be caused by insufficient power supply. On intense CPU usage it may lack current. Try getting better power supply rated at 2.5A, 5V.

[Sebex]

@monte man you're 100% right. Now that I have connected external screen/keyboard, it actually reports the low voltage quite regularly in cmd line... I've ordered one and should solve the issue :grin:

[Sebex]

This post is deleted!

[Sebex]

Here I am again, I had a second node running and tried to make it battery powered but it doesn't seem to work on battery only. Anyway along the process of finding out what the problem is I encountered two other problems:

• I'm getting a ERROR accept: Bad file descriptor in mysgw, only 1 instance seems to be running though:

Any suggestions on this?

  PID TTY      STAT   TIME COMMAND
    1 ?        Ss     0:05 /sbin/init
    2 ?        S      0:00 [kthreadd]
    3 ?        I<     0:00 [rcu_gp]
    4 ?        I<     0:00 [rcu_par_gp]
    8 ?        I<     0:00 [mm_percpu_wq]
    9 ?        S      0:00 [ksoftirqd/0]
   10 ?        I      0:05 [rcu_sched]
   11 ?        I      0:00 [rcu_bh]
   12 ?        S      0:00 [migration/0]
   13 ?        S      0:00 [cpuhp/0]
   14 ?        S      0:00 [cpuhp/1]
   15 ?        S      0:00 [migration/1]
   16 ?        S      0:00 [ksoftirqd/1]
   17 ?        I      0:00 [kworker/1:0-mm_percpu_wq]
   19 ?        S      0:00 [cpuhp/2]
   20 ?        S      0:00 [migration/2]
   21 ?        S      0:00 [ksoftirqd/2]
   23 ?        I<     0:00 [kworker/2:0H-kblockd]
   24 ?        S      0:00 [cpuhp/3]
   25 ?        S      0:00 [migration/3]
   26 ?        S      0:00 [ksoftirqd/3]
   29 ?        S      0:00 [kdevtmpfs]
   30 ?        I<     0:00 [netns]
   33 ?        I      0:00 [kworker/2:1-mm_percpu_wq]
   34 ?        S      0:00 [khungtaskd]
   35 ?        S      0:00 [oom_reaper]
   36 ?        I<     0:00 [writeback]
   37 ?        S      0:00 [kcompactd0]
   38 ?        I<     0:00 [crypto]
   39 ?        I<     0:00 [kblockd]
   40 ?        S      0:00 [watchdogd]
   42 ?        I<     0:00 [rpciod]
   43 ?        I<     0:00 [kworker/u9:0-hci0]
   44 ?        I<     0:00 [xprtiod]
   47 ?        S      0:00 [kswapd0]
   48 ?        I<     0:00 [nfsiod]
   59 ?        I<     0:00 [kthrotld]
   60 ?        I<     0:00 [iscsi_eh]
   61 ?        I<     0:00 [dwc_otg]
   62 ?        I<     0:00 [DWC Notificatio]
   63 ?        S<     0:04 [vchiq-slot/0]
   64 ?        S<     0:01 [vchiq-recy/0]
   65 ?        S<     0:00 [vchiq-sync/0]
   66 ?        S      0:00 [vchiq-keep/0]
   67 ?        S<     0:00 [SMIO]
   69 ?        S      0:00 [irq/86-mmc1]
   71 ?        I<     0:00 [mmc_complete]
   74 ?        I<     0:01 [kworker/0:1H-mmc_complete]
   75 ?        I<     0:00 [kworker/1:1H-kblockd]
   76 ?        S      0:00 [jbd2/mmcblk0p2-]
   77 ?        I<     0:00 [ext4-rsv-conver]
   79 ?        I<     0:00 [ipv6_addrconf]
   96 ?        I<     0:00 [kworker/3:2H-kblockd]
  101 ?        S      0:00 [irq/166-usb-001]
  114 ?        Ss     0:01 /lib/systemd/systemd-journald
  144 ?        Ss     0:01 /lib/systemd/systemd-udevd
  159 ?        S<     0:00 [SMIO]
  181 ?        I<     0:00 [mmal-vchiq]
  183 ?        I<     0:00 [mmal-vchiq]
  185 ?        I<     0:00 [mmal-vchiq]
  198 ?        I<     0:00 [cfg80211]
  202 ?        I<     0:00 [brcmf_wq/mmc1:0]
  203 ?        S      0:00 [brcmf_wdog/mmc1]
  247 ?        Ssl    0:00 /lib/systemd/systemd-timesyncd
  290 ?        Ss     0:55 /usr/local/bin/mysgw -q
  295 ?        Ss     0:00 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd.socket --user nobody --deviceglob /dev/input/ev
  297 ?        Ss     0:00 /usr/sbin/cron -f
  298 ?        Ss     0:01 avahi-daemon: running [raspberrypi.local]
  299 ?        Ss     0:01 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
  303 ?        Ssl    0:00 /usr/sbin/rsyslogd -n -iNONE
  311 ?        Ss     0:00 /lib/systemd/systemd-logind
  315 ?        SNs    0:00 /usr/sbin/alsactl -E HOME=/run/alsa -s -n 19 -c rdaemon
  319 ?        Ss     0:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
  344 ?        SLsl   0:00 /usr/sbin/rngd -r /dev/hwrng
  356 ?        S      0:00 avahi-daemon: chroot helper
  395 ?        I      0:00 [kworker/2:3-mm_percpu_wq]
  456 ?        Ss     0:00 /sbin/dhcpcd -q -w
  461 ?        Ss     0:01 /usr/sbin/nmbd --foreground --no-process-group
  463 ?        Ssl    0:00 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
  466 ?        Ssl    0:02 /usr/bin/containerd
  467 ?        Ssl    0:11 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
  468 tty1     Ss+    0:00 /sbin/agetty -o -p -- \u --noclear tty1 linux
  469 ?        Ss     0:00 /usr/sbin/sshd -D
  479 ?        S      0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow - b8:27:eb:d7:7e:1b
  481 ?        I<     0:00 [kworker/u9:2-hci0]
  483 ?        Ss     0:00 /usr/lib/bluetooth/bluetoothd
  489 ?        Ss     0:00 sshd: pi [priv]
  511 ?        Ss     0:01 /lib/systemd/systemd --user
  514 ?        S      0:00 (sd-pam)
  525 ?        Ss     0:00 /usr/sbin/smbd --foreground --no-process-group
  536 ?        R      0:03 sshd: pi@pts/0
  539 pts/0    Ss     0:01 -bash
  542 ?        S      0:00 /usr/sbin/smbd --foreground --no-process-group
  543 ?        S      0:00 /usr/sbin/smbd --foreground --no-process-group
  552 ?        S      0:00 /usr/sbin/smbd --foreground --no-process-group
  794 ?        Ss     0:00 /bin/sh /usr/sbin/hassio-supervisor
  821 ?        Sl     0:01 docker start --attach hassio_supervisor
  873 ?        Sl     0:00 containerd-shim -namespace moby -workdir /var/lib/containerd/io.containerd.runtime.v1.linux/moby/af8bfda572398f9806ba54d
  890 ?        Ss     0:00 s6-svscan -t0 /var/run/s6/services
 1045 ?        S      0:00 s6-supervise s6-fdholderd
 1192 ?        Ss     0:00 udevd --daemon
 1267 ?        S      0:00 s6-supervise supervisor
 1271 ?        Ssl    0:17 python3 -m supervisor
 1354 ?        S      0:00 socat UDP-RECVFROM:53,fork UDP-SENDTO:172.30.32.3:53
 1398 ?        Sl     0:00 containerd-shim -namespace moby -workdir /var/lib/containerd/io.containerd.runtime.v1.linux/moby/21403e3385d0ce05418df7e
 1409 ?        Sl     0:00 containerd-shim -namespace moby -workdir /var/lib/containerd/io.containerd.runtime.v1.linux/moby/2b6193b6744b35b8d848671
 1433 ?        Ssl    0:01 coredns -conf /config/corefile
 1437 ?        Ss     0:00 s6-svscan -t0 /var/run/s6/services
 1625 ?        S      0:00 s6-supervise s6-fdholderd
 1919 ?        Ss     0:00 udevd --daemon
 1951 ?        S      0:00 s6-supervise bridge
 1952 ?        S      0:00 s6-supervise pulseaudio
 1955 ?        Ss     0:00 socat UNIX-LISTEN:/data/external/pulse.sock,fork,unlink-early,mode=777 UNIX-CONNECT:/data/internal/pulse.sock
 1956 ?        S<sl   0:05 pulseaudio --system -vvv
 2004 ?        Sl     0:00 containerd-shim -namespace moby -workdir /var/lib/containerd/io.containerd.runtime.v1.linux/moby/00ef0f54f7a780be3af62a1
 2019 ?        Ssl    2:07 /usr/local/bin/python3 -m homeassistant --config /config
 2036 ?        Ss     0:01 udevd --daemon
 2353 ?        Sl     0:00 containerd-shim -namespace moby -workdir /var/lib/containerd/io.containerd.runtime.v1.linux/moby/9ca754987ee52a3a48c5290
 2369 ?        Ss     0:00 /sbin/docker-init -- /init /run.sh
 2462 ?        S      0:00 s6-svscan -t0 /var/run/s6/services
 2487 ?        S      0:00 foreground  if   /etc/s6/init/init-stage2-redirfd   foreground    if     if      s6-echo      -n      --      [s6-init] 
 2488 ?        S      0:00 s6-supervise s6-fdholderd
 2499 ?        S      0:00 foreground  s6-setsid  -gq  --  with-contenv  backtick  -D  0  -n  S6_LOGGING   printcontenv   S6_LOGGING    importas  S
 2632 ?        S      0:02 /usr/local/bin/python /usr/local/bin/hass-configurator /etc/configurator.conf
 2677 ?        S      0:02 /usr/sbin/smbd --foreground --no-process-group
 2837 ?        I<     0:00 [kworker/1:2H]
 2854 pts/0    T      0:00 sudo nano mysensors.conf
 2859 pts/0    T      0:00 nano mysensors.conf
 2903 ?        I      0:00 [kworker/u8:2-events_unbound]
 2937 ?        I<     0:00 [kworker/3:0H]
 2939 ?        I      0:00 [kworker/3:2-mm_percpu_wq]
 2968 ?        I      0:00 [kworker/1:2-events]
 3008 ?        I      0:00 [kworker/u8:0-events_unbound]
 3021 ?        I<     0:00 [kworker/0:2H]
 3022 ?        I      0:00 [kworker/0:0-events]
 3036 ?        I      0:00 [kworker/3:0-events]
 3037 ?        I<     0:00 [kworker/2:2H]
 3043 ?        I      0:00 [kworker/0:1-events_power_efficient]
 3068 ?        I      0:00 [kworker/u8:1-events_unbound]
 3070 ?        I      0:00 [kworker/2:0-mm_percpu_wq]
 3071 ?        I<     0:00 [kworker/3:1H-kblockd]
 3074 ?        I<     0:00 [kworker/0:0H]
 3075 ?        I      0:00 [kworker/3:1-events]
 3076 pts/0    R+     0:00 ps -ax