Still, there seems to be 'someting rotten in the state of Network' where my LAN is concerned. Although the Arduino serial monitor says:
13:03:55.821 -> connected with XXX, channel 6
13:03:55.868 -> ip:192.168.178.4,mask:255.255.255.0,gw:192.168.178.1
13:03:55.915 -> ip:192.168.178.4,mask:255.255.255.0,gw:192.168.178.1
13:04:04.826 -> pm open,type:2 0
when I ping the IP-address I get:
Pinging 192.168.178.4 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.178.4:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
When I use the tool 'Wireless Network Watcher' I do see that a device is connected at 192.168.178.4 with the correct MAC address.
However, when I look at the management page of my FritzBox 7490 modem/router no device is mentioned at 192.168.178.4.
I remain at a loss here.
