RS-485 MODULE



  • Good afternoon,

    I have assembled a sensor and an actuator on rs485. The devices work well. But I would like to find a way to pair devices with rs485 without flashing and without a gateway. To do this, the devices have a button to enable training mode. In this mode, the sensor should send a request, and the actuator should respond. the Received data is stored in the sensor's EEPROM. Tell me if there is such functionality?



  • @YuryPol said in RS-485 MODULE:

    Tell me if there is such functionality?

    Yes, you make your "actuator" (or some other node) into a "gateway." Otherwise you are re-inventing the wheel from scratch and then why even use MySensors?

    Unless I am missing something here?



  • I just saw your contribution on Open Hardware, very nice!

    So, I suppose you are perfectly capable of "reinventing the wheel" 😄 , however, I cannot help but wonder...

    y_tho.jpg

    😄 😄 😄


Log in to reply
 

Suggested Topics

  • 90
  • 3
  • 5
  • 3
  • 4
  • 1

0
Online

11.4k
Users

11.1k
Topics

112.6k
Posts