RS-485 MODULE
-
Good afternoon,
I have assembled a sensor and an actuator on rs485. The devices work well. But I would like to find a way to pair devices with rs485 without flashing and without a gateway. To do this, the devices have a button to enable training mode. In this mode, the sensor should send a request, and the actuator should respond. the Received data is stored in the sensor's EEPROM. Tell me if there is such functionality?
-
Good afternoon,
I have assembled a sensor and an actuator on rs485. The devices work well. But I would like to find a way to pair devices with rs485 without flashing and without a gateway. To do this, the devices have a button to enable training mode. In this mode, the sensor should send a request, and the actuator should respond. the Received data is stored in the sensor's EEPROM. Tell me if there is such functionality?
@YuryPol said in RS-485 MODULE:
Tell me if there is such functionality?
Yes, you make your "actuator" (or some other node) into a "gateway." Otherwise you are re-inventing the wheel from scratch and then why even use MySensors?
Unless I am missing something here?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login