MQTT & openhab

Totche

Hello,

I'm stuck with openhab configuration => Embedded browser not available.

No more handles [Could not detect registered XULRunner to use]
org.eclipse.swt.SWTError: No more handles [Could not detect registered XULRunner to use]
	at org.eclipse.swt.SWT.error(SWT.java:4387)
	at org.eclipse.swt.browser.Mozilla.create(Mozilla.java:695)
	at org.eclipse.swt.browser.Browser.<init>(Browser.java:99)
	at org.eclipse.ui.internal.browser.BrowserViewer.<init>(BrowserViewer.java:224)
	at org.eclipse.ui.internal.browser.WebBrowserView.createPartControl(WebBrowserView.java:48)
	at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPartControl(CompatibilityPart.java:138)
	at org.eclipse.ui.internal.e4.compatibility.CompatibilityView.createPartControl(CompatibilityView.java:155)
	at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:313)
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
	at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
	at java.lang.reflect.Method.invoke(Unknown Source)
	at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
	at org.eclipse.e4.core.internal.di.InjectorImpl.processAnnotated(InjectorImpl.java:861)
	at org.eclipse.e4.core.internal.di.InjectorImpl.processAnnotated(InjectorImpl.java:841)
	at org.eclipse.e4.core.internal.di.InjectorImpl.inject(InjectorImpl.java:113)
	at org.eclipse.e4.core.internal.di.InjectorImpl.internalMake(InjectorImpl.java:321)
	at org.eclipse.e4.core.internal.di.InjectorImpl.make(InjectorImpl.java:242)```

Which versions have to be installed for java and eclipse ?

I read the forums but it's obscure....

Thanks

EDit : It seems that it's not possible to have the designer working (some answers in other forums)

Totche

Ok, so I leave aside the designer .

I set-up openhab like => MQTT Broker gateway

mqtt:mysensor.url=tcp://192.168.1.234:1883
mqtt:mysensor.clientId=MQTT`

and for the items
`
Group all
Group node1 (all)
Group node2 (all)
Group sketch (all)

Number node1_temperature "Temperature [%.1f °C]" (node1,all) {mqtt="<[mysensor:MyMQTT/20/10/V_TEMP:state:default]"}
Number node1_humidite "Humidite [%.1f %%Rh]" (node1,all) {mqtt="<[mysensor:MyMQTT/20/11/V_HUM:state:default]"}```

The Id are set auto in the sketch

For the sketch, the serial result is :

repeater started, id 10
send: 10-10-0-0 s=255,c=0,t=18,pt=0,l=5,st=ok:1.4.1
send: 10-10-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 10-10-0-0 s=255,c=3,t=11,pt=0,l=18,st=ok:Temp, lumin, hygro
send: 10-10-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 10-10-0-0 s=0,c=0,t=6,pt=0,l=5,st=ok:1.4.1
send: 10-10-0-0 s=1,c=0,t=16,pt=0,l=5,st=ok:1.4.1
send: 10-10-0-0 s=2,c=0,t=7,pt=0,l=5,st=ok:1.4.1
Temperature : 13.80 C
send: 10-10-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:13.8
Luminosite : 79 lx
send: 10-10-0-0 s=1,c=1,t=23,pt=3,l=2,st=ok:79
Temperature hygro : 14.00C
send: 10-10-0-0 s=2,c=1,t=1,pt=7,l=5,st=ok:93.0
Hygrometrie : 93.00%
Temperature : 13.90 C
send: 10-10-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:13.9
Luminosite : 85 lx
send: 10-10-0-0 s=1,c=1,t=23,pt=3,l=2,st=ok:85
Temperature hygro : 14.00C

So at this moment, everything seems to be ok

But when i try to select the first line (Tempearture, humidite....), i have a blue line

Sans titre.jpg

The ping works

C:\Users\Ludo>ping 192.168.1.234

Envoi d'une requête 'Ping' 192.168.1.234 avec 32 octets de données :
Réponse de 192.168.1.234 : octets=32 temps=6 ms TTL=128
Réponse de 192.168.1.234 : octets=32 temps=1 ms TTL=128
Réponse de 192.168.1.234 : octets=32 temps=1 ms TTL=128
Réponse de 192.168.1.234 : octets=32 temps=1 ms TTL=128

Statistiques Ping pour 192.168.1.234:
Paquets : envoyés = 4, reçus = 4, perdus = 0 (perte 0%),
Durée approximative des boucles en millisecondes :
Minimum = 1ms, Maximum = 6ms, Moyenne = 2ms

I read somewhere that Id was autodealed (gw.begin(NULL, AUTO, true);) but my Id node is 10.
Normaly should'nt be from 20 to 254 ?

So what is wrong with the definitions ?
In the items definition, (mysensor:MyMQTT/20/10/) what are 20 and 10 ?

Thanks for any help

Totche

The blue line disappeared when i reduced the text length
id 10 and 11 => ClearEeprom : it's ok now

But always request node Id for both nodes,

Same question as above => In the items definition, (mysensor:MyMQTT/20/10/) what are 20 and 10 ?

Sans titre.jpg

Sans titre1.jpg

Thanks

Xander

"20" is the node id of the sender. Your node id is 10. See: "send: 10-10-0-0 s=255,c=0,t=18,pt=0,l=5,st=ok:1.4.1"

"10" is the child id of this particular sensor. Your node has the child id's:

"0" : send: 10-10-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:13.8
"1" : send: 10-10-0-0 s=1,c=1,t=23,pt=3,l=2,st=ok:79
"2" : send: 10-10-0-0 s=2,c=1,t=1,pt=7,l=5,st=ok:93.0

20-20-0-0
 |  | | |
 |  | | Id of Destination node
 |  | ID of next node
 |  Id of last node this message passed
 Id of sender node (origin)


s = child-sensor-id, 255 für "interne" Messages
c = message-type
t = sub-type
pt = payload-type (see MyMessage.h)
l = length of payload

Totche

@Xander Thanks for the answer.

For the auto-dealing with Ids, who did it ? Openhab or the gateway ?, or are the Ids fixed with (mysensor:MyMQTT/20/10/) ?

Thanks

Xander

The node id is from the gateway. The child id is given by you in your sketch.

Totche

@Xander Ok,

I just keep the gateway and the repeater.

repeater started, id 255
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
BMP180 Initialisation OK
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
Pression : 1010.47 hPa
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:

0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:

It seems that the gateway don't give an Id to the repeater

Totche

So back to serial gateway.

req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
sensor started, id 255
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:

0;0;3;0;14;Gateway startup complete.
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
255;255;3;0;3;
0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:

Are you sure that the gateway gives the Id ?
Ethernet, MQTT and serial gateways never send back ids to the nodes in my case.

When I force the Id, it's working and the gateway "shows" the values

repeater started, id 20
send: 20-20-0-0 s=255,c=0,t=18,pt=0,l=5,st=ok:1.4.1
send: 20-20-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 20-20-0-0 s=255,c=3,t=11,pt=0,l=17,st=fail:Repeter, pression
send: 20-20-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
BMP180 Initialisation OK
send: 20-20-0-0 s=0,c=0,t=8,pt=0,l=5,st=ok:1.4.1
Pression : 998.68 hPa
send: 20-20-0-0 s=0,c=1,t=4,pt=2,l=2,st=ok:998
send: 20-20-0-0 s=0,c=1,t=5,pt=0,l=7,st=ok:inconnu

0;0;3;0;14;Gateway startup complete.
0;0;3;0;9;read: 20-20-0 s=255,c=0,t=18,pt=0,l=5:1.4.1
20;255;0;0;18;1.4.1
0;0;3;0;9;read: 20-20-0 s=255,c=3,t=6,pt=1,l=1:0
20;255;3;0;6;0
0;0;3;0;9;read: 20-20-0 s=255,c=3,t=12,pt=0,l=3:1.0
20;255;3;0;12;1.0
0;0;3;0;9;read: 20-20-0 s=0,c=0,t=8,pt=0,l=5:1.4.1
20;0;0;0;8;1.4.1
0;0;3;0;9;read: 20-20-0 s=0,c=1,t=4,pt=2,l=2:998
20;0;1;0;4;998
0;0;3;0;9;read: 20-20-0 s=0,c=1,t=5,pt=0,l=7:inconnu
20;0;1;0;5;inconnu

Xander

I'm not shure what your configuration is. You have:

a sensor node
a repeater Node
a serial / MQTT Gateway node
3 nodes - is this OK?

Or is your sensor node the repeater too. I don't know if this is possible.

In case of a repeater node I'm not shure but I think the gateway is allways the "master" of all id's.

Totche

@Xander Thanks for the answer

For now, I have a MQTT controller, one repeater node with a BMP180 sensor (to do the forecast on a long time, as by definition the repeater never sleeps, with a modified sketch and a timer of 1 seconde), and an another node with temperature, luminance and hymidity sensors.

After some readings , i think that the gateway doesn't provide the Id, it's the role of the controller

=> in this discussion, you can read that, it's for Vera controller

Your going to want a controller in the long term. For testing you can either hard code the node ID in the sketch (you will want to flash the EEPROM clear sketch when you get a controller)

The reason your not seeing the temp on the gateway is because it doesn't get sent if there is no node ID.

Basically the node is asking the gateway/controller who am I and the controller isn't responding so it just keeps asking.

=> I use openHAb instead of Vera, and there is XXX.items file where you define the Ids for node and child

Number node1_temp  "Temp [%.1f °C]"     (node1,all)  {mqtt="<[mysensor:MyMQTT/20/10/V_TEMP:state:default]"}
Number node1_humid "Humid [%.1f %%Rh]" (node1,all)  {mqtt="<[mysensor:MyMQTT/20/11/V_HUM:state:default]"}

So I think that in this case, if the Ids are "constants" in openhab, they can't be randomly dealed by the gateway, and have to be fixed in each node

I just tested by giving Id to the nodes, and all seems correct

MQTT gateway

Started!
0;0;3;0;9;read: 20-20-0 s=255,c=0,t=18,pt=0,l=5:1.4.1
0;0;3;0;9;read: 20-20-0 s=255,c=3,t=6,pt=1,l=1:0
0;0;3;0;9;read: 20-20-0 s=255,c=3,t=12,pt=0,l=3:1.0
0;0;3;0;9;read: 20-20-0 s=0,c=0,t=8,pt=0,l=5:1.4.1
0;0;3;0;9;read: 20-20-0 s=0,c=1,t=4,pt=2,l=2:1012
0;0;3;0;9;read: 20-20-0 s=0,c=1,t=5,pt=0,l=7:inconnu
0;0;3;0;9;read: 21-21-0 s=255,c=0,t=17,pt=0,l=5:1.4.1
0;0;3;0;9;read: 21-21-0 s=255,c=3,t=6,pt=1,l=1:0
0;0;3;0;9;read: 21-21-0 s=255,c=3,t=11,pt=0,l=18:Temp, lumin, hygro
0;0;3;0;9;read: 21-21-0 s=255,c=3,t=12,pt=0,l=3:1.0
0;0;3;0;9;read: 21-21-0 s=0,c=0,t=6,pt=0,l=5:1.4.1
0;0;3;0;9;read: 21-21-0 s=1,c=0,t=16,pt=0,l=5:1.4.1
0;0;3;0;9;read: 21-21-0 s=2,c=0,t=7,pt=0,l=5:1.4.1
0;0;3;0;9;read: 21-21-0 s=0,c=1,t=0,pt=7,l=5:20.1
0;0;3;0;9;read: 21-21-0 s=1,c=1,t=23,pt=3,l=2:20
0;0;3;0;9;read: 21-21-0 s=2,c=1,t=1,pt=7,l=5:59.0

Repeater node

repeater started, id 20
send: 20-20-0-0 s=255,c=0,t=18,pt=0,l=5,st=ok:1.4.1
send: 20-20-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 20-20-0-0 s=255,c=3,t=11,pt=0,l=17,st=fail:Repeter, pression
send: 20-20-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
BMP180 Initialisation OK
send: 20-20-0-0 s=0,c=0,t=8,pt=0,l=5,st=ok:1.4.1
Pression : 1012.27 hPa
send: 20-20-0-0 s=0,c=1,t=4,pt=2,l=2,st=ok:1012
send: 20-20-0-0 s=0,c=1,t=5,pt=0,l=7,st=ok:inconnu

Sensors node

sensor started, id 21
send: 21-21-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 21-21-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
send: 21-21-0-0 s=255,c=3,t=11,pt=0,l=18,st=ok:Temp, lumin, hygro
send: 21-21-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 21-21-0-0 s=0,c=0,t=6,pt=0,l=5,st=ok:1.4.1
send: 21-21-0-0 s=1,c=0,t=16,pt=0,l=5,st=ok:1.4.1
send: 21-21-0-0 s=2,c=0,t=7,pt=0,l=5,st=ok:1.4.1
Temperature : 20.10 C
send: 21-21-0-0 s=0,c=1,t=0,pt=7,l=5,st=ok:20.1
Luminosite : 20 lx
send: 21-21-0-0 s=1,c=1,t=23,pt=3,l=2,st=ok:20
Temperature hygro : 19.00C
send: 21-21-0-0 s=2,c=1,t=1,pt=7,l=5,st=ok:59.0
Hygrometrie : 59.00%
Luminosite : 20 lx
Temperature hygro : 19.00C

Totche

Re,

Sans titre.jpg
I tried to use MYSController without success

The IP is 192.168.1.234:1883 for the MQTT controller , but I can't read any values with the browser and MYSController.
And as you can see in the serial monitors, the nodes seem to discuss together.

I don't know how to check the communication with the MQTT gateway, apparently the problem comes from him
Any tips, ?

Thanks

Xander

I use a client ( MQTT.fx http://www.jensd.de/wordpress/?cat=50 ) to test the mqtt gateway. Please see my post: http://forum.mysensors.org/topic/953/how-to-know-the-node-ids-assigned-by-the-mqtt-gateway-to-the-sensors/2

With this tool I can see if the gateway is working and which id's are used. Then I configure OpenHAB accordingly.

Totche

@Xander Thanks

Very great link, now I can see what is sent.

1)-
Sans titre.jpg

2- The ip in MQTT.fx is the same as in openhab.cfg

mqtt:mysensor.url=tcp://192.168.1.234:1883
 mqtt:mysensor.clientId=MQTT

Sans titre1.jpg

3- test.items

Group all
Group meteo //(all)
Group noeud_1  (meteo)
Group noeud_2  (meteo)
//Group sketch (all)

Number noeud1_temperature  "Temperature [%.1f °C]"    (noeud_1, all)  {mqtt="<[mysensor:MyMQTT/21/0/V_TEMP:state:default]"}
Number noeud1_luminosite   "Luminosite [%.0f Lux]"  (noeud_1, all)  {mqtt="<[mysensor:MyMQTT/21/1/V_LIGHT_LEVEL:state:default]"}
Number noeud1_humidite     "Humidite [%.0f Rh]"     (noeud_1, all)  {mqtt="<[mysensor:MyMQTT/21/2/V_HUM:state:default]"}

4- openHAB runtime

Launching the openHAB runtime...
osgi> 2015-04-01 20:28:05.432 [INFO ] [.o.core.internal.CoreActivator] - openHAB
 runtime has been started (v1.6.2).
2015-04-01 20:28:06.066 [INFO ] [o.o.i.s.i.DiscoveryServiceImpl] - mDNS service
has been started
2015-04-01 20:28:06.189 [INFO ] [o.o.i.s.i.DiscoveryServiceImpl] - Service Disco
very initialization completed.
2015-04-01 20:28:07.134 [INFO ] [penhab.io.rest.RESTApplication] - Started REST
API at /rest
2015-04-01 20:28:15.943 [INFO ] [c.internal.ModelRepositoryImpl] - Loading model
 'test.sitemap'
2015-04-01 20:28:16.055 [INFO ] [c.internal.ModelRepositoryImpl] - Loading model
 'test.items'
2015-04-01 20:28:16.653 [INFO ] [.o.u.w.i.servlet.WebAppServlet] - Started Class
ic UI at /openhab.app

And finally........................... Sans titre2.jpg

nothing

PS : i don't see the repeater with the barometer, I need to dissociate them so one nano more

GuyP

Did you restart openHAB after you entered the MQTT gateway IP address in the configuration file? You don't need to restart when changing items, or sitemaps.

You should check that openHAB has made a connection to the MQTT gateway.

netstat -an |grep 1883

root@openHAB:~# netstat -an |grep 1883
tcp6       0      0 192.168.40.201:42199    192.168.40.200:1883     ESTABLISHED
root@openHAB:~#

Do you see it listed? If not restart the gateway, it should connect within a few minutes.

Totche

@GuyP Thanks for reply

I'm using windows 7, so I can't use your command, and see if connection is made

The IP in openHAB is set since the beginning, and I never changed.

Xander

... but "netstat -an" should work!

Totche

@Xander I have that

C:\Users\Totche>netstat -an|find "1883"
  TCP    0.0.0.0:1883           0.0.0
  UDP    10.10.10.170:61883

:

GuyP

that shows you have a listener, but nothing connected!

Are you running the gateway on this PC? if so the openhab configuration should be localhost or 127.0.0.1:1883.

Totche

@GuyP Now I can see that

C:\Users\Totche>netstat -an|find "1883"
  TCP    192.168.1.13:25638     192.168.1.134:1883     ESTABLISHED
  UDP    0.0.0.0:61883          *:*

The last Ip 192.168.1.234 was out of range with the router definitions

Sans titre.jpg

But no more values in openHAB, pfff

Totche

And tonight, the weird is back

C:\Users\Totche>netstat -an|find "1883"
  TCP    0.0.0.0:1883           0.0.0.0:0              LISTENING

In openHAB.fx, I can see the msgs from the node, so I suppose that the ethernet connection is working

With MYSController, nothing displayed, no node network

Sans titre.jpg

With the serial, I can see the exchanges between node and the MQTTgateway

So what's wrong ? The Gateway, a port redirection ????

tekka

@Totche Just for clarification: MYSController is not compatible with MQTT gateways but with serial gw. .

Totche

@tekka Ah OK, it's better to know it, thanks;

And I found the error this morning and it works great......

To create the configuration file for openHAB, I made a copy/paste of the Mysensors example., and I haven't seen it was a space character at the beginning of each lines.

I removed it, and it's working fine.now

So be carefull with the spaces, it was a stupid mistake and boring to find.

I have done this test 5 times, so I'm sure that it's the problem.

Thank you everybody....

MQTT & openhab

Suggested Topics

Boxes and Enclosures
Enclosures / 3D Printing • • PITP2

OH3 Serial Gateway Problem
OpenHAB • • seppi9

OH2.5.9 / ethernet gateway / autodiscovery?
OpenHAB • • Stefferd

openHAB 2.2 binding
OpenHAB • • TimO

openHAB 2.5 binding and V_VARx
OpenHAB • • syntacrsc

OH3 - MySensors Binding
OpenHAB • • Peter Loeffler

15
Online

11.4k
Users

11.1k
Topics

112.7k
Posts

MQTT & openhab

Suggested Topics

Boxes and Enclosures Enclosures / 3D Printing • • PITP2

OH3 Serial Gateway Problem OpenHAB • • seppi9

OH2.5.9 / ethernet gateway / autodiscovery? OpenHAB • • Stefferd

openHAB 2.2 binding OpenHAB • • TimO

openHAB 2.5 binding and V_VARx OpenHAB • • syntacrsc

OH3 - MySensors Binding OpenHAB • • Peter Loeffler

15Online

11.4kUsers

11.1kTopics

112.7kPosts

Boxes and Enclosures
Enclosures / 3D Printing • • PITP2

OH3 Serial Gateway Problem
OpenHAB • • seppi9

OH2.5.9 / ethernet gateway / autodiscovery?
OpenHAB • • Stefferd

openHAB 2.2 binding
OpenHAB • • TimO

openHAB 2.5 binding and V_VARx
OpenHAB • • syntacrsc

OH3 - MySensors Binding
OpenHAB • • Peter Loeffler

15
Online

11.4k
Users

11.1k
Topics

112.7k
Posts