Vertorix - Easily Create your Own Mesh Network with Sensors and Controllers
Vertorix last edited by
I have created a new IOT project which allows the user to easily create a mesh network of sensors and control End devices.
All programming of devices is done in the open source Arduino IDE, and there are already libraries and examples available. It's really easy to make your own network because all the mesh network side is automated. There is no stuffing around with complex wireless libraries, you just take your sensor readings and send them.
You can use Node-red to create Dashboards and forward messages to MQTT etc.
See Documentation here: link text
The VT1100 in sleep mode consumes 7uA, so can run on battery for years.
I'm trying to gauge interest in the project. If there is enough interest I will sell the devices cheaply.