GWT:TPC:CONNECTING
-
Thanks a lot @electrik ... but I was on stable release when the problem has began.
For this reason I download the DEV version, but I have the same problem.There is surely something stupid think that is wrong, but I don't know what is it.
This gateway was working for more than a month.Thanks again
Denis -
And if you change the lines like below now?
@smilvert said in GWT:TPC:CONNECTING:
it dosen't. But when I changed the delay to 3000
bool gatewayTransportConnect(void)
{
#if defined(MY_GATEWAY_ESP8266) || defined(MY_GATEWAY_ESP32)
if (WiFi.status() != WL_CONNECTED) {
GATEWAY_DEBUG(PSTR("GWT:TPC:CONNECTING...\n"));
delay(3000); // Was 1000
return false;
}
GATEWAY_DEBUG(PSTR("GWT:TPC:IP=%s\n"), WiFi.localIP().toString().c_str());in MyGatewayTransportMQTTClient.cpp then it started to work!
-
@electrik said in GWT:TPC:CONNECTING:
gatewayTransportConnect
I changed it:
bool gatewayTransportConnect(void) { #if defined(MY_GATEWAY_ESP8266) || defined(MY_GATEWAY_ESP32) if (WiFi.status() != WL_CONNECTED) { GATEWAY_DEBUG(PSTR("GWT:TPC:CONNECTING...\n")); delay(3000); // denis: era 1000 dar l am schimbat pt. ca nu se lega la MQTT return false; } GATEWAY_DEBUG(PSTR("GWT:TPC:IP=%s\n"), WiFi.localIP().toString().c_str()); #elif defined(MY_GATEWAY_LINUX) #if defined(MY_IP_ADDRESS) _MQTT_ethClient.bind(_MQTT_clientIp); #endif /* End of MY_IP_ADDRESS */ #elif defined(MY_GATEWAY_TINYGSM) GATEWAY_DEBUG(PSTR("GWT:TPC:IP=%s\n"), modem.getLocalIP().c_str()); #else #if defined(MY_IP_ADDRESS) Ethernet.begin(_MQTT_clientMAC, _MQTT_clientIp); #else /* Else part of MY_IP_ADDRESS */ // Get IP address from DHCP if (!Ethernet.begin(_MQTT_clientMAC)) { GATEWAY_DEBUG(PSTR("!GWT:TPC:DHCP FAIL\n")); _MQTT_connecting = false; return false; } #endif /* End of MY_IP_ADDRESS */ GATEWAY_DEBUG(PSTR("GWT:TPC:IP=%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8 "\n"), Ethernet.localIP()[0], Ethernet.localIP()[1], Ethernet.localIP()[2], Ethernet.localIP()[3]); // give the Ethernet interface a second to initialize delay(1000); #endif return true; }But in this case I get this error:
29 MCO:BGN:INIT GW,CP=RPNGF---,FQ=240,REL=0,VER=2.4.0-alpha 34 TSF:LRT:OK 35 TSM:INIT 37 TSF:WUR:MS=0 39 TSM:INIT:TSP OK 40 TSM:INIT:GW MODE 42 TSM:READY:ID=0,PAR=0,DIS=0 45 MCO:REG:NOT NEEDED 159 GWT:TPC:CONNECTING... 3162 MCO:BGN:STP 3164 MCO:BGN:INIT OK,TSP=1 3166 GWT:TPC:IP=192.168.1.170 3169 GWT:RMQ:CONNECTING... 3371 GWT:RMQ:OK 3372 GWT:TPS:TOPIC=MySensors-out/0/255/0/0/18,MSG SENT Stack smashing protect failure! abort() was called at PC 0x40134cef on core 1 ELF file SHA256: 0000000000000000 Backtrace: 0x40088620:0x3ffb1eb0 0x4008889d:0x3ffb1ed0 0x40134cef:0x3ffb1ef0 0x400d27e6:0x3ffb1f10 0x400d281e:0x3ffb1f50 0x400d2a23:0x3ffb1f70 0x400d2ff4:0x3ffb1f90 0x400d3105:0x3ffb1fb0 0x400898ae:0x3ffb1fd0 Rebooting... ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:1216 ho 0 tail 12 room 4 load:0x40078000,len:10944 load:0x40080400,len:6388 entry 0x400806b4 29 MCO:BGN:INIT GW,CP=RPNGF---,FQ=240,REL=0,VER=2.4.0-alpha 34 TSF:LRT:OK 36 TSM:INIT 37 TSF:WUR:MS=0 39 TSM:INIT:TSP OK 40 TSM:INIT:GW MODE 42 TSM:READY:ID=0,PAR=0,DIS=0 45 MCO:REG:NOT NEEDED 164 GWT:TPC:CONNECTING... 3166 MCO:BGN:STP 3168 MCO:BGN:INIT OK,TSP=1 3170 GWT:TPC:IP=192.168.1.170 3173 GWT:RMQ:CONNECTING... 6058 GWT:RMQ:OK 6059 GWT:TPS:TOPIC=MySensors-out/0/255/0/0/18,MSG SENT Stack smashing protect failure! abort() was called at PC 0x40134cef on core 1 ELF file SHA256: 0000000000000000 ...from here it goes in LOOPI'm near to become creasy :-(
Thanks again
Denis -
@electrik said in GWT:TPC:CONNECTING:
2.3.2 release
I can't believe... IT'S WOOOOOOORK !!!
Thanks a lot @electrik !!!I don't know why, and I don't understand... but with 2.3.2 release it's work if I make that modify in the MyGatewayTransportMQTTClient.cpp file.
Also I don't like that I must modify that time... but for now it's ok.
Also I don't understand why 2 days ago it's change same hardware and same soft,
from work to no work (I don't know haw to tell this in english) :-)Thanks so much again :-)
Denis -
@electrik said in GWT:TPC:CONNECTING:
Perhaps a GitHub issue should be raised for these points...
Well... if the DEV version is not work even if I make that change... I don't know.
I thinks this part is too sensibile. I'm not a programmer, but I think that this important part of communication must be renovate.Tomorrow I can return to my node sensors test.
Thanks a lot all for the help.
Denis -
@smilvert said in GWT:TPC:CONNECTING:
A ticket is raised quite long time ago
Thanks a lot... I put my case there also, maybe can help.
That gui use same ESP32 DevKit V1 like me.Strange that I didn't fount that page in this 2 days of research.
Thanks a lot
Denis
