Wierd issue with a nano

[Corvl]

Hello all ,

I have now 4 nano's in use with my sensor stuff on it, all working fine.
Today I wanted to make an arduino with a temperature sensor on it.

But it doesn't want to include on my vera 3

I tried several radio's ( even one which is definately working on another arduino). I also "burnt" a new bootloader on it. But no luck including it.

The sketch uploads fine .

When I upload the "blink" sketch from the example library , the led blinks.

Besides throwing this nano (clone) away , is there anything else I can do? it's wierd that the blinking sketch works fine.

Any ideas?

Thanks,
Cor

[AWI]

@Corvl what do you see on the serial interface?

[Heinz]

I had a similar issue.
Clearing the EEPROM helped me out. (see http://www.mysensors.org/build/debug).

[Corvl]

Thanks for the anwers.

Clearing the eprom did the Job.

Cor