Replace 2.4GHz remote controllers
Zwippet last edited by
First want to say that I'm overwhelmed of the information on this site and don't know where to begin. This is why I'm placing this post.
I own several Remote controllers to control a: IR Panel, LED ceiling lamp and LED AliExpress lamp (see picture). I thought to simply capture and replay the RF 2.4GHz signals with some to replace the Remote controllers. This to add some RF device to my Raspberry Pi with Home Assistant.
I came across this site: https://www.rflink.nl and bought a Arduino Mega 2560 and a NRF24L01 (see picture). I put it together but sadly I can't get it to work.
Than I came across this site and have hope again.
- Should/Could it be possible to record and replay the RF 2.4GHz signals of the remote controls? Some are saying that that there are many protocols etc.
- Can I use my Arduino setup and some software from this site to accomplish this?
monte last edited by
@Zwippet the link you provided answers most of your questions:
That's the list of devices supported by rflink firmware. If yours aren't among them, I guess they won't work.
Mysensors work within it's own protocol and doesn't support any 3d party commercial products as per my knowledge.
JeeLet last edited by
"Mysensors fonctionne selon son propre protocole et ne prend en charge aucun produit commercial" yes
the beginning of a track can be useful for you ?