Safe In-Wall AC to DC Transformers??

[Pierre P]

Do you want some tips to make "safe" crash tests ? Like putting it in a closed electrical box and switch on and off an old vacuum with no electronic ? Or make a shortcut make the relay ko... Because you cannot test that if you don't have a good electrical installation at home...

[sundberg84]

@Pierre-P That i have tested (the vacuum test) and the fuses blew... i was thinking about a long but not high overload.

[alexsh1]

@punter9 said:

http://lygte-info.dk/review/Power Mains to 5V 0.6A Hi-Link HLK-PM01 UK.html

Please see this:

https://skippy.org.uk/5v-acdc-converter-switch-power-supply-module-3w-700ma-industrial-voltage-regulators/

1. It does not comply with the UK standards (I live in the UK)
2. It is dangerous and not safe.

[sundberg84]

Yes, if you read the threads about this - we have alof of those examples... thats why we are using the HLK-PM01 and are having this discussion. That link is not about the HLK-PM01 @punter9

Edit: that guy you linked to tested the HLK as well:

"While it is not great, I would consider using it on my own projects, however it would need filtering on the mains side if I was going to use it in a project I was going to place on the market (read as sell), as under my control I can keep an eye on it causing unwanted interference with other equipment, this is why we have the limits set in the standards."

and if you read our conclusions from this thread its the same.

[alexsh1]

@sundberg84 Did you see it? The guy is using fuse (Farnell part number 2464451) and varistor (Farnell part number 1004390) for HLK-PM01. It is 0.8A fuse

[sundberg84]

@alexsh1 Yea i saw it - and the text say: "I got this generic even cheaper board" - its not a HLK he is testing...

[alexsh1]

@sundberg84 Yes it is - sorry I am now talking about this link https://skippy.org.uk/quick-look-at-the-hlk-pm01/

This is the fuse he is using
http://uk.farnell.com/bussmann-by-eaton/c310fc-800-r-tr1/fuse-pcb-0-8a-250vac-fast-act/dp/2464451?selectedCategoryId=&exaMfpn=true&categoryId=&searchRef=SearchLookAhead

This is a fast act 250V 0.8A fuse

[sundberg84]

@alexsh1 - Yea, ok - we have discussed that test above in this thread as well.
As far as I know the HLK is the best so far.

We also have another test where we have got different advice about fuses, (normal/temp) and varistor (see above).
Im accually using a 0,2A fuse for 240V. Read through this post if you are interested - its a great discussion.

[alexsh1]

@sundberg84 I have gone almost through the whole topic. Excellent discussion!

I think the difference is that you are using the slow blow fuse 0.2A and he is using fast acting 0.8A one. I really wonder which one would be more safe. I know slow blow fuses are used with inductive load (like motors), but not sure about this application.

I know it has been mentioned here as well, but did you make any provision for a thermal SEFUSE (say, 73C) or do you think it would be too much?

[m26872]

Let's hope skippy.org.uk also will recommend some good EMC line filters for the HLK-PM01 soon.

[m26872]

And about that cheap converter test. Since is an open type one with high res pictures from seller - too bad he didn't test an arbitrary other where the failed "visual inspection" could have passed simply by a look at the pictures. (I even think those blue caps could be small ceramic safety ones).

Btw, found a version of EN 60335 here.

[alexsh1]

@m26872 said:

Btw, found a version of EN 60335 [here].

I've used this link

[m26872]

@alexsh1 Thanks, it was better in every sense.

[sundberg84]

@alexsh1 said:

I think the difference is that you are using the slow blow fuse 0.2A and he is using fast acting 0.8A one. I really wonder which one would be more safe. I know slow blow fuses are used with inductive load (like motors), but not sure about this application.

I know it has been mentioned here as well, but did you make any provision for a thermal SEFUSE (say, 73C) or do you think it would be too much?

Its a good a releveant question... im not sure about slow or fast, but when i read the slow blow can tolerate high levels of voltage for a short period and a fast (or quick) blow fuse is a fuse that bursts instantly when high power voltage is passed through it.

How i see it, we have the protection against high quick power voltages allready in the Varistor? (Im not educated in this - this is my brain/logic trying to add everything up). Allthough what i read is what you are saying - slow blow are often used in motors and fast blow on home appliaces.

In my PCB I use a 73dgr therma fuse as well, im using the exact same circut that petewill has in its first post in this thread.

[alexsh1]

@sundberg84

The varistor is against high voltage transients and surges. The fuse is for overcurrent.

I have just ordered 0.8A fast blow fuses - they will be installed on my boards.

[sundberg84]

@alexsh1 - yes offcourse, you are right - mixed that up.
I have some 0.5 fast blow - sounds like thats a better idea than slow blow @petewill.

[alexsh1]

@sundberg84 Given that HLK-PM01 can withstand current spikes to 1.0A, I decided to go for a 0.8A fast blow fuse. Additionally, having a thermal fuse would be an advantage, but not a must. Unless you want to push the PSU to around 600mA then it is going to operate close to its limit and you need some extra protection

[sundberg84]

@alexsh1 - what do you base it on, its not a must? Im trying to be as safe as possible :) but i really wants to learn as much as possible about safety regarding ac/dc converting.

[alexsh1]

@sundberg84 Obviously, there is no harm from having it, but if your consumption is, say, 150ma and the PSU is handling 600ma, this is just an extra in my view.

Did you see the IR images taken after about 45 minutes of operation over here?

[sundberg84]

@alexsh1 said:

150mA

Ok, sounds logic - tnx. If I want to run a relay and some sensors it might be higher than 150mA so I like the extra safety :) Yea, have read that review about 100 times now, and emailed the dude as well for questions, haha. Much to learn!