Home Automation - multi-sensor nodes
My Home Automation project use My Sensors 1.5 and Home-Assistant, communicating via MQTT.
I plan to install in each room several sensors (Gas/Smoke, PIR, Water leak, Temperature, Humidity) and Relays (2 to 4, local control also using IR remote).
While the project is still beta, I would like to share with you what I have achieved until now, mainly the code for gateway and nodes. The code is here: https://github.com/Mihai258/HomeAssistant-MySensors-MQTT , it contains the standard gateway from MySensor site and modified nodes to use one or several sensors, a lot of combinations are presented. A configuration file for Home-Assistant is also presented, it helps to understand how to manage the messages from MySensors.
The gateway contains Arduino UNO + Ethernet shield + NRF24, the nodes contains Arduino Nano + NRF24 + sensors.
I have tested my nodes and they works fine on the table. I will come back with more information and details, but it will take some time to get all components and to build the whole system. I also plan to move to MySensors 1.6 (my tests are on-going here).
maxtox last edited by
please check that out:
tell me if you want to jump in and we make together a solutuion for comunity!
I have updated my project to use MySensors 2.0.0 beta from development branch with the following main changes:
- MQTT broker is external, you may use mosquitto for example;
- the Gateway allow sensors; examples included with several sensors on the gateway
- Arduino Mega may be used for the Gateway and/or nodes; in the Gateway sketch I have mention the connections for NRF24
- multi-sensor nodes examples.
I have tested all of them and they are worked.
The project is presented here: https://github.com/Mihai258/MySensors2-HomeAssistant-MQTT
@maxtox: my expertise level in IoT is not so high for your project, I am still learning in this area.
Luke Corkill last edited by
@Mihai - thanks for these; nice clear examples of multiple sensors and handling incoming messages
My project is in running phase, I posted detailed description of functions, code and pictures on Openhardware site here: https://www.openhardware.io/view/55.
foad62 last edited by
I followed your GitHub to set MQTT broker (MySensors 2) but I couldn't succeed. MySensors MQTT Gateway Terminal is saying:
Attempting MQTT connection...
I also couldn't undestand the role of mosquitto here because it is not mentioned at the Home Assistant website too!
Sorry for late reply... If you use MQTT Gateway you need an MQTT broker. I was using mosquitto as a broker. At HA site they mention it at MQTT component page: https://home-assistant.io/components/mqtt/ but now they also have one internal broker available, so they are many available possibilities.
Mr6510 last edited by
Thanks Mihai, I have been struggling with getting my first basic Home Assistant + MySensors via MQTT working. Your examples got it all going for me. Thanks again for taking the effort to post.
Announcements • • hek