@DJONvl

very COOL...you user ioBroker with VIS!!!!

Hello colleagues,

i did not forget you ... just a new video showing how to get Let's encrypt certificate in "seconds" without coding etc.. just pressing couple buttons.

Its possible with ioBroker, look here:

ioBroker + Let's Encrypt use HTTPS for AUTOMATION OF EVERYTHING - Pine64, Arduino, FHEM, Raspi – 07:12
— Jewgeni R

Now i made a video to explain how to use TELEGRAM with iobroker and mysensors

look here

ioBroker.telegram -TELEGRAM Interface for AUTOMATION OF EVERYTHING - Arduino, FHEM, Homatic, Raspi – 13:06
— Jewgeni R

and screenshots from EDIT page of iobroker.flot:

and picture of the Page when you click "OPEN":

or if you choose AREA you'll see:

couple screenshots from the WEB interface ioBroker.web

and here a video how to use MySensors with ioBroker to CONTROL and get the Information from EVERYWHERE:

ioBroker.WEB -ioBroker.MOBILE Interface for AUTOMATION OF EVERYTHING - Arduino, FHEM, Homatic, Raspi – 27:41
— Jewgeni R

[UPDATE]

It runns PRODUCTIVE incl Heatpump, Solar, Wood stove etc..

I devidesd INO apart, so it is easyer to read...


Included SERIAL1 , SERIAL2, SERIAL3 ...


My scope was:

"a" Node which i can connect what i want to and with a simple and smalest modifications, can run EVERYTHING! :-)
it should be cheap!
it should be easy so even me as noob can understand that
4.it should be a standard protocol, which can be used with all of teh adapters
it should have updates in the future
6 can be used with node-red and ioBroker, because everything is integrated there
7 etc..

do's and dont's for me:

do not mess with child ID's and PIN's ->Use something easy
show to the server what you have (present) and show what it is!!!! Not just Child ID = 13 -> Send a discription to Server
do it universal, so everybody can use it !!!
Give it to the comunity to improve it !!!

My steps:

HERE THE USER SHOULD PUT HIS SENSORS IN THE TABLE
create a table with pins, so if you change configuration you do not have to mess around with PIN's:


you can put all you attached sensors with S-Types and S_Variables

USER does not have to do enything!!!

present everything (all connected or IF YOU WANT unconnected pins too).
whole void presentation! so just easy and short "i think"

Setup (just look in samples of MYsensors and you will see if you need it or not

void setup()
{
	//Serial1.begin(2400);
	//Serial2.begin(2400);
	
	for (int i = 0; i<iomodus_count; i++) //search All Sensor system Ports and set them in the RIGHT way
    {
		while (iomodus[i].sensorVersion == "MY_SystemPin") { i++; }  //do not waste time to check MY_SystemPin's
		MyMessage msg(i, iomodus[i].variableType);
//*************************************************************************************
//*************************************************************************************

//********************************Setup RELAY***************************************
		if (iomodus[i].sensorType == S_BINARY)
        {
#ifdef RELAY
			if (iomodus[i].sensorVersion == "RELAY")
			{
				pinMode(i, OUTPUT);
				// Set RELAY to last known state (using eeprom storage)
				digitalWrite(i, loadState(i) ? RELAY_ON : RELAY_OFF);
				send(msg.setSensor(i).set(loadState(i)==HIGH ? 1 : 0),false);
			}
#endif // RELAY

//********************************Setup BUTTON***************************************
#ifdef BUTTON
			if (iomodus[i].sensorVersion == "BUTTON")
			{
				pinMode(i, INPUT_PULLUP);
				// Set RELAY to last known state (using eeprom storage)
				digitalWrite(i, loadState(i) ? 1 : 0);
				send(msg.setSensor(i).set(loadState(i)==HIGH ? 1 : 0),false);
			}
#endif // BUTTON
		}
//********************************Setup 0-10V Output***************************************
#ifdef PWM
		if (iomodus[i].sensorType == S_DIMMER) 
        {
			pinMode(i, OUTPUT);
			// Set RELAY to last known state (using eeprom storage)
		}
		
		....

or next example

void ds18b20_temp(int i)
{
#ifdef DS18B20
	if ((iomodus[i].sensorType == S_TEMP) && (iomodus[i].sensorVersion == "DS18B20"))
    { 	
		if (millis() > next_Time[i])
        {   
			next_Time[i] = next_Time[i] + 10000; //onewire updates every 10s (10s is MINIMUM)
			sensor[i].requestTemperatures();
			// query conversion time and sleep until conversion completed
			//  int16_t conversionTime = sensor[i].millisToWaitForConversion(sensor[i].getResolution());
			// sleep() call can be replaced by wait() call if node need to process incoming messages (or if node is repeater)
			wait(1000);
    
			for (int j = 1; j <= dsSensor_count; j++)
			{
				if (dsSensor[j].dsonPinNr ==  i)
				{
					unsigned int dsPin=(iomodus[i].Int_to_HLP + j);
					float tempC = sensor[i].getTempC(dsSensor[j].dsAdress);
					if (tempC == -127.00) 
					{
/*            			send(msg.setType(77).set("Error getting temperature"), false);
						Serial.println("Error getting temperature on Pin");
						Serial.print(i);
						Serial.println("MySensors Pin Nr");
						Serial.print(dsPin);
						Serial.println("Probe Nr.");
						Serial.print(j);
*/
					} 
					else
					{
						MyMessage msg(i, iomodus[i].variableType);
						send(msg.setSensor(dsPin).set(tempC, 2), false);
						last_dsTemp[j] = tempC;
    /*        			        Serial.println("C: ");
						Serial.print(tempC);
						Serial.println(" F: ");
						Serial.print(DallasTemperature::toFahrenheit(tempC));
    */        		}
	//					dsPin=0;
              
				}
                    
			}
        }
	}
#endif
}

!
Done!
Libraries here(modified 16.06.2016):

0_1466331530661_MySensors.zip

All sketches:
0_1466331582101_PRODUKTIV_V1.zip

@hek

hi... sorry did not know this

would be nice if you could do that... so people can get started with the new stuff !

isn't it just SEXY ?

@hek

hi ... sorry we were trying new things with mysensors and iobroker...

now you can use

TELEGRAMM,
APP @ ANDRID
and MANY new Icons @ VIS...

When do you think u can put iobroker on your HP? or do u need something?