How to take a reading from MiCS 4514
-
I am confused with MiCS 4514 sensor. What I had done is :
- using MiCS quick start evaluation board, measured ADC value
- calculated Vout and from that calculated R0.
- Rs/R0 concentration gives me high value, which is not possible, My data is as follows
clean air file is used for the purpose of R0 value
https://drive.google.com/file/d/0B8sF8a6FHoseWjhWOHRoYzIxakk/view?usp=sharing
and Polluted file is used to calculate the actual pollution
https://drive.google.com/file/d/0B8sF8a6FHoseR1BnclhCUHdibEU/view?usp=sharingI am confused. Please help me
-
is your R0 in Ohm or KOhm in your formula ?
-
In clean air, I calculated the value of R0 by using MiCS quick evaluation board.
Formula applied :(ADC/(RESOLUTION - ADC)) * 51820---for NO2
and (ADC/(ADC-RESOLUTION))*100820 -- for COand in polluted air I applied same formula and gave it a name Rs
Then took ratio of Rs/R0 which is less than one.
So I had a slope and its constant meand y = m*x + c
But i do not know how to derive equation to find out the value of ppm from Rs/0
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login