Grounding...
-
I am currently planning on switching from WiFi MQTT to serial gateway and will be using arduino nano connected to raspberry3
So arduino will receive it's power from the USB port.
Than there will be an NRF24PA version so planning on powering it from a separate 5V source converted via 1117 to 3,3V
My question is on the ground. The ground pin from NRF24 should be connected to the power supply and in parallel to the GND pin of arduino? -
Yes. The two power supplies need a common reference, so the grounds need to be connected.
BR Jonas
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login