Gateway hardware
-
I am ready to go from my prototype breadboard gateway to more of a finished product. Was wondering if anyone has any recommendations on which arduino/rf/nic modules are best for a more permanent installation?
I have seen some 3dprinted enclosures and will probably go that route for my case, but am wondering if anyone has recommendations for the hardware.
-
@Jason-Brunk I would recommend going for something newer like this:
https://github.com/hallard/WeMos-RFM69
there is a lora version if you want to be too innovative:
(currently not working with MySensors)https://github.com/hallard/WeMos-Lora
The GWs above are very small - you can choose a custom enclosure easily.
PS My recommendation would be RFM69 rather than NRF24
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login