RFM69CW Continuous Mode
-
He everyone,
I am using RFM69CW module and I need to use it in continuous mode to transmit some sensor data in real time, but I did not find any clear way how to connect the module to the microcontroller, in the datasheet the configurations in this mode are DIO1/DCLK and DIO2/DATA but I did not figure out how to connect these pins and how to communicate with the module ?
any suggestions or examples please ?
best regards -
Hello
For answering to pins connection in continuous mode i think you can connect it to the pins you want, and poll or irq.
But, RFM69 driver for Mysensors uses Packet Mode. not Continuous mode.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login