I can't find on google or on the forum how to make an esp8266 based gateway with a local relay connected report the state of the relay back to my controller(which is a vera, but that should't matter). Thanks for the help.
@Dwalt oh wow.. thanks so much.. i was waiting for you to get back to me but never saw this post.. and i just happened to stumble on it when i was looking to see if you had been back on the forum or not.
I'm good with the hardware side of things and can shell script and do windows scripting. but still have not learned this coding yet.
i have all the hardware for the 433 stuff.
i even got the RF stuff to work (on my RPI2) and sniffed all my codes
i could just never get it to work with my arduino stuff.
likely the code, so i'm excited to give your code a go.
Thanks!
@Shivanand-Chanderbally I recently finished a node using the acs712 and found it to be very sensitive to nearby magnetic fields. It is best to have it as far away from these as you can.
Hi @blackchart,
Unfortunately, all devices are sold out. Further production is possible only when ordering more than 10 devices (in this case, I also can modify the device to suit your needs).