nrf24l01 problem



  • Hello! When i run scanner example on RF24, i see nothing else than zeros. I'm preety sure that i'd connected the radio module well. Does anyone know any issues? Thanks!

    SPI device = /dev/spidev0.0
    SPI speed = 8000000
    CE GPIO = 25
    STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0
    RX_ADDR_P0-1 = 0xe7e7e7e7e7 0xc2c2c2c2c2
    RX_ADDR_P2-5 = 0xc3 0xc4 0xc5 0xc6
    TX_ADDR = 0xe7e7e7e7e7
    RX_PW_P0-6 = 0x00 0x00 0x00 0x00 0x00 0x00
    EN_AA = 0x00
    EN_RXADDR = 0x03
    RF_CH = 0x4c
    RF_SETUP = 0x07
    CONFIG = 0x0f
    DYNPD/FEATURE = 0x00 0x00
    Data Rate = 1MBPS
    Model = nRF24L01+
    CRC Length = 16 bits
    PA Power = PA_MAX
    000000000000000011111111111111112222222222222222333333333333333344444444444444445555555555555555666666666666666677777777
    0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef01234567
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000


Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.