water level sketch info
-
On the Build section of my sensors under moisture, there contains a sketch for soil dampness, but I wish to use the water level sensor, for a sump pump back up.
I noticed it has an analog output and the soil sketch is for digital o/p.
Is there a sketch I could use with my setup to use as an alarm/level reporting to my serial gw and verlite controller. -
On the Build section of my sensors under moisture, there contains a sketch for soil dampness, but I wish to use the water level sensor, for a sump pump back up.
I noticed it has an analog output and the soil sketch is for digital o/p.
Is there a sketch I could use with my setup to use as an alarm/level reporting to my serial gw and verlite controller. -
I'm planning on setting up a similar setup to top up a header tank for toilet water from a large tank. I have a couple of floats and a distance sensor.
My initial idea was to use the distance sensor to trigger pump but I now think I'm going to use 1 float to trigger the pump when the header thank is low and the 2nd float will be at the bottom the large tank to stop the pump running if there is no water left. I will use the distance sensor to update a display inside the house to show how much water is in the storage tank.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login