Repeater Node not working, pls help debug...



  • Hi,

    unfortunately I can´t get my first repeater node to work. Actually it worked a few times, now I only get these messages and it is not communicating correctly with my GW:

    Log Parser Link

    This is my repeater node code:

    // Repeater Node1, Repeater Nodes starten bei ID 50
    //#define MY_DEBUG
    #define MY_RADIO_NRF24 //MySensor Library auf NRF24 Funkmodul einstellen, muss vor MySensor.h Initialisierung geschehen
    // Define Node ID
    #define MY_NODE_ID 50
    #define MY_PARENT_NODE_ID 0
    #define MY_PARENT_NODE_IS_STATIC
    #define MY_REPEATER_FEATURE
    
    #include <MySensors.h>
    #include <SPI.h>
    #include "Timer.h"
    
    
    //Variables
    Timer t;
    
    //Messages
    
    //Presentation; present sensors to gateway!
    void presentation(){
      // Send the sketch version information to the gateway and Controller
      sendSketchInfo("Repeater Node 1", "1.0");
      wait(500);
    }
    
    //Setup
    void setup()  
    {  
      Serial.begin(9600);
      sendImAlive();
      t.every(60000, sendImAlive);
    }
    
    //Starte den Loop
    void loop() 
    {
      Serial.println("Sending Update...");
      t.update();
      Serial.println("...Done!");
    } 
    
    void sendImAlive() {
        sendHeartbeat();
    }
    
    

    I hope you can help me! Thanks in advance!!!


  • Mod

    NACK usually it is a range issue if the radio module is working correctly. Try putting repeater node closer to the gateway


Log in to reply
 

Suggested Topics

117
Online

10.6k
Users

10.8k
Topics

111.1k
Posts