openHAB 2.2 binding
-
Ok I reflashed the gateway and it's gotten a little better. Still have some errors though.
Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed. -
Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed.Wow, you are right of course. Debugging is indeed enabled... but than I can just ignore the errors, thank you.
@TimO said in openHAB 2.2 binding:Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed. -
So I disabled debug output on the gateway to avoid the error messages but I still have problems with my setup. I used to have a motion sensor that worked with openhab. Now when the sensor sends a motion event to the gateway nothing happens in openhab.
Part of the log of the motion sensor:
6236 TSF:MSG:SEND,11-11-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:1 6307 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 6367 TSF:TDI:TSL 6385 MCO:SLP:WUP=-1 6406 TSF:TRI:TSB 6424 MCO:SLP:MS=86400000,SMS=0,I1=1,M1=1,I2=255,M2=255 6481 TSF:TDI:TSL 6500 MCO:SLP:WUP=1 6520 TSF:TRI:TSB 6541 TSF:MSG:SEND,11-11-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:1 6612 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 6670 TSF:TDI:TSLSo it seems like the message gets send succesfully but on the openhab log I see no mentioning of that (although I enable debug output for mysensors and I can switch on/off some led nodes). Any ideas why? I really want to get this working again.
-
Sorry for bothering you guys, I figured out the problem: I have installed domoticz on the same raspberry and after a restart I forgot to turn it off. So all the missing data was "hidden" away by domoticz instead of openhab.
-
Sorry for bothering you guys, I figured out the problem: I have installed domoticz on the same raspberry and after a restart I forgot to turn it off. So all the missing data was "hidden" away by domoticz instead of openhab.
@LastSamurai :smile:
I'm glad you've found the problem, I was out of ideas. ;-) -
The problem is that the motion sensor still doesn't show up at the gateway although it gets an answer from it. I disabled domoticz though so I need to find another reason ;( Earlier it showed up in domoticz ... strange. I will try to change the id and see if OH picks it up then.
Btw @TimO Any idea yet when you will be able to work on the github issues I posted? -
@LastSamurai I can't say when I'm able to solve those issues.
According the ACK problem I need to enable ACK support in my network at home, which was something I already wanted to do a long time ago but haven't found the time yet.
The RGBW is a tough nut for me. I don't have a RGBW node to test with and the conversion HSB <=> RGBW is driving me crazy. The algorithm for the conversion can be found here: https://github.com/tobof/openhab2-addons/blob/MySensors_Binding/addons/binding/org.openhab.binding.mysensors/src/main/java/org/openhab/binding/mysensors/converter/MySensorsRGBWTypeConverter.java
@gonzalonal May I ask you to add an issue on github? This would allow me track those enhancement requests. Thank you!
-
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
-
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
-
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
Please kindly check my contribution in the git issue. Maybe it will help to clarify your issues.
@LastSamurai said in openHAB 2.2 binding:
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
-
@gonzalonal I saw it earlier but did not understand it fully. I will take another look at it later.
@TimO I might have found the error... maybe. I reflashed the motion sensor (with cleared eeprom before) and removed the static id and signing. Now I see that the problem seems to be that the node is unable to get an ID. Any idea what's happening herer? Is there a setting concerning that somewhere?
Log from the node:
... 102477 TSM:FAIL:RE-INIT 102479 TSM:INIT 102488 TSM:INIT:TSP OK 102490 TSM:FPAR 102492 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 103426 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 103432 TSF:MSG:FPAR OK,ID=0,D=1 104501 TSM:FPAR:OK 104503 TSM:ID 104503 TSM:ID:REQ 104507 TSF:MSG:SEND,255-255-0-0,s=55,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 106516 TSM:ID 106516 TSM:ID:REQ 106520 TSF:MSG:SEND,255-255-0-0,s=20,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 108529 TSM:ID 108529 TSM:ID:REQ 108533 TSF:MSG:SEND,255-255-0-0,s=241,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 110542 TSM:ID 110542 TSM:ID:REQ 110546 TSF:MSG:SEND,255-255-0-0,s=206,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 112556 !TSM:ID:FAIL 112558 TSM:FAIL:CNT=6 112560 TSM:FAIL:DIS 112562 TSF:TDI:TSL ...Log from the openhab server:
15:21:32.127 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;34;3;0;3; 15:21:34.135 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;0;3;0;3; 15:21:36.147 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;221;3;0;3; ...and lots more similar requests with different ids.
-
@gonzalonal I saw it earlier but did not understand it fully. I will take another look at it later.
@TimO I might have found the error... maybe. I reflashed the motion sensor (with cleared eeprom before) and removed the static id and signing. Now I see that the problem seems to be that the node is unable to get an ID. Any idea what's happening herer? Is there a setting concerning that somewhere?
Log from the node:
... 102477 TSM:FAIL:RE-INIT 102479 TSM:INIT 102488 TSM:INIT:TSP OK 102490 TSM:FPAR 102492 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 103426 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 103432 TSF:MSG:FPAR OK,ID=0,D=1 104501 TSM:FPAR:OK 104503 TSM:ID 104503 TSM:ID:REQ 104507 TSF:MSG:SEND,255-255-0-0,s=55,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 106516 TSM:ID 106516 TSM:ID:REQ 106520 TSF:MSG:SEND,255-255-0-0,s=20,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 108529 TSM:ID 108529 TSM:ID:REQ 108533 TSF:MSG:SEND,255-255-0-0,s=241,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 110542 TSM:ID 110542 TSM:ID:REQ 110546 TSF:MSG:SEND,255-255-0-0,s=206,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 112556 !TSM:ID:FAIL 112558 TSM:FAIL:CNT=6 112560 TSM:FAIL:DIS 112562 TSF:TDI:TSL ...Log from the openhab server:
15:21:32.127 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;34;3;0;3; 15:21:34.135 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;0;3;0;3; 15:21:36.147 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;221;3;0;3; ...and lots more similar requests with different ids.
@LastSamurai Upgrade the binding. You're using the current beta of MySensors and the request for I'd has changed.
-
@LastSamurai Upgrade the binding. You're using the current beta of MySensors and the request for I'd has changed.
@TimO Ahh thank you! I am using version 2.2 linked in the first post of this thread though. Where do I get a newer version? Maybe I overlooked it but I am not seeing any newer releases.
-
@TimO Ahh thank you! I am using version 2.2 linked in the first post of this thread though. Where do I get a newer version? Maybe I overlooked it but I am not seeing any newer releases.
@LastSamurai just replace the jar from the link above. I'm doing small changes from time to time.
-
@LastSamurai just replace the jar from the link above. I'm doing small changes from time to time.
@TimO Thank you again for the help. Everything is now back up and running :+1: With the new jar my node could finally get a new id and after also enabling signing again everything worked as expected.
Can I see anywhere that you updated the jar file? I am using the current beta of mysensors mostly so I would also need to use an updated version of the openhab plugin. -
@TimO , is this binding supported via mysensors MQTT gateway?
In previous bending inormation you had some text indicating that you would implement it. But all that is gone.
So I'm thinking you either implemented it, or aborted that feature :) -
@TimO , is this binding supported via mysensors MQTT gateway?
In previous bending inormation you had some text indicating that you would implement it. But all that is gone.
So I'm thinking you either implemented it, or aborted that feature :)@Nicklas-Starkel It happens, that MQTT support is sadly still on the to do list. There were some changes in the Smarthome MQTT library and we need to adopt them now.
Here's the Issue: https://github.com/tobof/openhab2-addons/issues/98
-
@Nicklas-Starkel It happens, that MQTT support is sadly still on the to do list. There were some changes in the Smarthome MQTT library and we need to adopt them now.
Here's the Issue: https://github.com/tobof/openhab2-addons/issues/98
@TimO, cool that you are stil on it, even if it's on the "todo-list".
Kudos and keep up the great work :) -
Can we use this binding for MQTT once the PR is available in OpenHAB?
It is a separate mqtt generic binding in ESH for things discovery but I cannot make out if this will solve the dependency issue or not.
https://github.com/eclipse/smarthome/pull/3876
