openHAB 2.2 binding
-
Hi TimO, I am interested in Mqtt version of binding as I like the flexibility of my system with Mqtt. I see that Sean has already a PR open for this quite some time and I do not see any reason why his changes would break things. Any idea when can we expect this to be merged. Also I have just started getting involved in things and although don't have much time but will try to contribute around this area.
-
Hi TimO, I am interested in Mqtt version of binding as I like the flexibility of my system with Mqtt. I see that Sean has already a PR open for this quite some time and I do not see any reason why his changes would break things. Any idea when can we expect this to be merged. Also I have just started getting involved in things and although don't have much time but will try to contribute around this area.
Hi @gahlawathome !
The code for the MQTT support is only working within the development environment. If I try to compile a jar, there is a dependency problem which I was not yet able to solve. There is MQTT support in ESH and in OpenHAB. The MQTT binding needs the one from Openhab because it is still based on Openhab 1. The MQTT support in the binding needs to be based on ESH, but you can't fulfill both dependencies because only one library at a time is allowed.
I need to check if there has been some development on a MQTT 2.x binding, that would solve the problem.
-
Hi @gahlawathome !
The code for the MQTT support is only working within the development environment. If I try to compile a jar, there is a dependency problem which I was not yet able to solve. There is MQTT support in ESH and in OpenHAB. The MQTT binding needs the one from Openhab because it is still based on Openhab 1. The MQTT support in the binding needs to be based on ESH, but you can't fulfill both dependencies because only one library at a time is allowed.
I need to check if there has been some development on a MQTT 2.x binding, that would solve the problem.
@TimO Thank you very much for a very clear explanation. I will also search around MQTT 2.x on OpenHAB and post here if I find something relevant.
-
@TimO Hope you had a nice vacation!
Is there already some new version of the binding to test?I was on vacation too lately and when I powered my openhab system back on I got lots of problems with my gateway and sensor connections. First I got a never ending circle of failing startup checks (although I could already switch lights). After I disabled the check it seemed to work. But when restarting a sensor node (that did not send any values after the controller restart) I got this error:
16:55:54.552 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;159004 Skipping security for command 3 type 16 16:55:54.604 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 0;255;3;0;9;159011 TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=16,pt=0,l=0,sg=0,ft=0,st=OK: 16:55:54.747 [WARN ] [rsAbstractConnection$MySensorsReader] - Exception on reading from connection java.io.IOException: Underlying input stream returned zero bytes at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:288)[:1.8.0_144] at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:326)[:1.8.0_144] at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:178)[:1.8.0_144] at java.io.InputStreamReader.read(InputStreamReader.java:184)[:1.8.0_144] at java.io.BufferedReader.fill(BufferedReader.java:161)[:1.8.0_144] at java.io.BufferedReader.readLine(BufferedReader.java:324)[:1.8.0_144] at java.io.BufferedReader.readLine(BufferedReader.java:389)[:1.8.0_144] at org.openhab.binding.mysensors.internal.protocol.MySensorsAbstractConnection$MySensorsReader.run(MySensorsAbstractConnection.java:335)[205:org.openhab.binding.mysensors:2.2.0.201707241115] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)[:1.8.0_144] at java.util.concurrent.FutureTask.run(FutureTask.java:266)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)[:1.8.0_144] at java.lang.Thread.run(Thread.java:748)[:1.8.0_144]Any idea why or how to fix this? Everything was working fine before
PS I also just got another error while switching a light (the light still worked though):
17:08:31.549 [WARN ] [rsAbstractConnection$MySensorsReader] - Exception on reading from connection java.text.ParseException: class java.text.ParseException : Message length is not > 4 at org.openhab.binding.mysensors.internal.protocol.message.MySensorsMessage.parse(MySensorsMessage.java:337)[205:org.openhab.binding.mysensors:2.2.0.201707241115] at org.openhab.binding.mysensors.internal.protocol.MySensorsAbstractConnection$MySensorsReader.run(MySensorsAbstractConnection.java:345)[205:org.openhab.binding.mysensors:2.2.0.201707241115] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)[:1.8.0_144] at java.util.concurrent.FutureTask.run(FutureTask.java:266)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)[:1.8.0_144] at java.lang.Thread.run(Thread.java:748)[:1.8.0_144] 17:08:31.678 [WARN ] [rsAbstractConnection$MySensorsReader] - Exception on reading from connection java.io.IOException: Underlying input stream returned zero bytes at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:288)[:1.8.0_144] at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:326)[:1.8.0_144] at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:178)[:1.8.0_144] at java.io.InputStreamReader.read(InputStreamReader.java:184)[:1.8.0_144] at java.io.BufferedReader.fill(BufferedReader.java:161)[:1.8.0_144] at java.io.BufferedReader.readLine(BufferedReader.java:324)[:1.8.0_144] at java.io.BufferedReader.readLine(BufferedReader.java:389)[:1.8.0_144] at org.openhab.binding.mysensors.internal.protocol.MySensorsAbstractConnection$MySensorsReader.run(MySensorsAbstractConnection.java:335)[205:org.openhab.binding.mysensors:2.2.0.201707241115] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)[:1.8.0_144] at java.util.concurrent.FutureTask.run(FutureTask.java:266)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)[:1.8.0_144] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)[:1.8.0_144] at java.lang.Thread.run(Thread.java:748)[:1.8.0_144] -
Ok I reflashed the gateway and it's gotten a little better. Still have some errors though.
-
Ok I reflashed the gateway and it's gotten a little better. Still have some errors though.
Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed. -
Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed.Wow, you are right of course. Debugging is indeed enabled... but than I can just ignore the errors, thank you.
@TimO said in openHAB 2.2 binding:Hi @LastSamurai !
You've debug enabled on the gateway, have you? Looks like the binding does not like the (debug) output from the gateway.
But the binding should recover just fine from the exception, only the (debug) message that has lead to this exception won't be parsed. -
So I disabled debug output on the gateway to avoid the error messages but I still have problems with my setup. I used to have a motion sensor that worked with openhab. Now when the sensor sends a motion event to the gateway nothing happens in openhab.
Part of the log of the motion sensor:
6236 TSF:MSG:SEND,11-11-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:1 6307 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 6367 TSF:TDI:TSL 6385 MCO:SLP:WUP=-1 6406 TSF:TRI:TSB 6424 MCO:SLP:MS=86400000,SMS=0,I1=1,M1=1,I2=255,M2=255 6481 TSF:TDI:TSL 6500 MCO:SLP:WUP=1 6520 TSF:TRI:TSB 6541 TSF:MSG:SEND,11-11-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:1 6612 MCO:SLP:MS=30000,SMS=0,I1=255,M1=255,I2=255,M2=255 6670 TSF:TDI:TSLSo it seems like the message gets send succesfully but on the openhab log I see no mentioning of that (although I enable debug output for mysensors and I can switch on/off some led nodes). Any ideas why? I really want to get this working again.
-
Sorry for bothering you guys, I figured out the problem: I have installed domoticz on the same raspberry and after a restart I forgot to turn it off. So all the missing data was "hidden" away by domoticz instead of openhab.
-
Sorry for bothering you guys, I figured out the problem: I have installed domoticz on the same raspberry and after a restart I forgot to turn it off. So all the missing data was "hidden" away by domoticz instead of openhab.
@LastSamurai :smile:
I'm glad you've found the problem, I was out of ideas. ;-) -
The problem is that the motion sensor still doesn't show up at the gateway although it gets an answer from it. I disabled domoticz though so I need to find another reason ;( Earlier it showed up in domoticz ... strange. I will try to change the id and see if OH picks it up then.
Btw @TimO Any idea yet when you will be able to work on the github issues I posted? -
@LastSamurai I can't say when I'm able to solve those issues.
According the ACK problem I need to enable ACK support in my network at home, which was something I already wanted to do a long time ago but haven't found the time yet.
The RGBW is a tough nut for me. I don't have a RGBW node to test with and the conversion HSB <=> RGBW is driving me crazy. The algorithm for the conversion can be found here: https://github.com/tobof/openhab2-addons/blob/MySensors_Binding/addons/binding/org.openhab.binding.mysensors/src/main/java/org/openhab/binding/mysensors/converter/MySensorsRGBWTypeConverter.java
@gonzalonal May I ask you to add an issue on github? This would allow me track those enhancement requests. Thank you!
-
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
-
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
-
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
Please kindly check my contribution in the git issue. Maybe it will help to clarify your issues.
@LastSamurai said in openHAB 2.2 binding:
@gonzalonal said in openHAB 2.2 binding:
Yes, sure. I'll do that to keep track.
By the way, I have RGBW led strip and I am using it with mysensors with no issues. Would you mind telling me what's wrong so I can recreate the scenario?
You can find the issues here. Basically you (I ;)) can't set RGBW nodes to display pure white colors via openhab, dimming is not working (error confirmed by TimO) and most importantly ACK isn't working properly (for me at least). If you can help with any of this (especially the conversion HSB <=> RGBW) you are most welcome.
-
@gonzalonal I saw it earlier but did not understand it fully. I will take another look at it later.
@TimO I might have found the error... maybe. I reflashed the motion sensor (with cleared eeprom before) and removed the static id and signing. Now I see that the problem seems to be that the node is unable to get an ID. Any idea what's happening herer? Is there a setting concerning that somewhere?
Log from the node:
... 102477 TSM:FAIL:RE-INIT 102479 TSM:INIT 102488 TSM:INIT:TSP OK 102490 TSM:FPAR 102492 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 103426 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 103432 TSF:MSG:FPAR OK,ID=0,D=1 104501 TSM:FPAR:OK 104503 TSM:ID 104503 TSM:ID:REQ 104507 TSF:MSG:SEND,255-255-0-0,s=55,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 106516 TSM:ID 106516 TSM:ID:REQ 106520 TSF:MSG:SEND,255-255-0-0,s=20,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 108529 TSM:ID 108529 TSM:ID:REQ 108533 TSF:MSG:SEND,255-255-0-0,s=241,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 110542 TSM:ID 110542 TSM:ID:REQ 110546 TSF:MSG:SEND,255-255-0-0,s=206,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 112556 !TSM:ID:FAIL 112558 TSM:FAIL:CNT=6 112560 TSM:FAIL:DIS 112562 TSF:TDI:TSL ...Log from the openhab server:
15:21:32.127 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;34;3;0;3; 15:21:34.135 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;0;3;0;3; 15:21:36.147 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;221;3;0;3; ...and lots more similar requests with different ids.
-
@gonzalonal I saw it earlier but did not understand it fully. I will take another look at it later.
@TimO I might have found the error... maybe. I reflashed the motion sensor (with cleared eeprom before) and removed the static id and signing. Now I see that the problem seems to be that the node is unable to get an ID. Any idea what's happening herer? Is there a setting concerning that somewhere?
Log from the node:
... 102477 TSM:FAIL:RE-INIT 102479 TSM:INIT 102488 TSM:INIT:TSP OK 102490 TSM:FPAR 102492 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 103426 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 103432 TSF:MSG:FPAR OK,ID=0,D=1 104501 TSM:FPAR:OK 104503 TSM:ID 104503 TSM:ID:REQ 104507 TSF:MSG:SEND,255-255-0-0,s=55,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 106516 TSM:ID 106516 TSM:ID:REQ 106520 TSF:MSG:SEND,255-255-0-0,s=20,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 108529 TSM:ID 108529 TSM:ID:REQ 108533 TSF:MSG:SEND,255-255-0-0,s=241,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 110542 TSM:ID 110542 TSM:ID:REQ 110546 TSF:MSG:SEND,255-255-0-0,s=206,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 112556 !TSM:ID:FAIL 112558 TSM:FAIL:CNT=6 112560 TSM:FAIL:DIS 112562 TSF:TDI:TSL ...Log from the openhab server:
15:21:32.127 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;34;3;0;3; 15:21:34.135 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;0;3;0;3; 15:21:36.147 [DEBUG] [rsAbstractConnection$MySensorsReader] - Message from gateway received: 255;221;3;0;3; ...and lots more similar requests with different ids.
@LastSamurai Upgrade the binding. You're using the current beta of MySensors and the request for I'd has changed.
-
@LastSamurai Upgrade the binding. You're using the current beta of MySensors and the request for I'd has changed.
@TimO Ahh thank you! I am using version 2.2 linked in the first post of this thread though. Where do I get a newer version? Maybe I overlooked it but I am not seeing any newer releases.
-
@TimO Ahh thank you! I am using version 2.2 linked in the first post of this thread though. Where do I get a newer version? Maybe I overlooked it but I am not seeing any newer releases.
@LastSamurai just replace the jar from the link above. I'm doing small changes from time to time.
