Use oscillator on nRF24 additionally for ATmega328?
-
I'm considering streamlining my MySensor nodes by replacing the Arduino Mini Pro's by just ATmega328 DIP chips. Since I'm using nRF24l01 modules which already have an oscillator on it, I was wondering whether I can just branch it of at the soldering points and additionally connect it to the clock pins of the 328 MCU? (Thereby saving 2 capacitors and a crystal)
Thanks in advance for any info!
-
no You can't, but You do not need an oscillator for atmega if You do not need precise timings, just use atmegas internal oscillator.
-
no You can't, but You do not need an oscillator for atmega if You do not need precise timings, just use atmegas internal oscillator.
@rozpruwacz
Thanks!
Will consider using the internal one...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login