Ethernet GW how know?
-
im have a question about ethernet gw. im buy one to test with my own controller in .net but when iupload the code i dont know if work or not., if upload from the mysensors page im get check wires, if upload from my pc im view in the serial monitor "Gateway startup complete" and start showing the recieved data from other sensors. but the ethernet work?? i cant connect from my custom controller
-
im have a question about ethernet gw. im buy one to test with my own controller in .net but when iupload the code i dont know if work or not., if upload from the mysensors page im get check wires, if upload from my pc im view in the serial monitor "Gateway startup complete" and start showing the recieved data from other sensors. but the ethernet work?? i cant connect from my custom controller
-
@ch3b7 Are you sure you have enabled SOFTSPI by uncomment #define SOFTSPI in RF24_config.h? It is easy to make the change in the wrong library file and not in the one that is acctually used by the IDE
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login