Ethernet GW how know?

[ch3b7]

im have a question about ethernet gw. im buy one to test with my own controller in .net but when iupload the code i dont know if work or not., if upload from the mysensors page im get check wires, if upload from my pc im view in the serial monitor "Gateway startup complete" and start showing the recieved data from other sensors. but the ethernet work?? i cant connect from my custom controller

[olaeke]

@ch3b7 Are you sure you have enabled SOFTSPI by uncomment #define SOFTSPI in RF24_config.h? It is easy to make the change in the wrong library file and not in the one that is acctually used by the IDE

[ch3b7]

@olaeke yes the softspi is enable. If upload from the pc the radio work