Any solution for PRO MICRO ?

@alexandr-kazakov

Just change to ProMini 328P
and al ok

 
 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.2.0

16 MCO:BGN:INIT NODE,CP=RNNNA---,VER=2.2.0
25 TSM:INIT
26 TSF:WUR:MS=0
33 TSM:INIT:TSP OK
35 TSF:SID:OK,ID=5
37 TSM:FPAR
73 TSF:MSG:SEND,5-5-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
900 TSF:MSG:READ,0-0-5,s=255,c=3,t=8,pt=1,l=1,sg=0:0
905 TSF:MSG:FPAR OK,ID=0,D=1
2080 TSM:FPAR:OK
2081 TSM:ID
2082 TSM:ID:OK
2084 TSM:UPL
2087 TSF:MSG:SEND,5-5-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
4096 TSM:UPL
4098 TSF:MSG:SEND,5-5-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
6106 TSM:UPL
6108 TSF:MSG:SEND,5-5-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
8116 TSM:UPL
8118 TSF:MSG:SEND,5-5-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1

Can any body help
I try to connect PROMICRO 3.3V & NRF24L01

Connect of NRF pins:

• SCK <> 15pin
• MISO <> 14pin
• MOSI <> 16pin
• CSN <> 10pin
• CE <> 9pin
• VCC to 3.3v line
• GND to GND

Load simple example Air Humidity Sensor

But get errors

2640406 TSM:FAIL:RE-INIT
2640406 TSM:INIT
2640412 !TSM:INIT:TSP FAIL
2640412 TSM:FAIL:CNT=7
2640413 TSM:FAIL:DIS
2640413 TSF:TDI:TSL

What i do wrong?